After the update to Firefox 16.0.2 flash vid to youtube started to freeze and plays a few seconds and freezes again, at the same time my computer crashes also?

Similar Questions

• Running two engines step by step at the same time of a port

  Hello

  I have to run two motors at the same time - was used to move a linear ball screw and the other to get a grip. I do voltage and test on small twist wires, but the tension and torsion must be made at the same time. I must also build capacity for each engine to take several steps, IE. have an engine steps number at speed x and then move x number of speed z steps. The two engines must be able to do. However, I have problems to make the engines to run at the same time and to take all measures. The engines are connected to two RMS Technologies R356 controllers. The two controllers are then connected to a RS485 to USB converter card and this card is connected to one of the USB ports on the computer. Currently, I spend an array of orders to two loops each VISA containing read and written. I have attached the vi to watch. All the stuff in the code synchronization is because a new order cannot be sent to the controller until the engine is running the previous command. If orders are sent right after the other, the controller will not execute the first command and then return with an error.

  Does anyone have a suggestion as to what I'm doing wrong?

  Thanks in advance for any help.

  
  

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• How can I open multiple homepages in Firefox? I want that all my Firefox different email accounts open at the same time. I've recently updated to Win7 and now I have to close it and to open Firefox to access another e-mail account!

  I want home pages Firefox 3 separate and distinct for each of my 3 accounts to be open at the same time.

  Questions are usually followed by a question mark. My reply has answered your question.

  Firefox does not have an email, there is no "accounts of Firefox. If you access "electronic mail" with Firefox, you can use web mail. Some web mail services do not allow direct access, they want their users to access their mail from a "portal" or "Home" and will redirect any attempt to load a web site page "internal" return to home page.

  In measure 3 loading different web e-mail accounts at the same time, if they are in the same domain it does not work on Firefox without an addon of Firefox. http://Br.mozdev.org/Multifox/

  IOW, if these three E-mail accounts with Yahoo, without this add-on you would have to connect separately for each e-mail account, log out of the first before logging in the 2nd. Then disconnect the 2nd before logging in the 3rd. Firefox is not able to have several session cookies for a simultaneous connection to the same server. This add-on provides this feature of "multiple sessions cookies".

• How can I separate the dialogue of downloads and bookmarks in the library box so I can see each one separately and at the same time as Firefox used to allow?

  After the last update, placed Firefox download dialog box and bookmarks in the same dialog, which cannot see both at the same time. I can't find any option to separate the two. It's severely cramping my workflow. Can you tell me how I can see once more my download progress in a single window and my favorites in another?

  You can view the new download manager in a tab by opening the words: download page and you can consider opening this page in a separate window.

• where is "allow firefox developer edition and firefox to run at the same time"?

  just update to 41... and now I have cannr run this at the same (time

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

• How to open 2 separate Yahoo mail accounts at the same time? I can do this in Internet Explorer by clicking file | New Session. I don't see how to do this in Firefox.

  How to open 2 e-mail accounts Yahoo separate at the same time, without using an add-on or plug-in? I can do this in Internet Explorer by clicking file | New Session. I don't see how to do this in Firefox.

  You need two independent sets of cookies to achieve and that an extension can do this.

  • Multifox: http://br.mozdev.org/multifox/

  You can get a second series temporarily passing to private browsing mode and open the current session, but still allows you the same account only one way at the time and you have to identify you again after returning to the first account by stopping mode PB.

  • https://support.Mozilla.org/KB/private+browsing
  • https://wiki.Mozilla.org/Firefox3.1/PrivateBrowsing/SecurityReview#configuration
  • Browser.privatebrowsing.dont_prompt_on_enter
  • Browser.privatebrowsing.keep_current_session

• At the same time, both Firefox (with images, the other without)?

  Hello

  Is if possible to use two browsers firefox at the same time, one with active images, the other is disabled?

  Easy way on Windows: you'll need 1) the name of the second profile you have created, 2) a shortcut existing (already on the desktop, I hope) to Firefox.

  1. Create a copy of the shortcut, you can right-click on the shortcut and select send to > desktop. It will create a nice copy of second.
  2. Right-click on the copy and go to properties.
  3. In the 'Target' box, you should see something like "C:\Program Files (x86)\Firefox\firefox.exe" .
  4. After all (including the quotation marks) in the target box, add -no-remote -P <profile> where <profile> is the name of the profile that you created.
  5. For example, if the path to the firefox.exe am I guessed above, it would look like"C:\Program Files (x86)\Firefox\firefox.exe" -no-remote -P my-second-profile

  To run the second instance at the same time, simply use the new shortcut. The -no-remote flag tells him to start another process of Firefox, instead of simply to open a new window in the current.

  Never, ever run two separate processes with the same profile. This is the case, if evil.

• Cannot use the network after the first time backup volume machine

  Hello

  After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

  The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

  What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

  I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

  Any suggestions?

  Thanks in advance.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

  Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

  DELETE THE WORD 'Start' TO THE TEXT BOX

  so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  If all you see are messages that contain the word 'Start-up', you clear the text field.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Update graph XY measurement at the same time.

  Hello

  I want to update chart XY measurement at the same time.

  Normally, the graph is last updated after taking the reading.

  I tried to make a chart that is updated at the same time, but it's not seems a correct value.

  You please guide me.

  Thank you very much...

  Sorry, I can't know how many plots you have on the chart. Only one?

  Here is a small example showing the gradual construction of a xy chart. Maybe you can adapt it to your problem.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• How do I update Flash Player ActiveX & Plugin to an internal server at the same time?

  
  At work, we use both, Flash Player ActiveX and plugin, because of the use of different browsers. We have implemented a background update of our internal server.

  Updating via 'FlashPlayerUpdateService.exe', an extension of the ActiveX is updated and the Plugin is not.

  But if I do it in this order: update install ActiveX → update → install the update, the two Extensions → Plugin.

  Here is the mms.cfg:

  AutoUpdateDisable = 0

  SilentAutoUpdateEnable = 1

  SilentAutoUpdateServerDomain = [our server]

  SilentAutoUpdateVerboseLogging = 1

  Is it possible to update the two Extensions to an internal server at the same time?

  Hi Jak,

  The file currentmajor.xml is a relatively new, 2 versions there are, I think, but it seems to be missing in the file fp_background_update.cab of the release last month. The FlashPlayerUpdateService.exe for the 14.0.0.176 version is looking for this file, and not finding it, which explains why the Plugin is not updatable. Flash Player 15.0.0.152, we published yesterday and I confirmed that the file currentmajor.xml is in the new fp_background_update.cab package.  You can download the new package of the Adobe Flash Player Distribution fp_background_update.cab | Adobe page.  Once you deploy the new package on your server, the currentmajor.xml file must be in the directory of /sau, at the same level as 11, /14/ and 15 (new release of yesterday), and the Plugin should be updated after the ActiveX updates for the new version.

  --

  Maria

• How to make an update of location to a group of photos at the same time?

  How to make an update of location to a group of photos at the same time?  This used to be a feature in iPhoto.

  I use El Capitan 10.11.6 and Photos 1.5

  If yu have OS X 10.5.1 s you say that you can not - with OS X 10.11.6 Photos 1.5 (a free update in the app store) you select them and info - enter the location and it will apply to all photos

  LN

• Two different language versions of Firefox at the same time?

  I am running Windows 7 Home Premium. I have two accounts, one for me and one for my wife. She uses Firefox (Japanese), and I've been using another browser. But I would like to firstly using Firefox (in English).

  Is it possible to run two different language versions of Firefox on the same computer? I want to be able to run both at the same time... (So if I navigate and she wants to check an auction quickly it can without my duty close my browser).

  Can be done with relative ease?

  Make sure that each of you has their own Firefox profile folder.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• I have to be able to open many profiles at the same time. Chrome for this. Why not Firefox?

  I knew that there are years you may have multiple profiles in Firefox, and given that Chrome is really stuffy handling games like Farmville 2 lately (don't know why, but Firefox is the browser recommended Zynga anyway), I decided to set up the profiles of boards and profile shortcuts. But there is a BIG problem. With Chrome, when I put in place of shortcuts to profiles that Chrome allows you to do in a single click, by the way, if I have a profile already open, I can open windows in all separate profiles using their shortcuts. In Firefox, I can't. If I have an open profile, the other shortcuts simply open windows in the same already open profile. This is not acceptable. It's not as if profiles are in the same directory. They are in separate directories and that there should be no problem with the opening of two or more profiles at the same time.

  You can use the - No.-remote command line switch to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles