Air print with my HP 3520 printer?

Similar Questions

• 410 - XP Epson Expression host: connecting printer all-in-one iPad with Apple Air Print or cloud Air

  I tried to update my iPad Air to ios8 in order to use the Apple Air print, but get error msg when I try to install. Epson XP-10 is supposed to be compatible. I do not have a wi - Fi connection. What should I do to get my iPad & my printer talking to each other? I'm learning just this technology.

  Hello

  Sorry, I don't know the Epson products. But is NOT on the following list, therefore you cannot use AirPrint:

  http://support.Apple.com/kb/ht4356

  Kind regards.

• What is printer Apple App and Air printer is best

  What is best Mac Book Pro App and Air App with a value of $39.99 printer printer.

  you don't need an app (menu) file = > print in any application

• Air print vs. e-print

  I have and iPhone 4 and 6 - air print.  I have a HP Photosmart printer 7520 all-in-one.   e print

  When I try to print from iphone, error msg said no air printer.  I download the HP eprint app to each phone on each phone.  It is not a problem of conncectivity with the internet.   Using the hP eprint app that I put in the necessary to print news.  Prolem is air-printing.

  Hello

  They MUST be on the same net work. If this isn't the case, on the same network, you can send to printer, print or use Google Cloud print.

  Kind regards.

• HP laserjet pro M1536dnf wireless configuration in order to use Air printing

  Since I am trying to print from my new Ipad Air, excuse my newbie questions for networking printing!

  What I know so far:

  1. I understand my printer HP laserjet pro M1536dnf is 'not' a WiFi printer.

  2 by HP support and Apple Support web sites, my printer HP laserjet pro M1536dnf is 'Air Print' active. I guess that a certain update must incorporated the Betacam Air Print!

  3. According to the web site of the HP Support, I have currently the latest firmware installed (20130815).

  Note: On my Config report, it shows the status for IPv4 and IPv6 as "network cable unplugged". I have the address IP Show as active.

  3. my home configuration has the internet cable from my modem cable to my router wireless Linkys E3200 via a coaxial cable. Between my router and my computer is connected through the Ethernet cable. My printer HP Laserjet 1536dnf printer is connected to my computer via a USB cable.

  Issues related to the:

  1. go to after I saw and read about on-line, is correct to say "I'll have to change my Ethernet cable from the router to the computer and change it to leave the router to the Ethernet port on the printer?"

  2. do I have to remove the USB from the printer to the computer?

  3. by removing the USB cable between the printer and the computer, how my computer would communicate to the printer to perform a print job? Unless, I suppose, I add another Ethernet cable between the router and the ethernet port on my computer!

  4 other advice, I might have missed?

  @RicharddR

  Thanks for your post on the forums of hp.com. Here are answers to your specific questions:

  1. you must have all your devices on the same cable modem network: computer, printer, mobile devices. Looks like your Setup is similar to mine. I have mine with the modem installation cable to my Cisco router that broadcast wireless signal. Then I have my devices on this router (computer, printer, mobile devices).

  2. If you use Airprint, you put your printer on a network or wireless. Since your printer is a model of dnf (D - duplex, n = network, f = fax), you must use a network cable and add it to your router. AirPrint is not supported via the USB port.

  3. If you remove the USB cable between the printer and the computer, you need to add your computer to the same network as your added to the printer. You can either do this via the ethernet cable or wireless depending on the capacities of the router and the computer. The important thing is that all the devices are on the same network.

  4. for other tips: make sure everything (computer, printer, router, mobile devices, etc.) are on the same network, otherwise you will not be able to print or have communication problems such as print jobs do not print.

  Good luck.

• HP Officejet 6500 a: HP Officejet 6500 a and Air Print

  I use HP OfficeJet 6500 has connected to my network.  Works very well.  It is also implemented and works with ePrint via email address.

  Now, I'm trying to get my iPad and iPhone to print via Air Print, but they will not find the printer.  All products are up to date.

  (1) is the printer must be in wireless mode for direct connection to Apple products instead of via the router and not through the wired connection?

  (2) it seems that this 6500 a has any ability to woreless when I unplug the ethernet cable, even if the guide and the sites Internet says that she is supposed to have wireless capability.  No Option in the Network Setup menu to enable or disable wireless.

  Hello

  Must be connected to the same network, as long as it's the network of sae, an ethernet cable should work.

  AirPrint is based on good morning, requiring your router to support the transfer of Multicast packets in order to establish such a link.

  There are routers that does not support multicast or can with this support, disabled by default, the router is most likely the cause of forums,

  If please specify your router brand and model to better understand any possible cause.

  Shlomi

• Air printing works not recognized that phone I 5

  5-air photography through the lap top with original Lap Top Dell and an upgrade to 8.1, that I was able to print from my iphone.  Fast shipping, after having to replace the hard drive that came from Dell with 8.0 is provided under warranty I can't get air print to find the printer.  This feature is not available in 8.0 and 8.1 only.  I could miss something during the reinstallation, but the fact that everything worked with the original hard disk that has been upgraded to 8.1 tells me it is not a compatibility problem, but more for a setting I'm missing somewhere

  I can answer my own question now because I have installed 8.1 air printing works again.

• iPhone on air print work and no ipad

  iPhone on air print work and not the ipad?  any suggestion?

  You mentioned a device works and the other does not. The first thing you want to do is to determine what is different between the two devices. Both are on the same network with success? The other device has already worked, or have been updated recently performed at what caused this?

  To really help I would need details as what model of printer you have, what model of router you have, what version of iOS is installed on your device and what version of each device you have (iphone 4 or 5, ipad, ipad 2, etc.).

• HP Photosmart all-in-one 7520 showing Air Print Macbook Pro Maverick 10.9.4

  At one point, I don't have Air Print showing next to the printer in system preferences. Printer and scanner works well, but I was told by someone on this forum who Air Print should not see. How can I remove Air Print. I have a Macbook Pro Maverick 10.9.4. HP Scan version 4.1.1. I did an update earlier this year and the impression of Air was not there.  See Office for Mac not choose for the question. Thanks for your help.

  Hello Sunshyn. It worked, no Airprint shows. Thank you for your help.

• iPad2 air print can't find printer HP7500A

  My air iPad2 impression can't find the printer HP7500A.  Two iPad2 and printer on my wireless Netgear N750.  Web site HP7500A has identified that the 7500 a does support air print.  Turned on the printer and the router (On and Off), but still the iPad can not find the 7500 printer.  Search the web site, but helps to solve my problem.

  Thanks for all your suggestions.  Today, I took my iPad2 at the Apple store to check the latest version of the operating system software. Everything was up to date.  I checked the HP7500A touchscreen and selected the web option.  Wow, the printing software must be upgraded.  After the upgrade of the printer, the iPad2 did find the HP7500A under Air Print printer.  Everything works.

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Air iPad with iOS 9.2.1 in 'Settings' under the Safari icon HomeKit icon does not exist (and is not possible to configure HomeKit)

  Hello:

  I have iOS 3 devices: iPhone 6, iPhone 5, iPad Air all with the latest iOS 9.2.1.

  I bought a Netatmo Thermostat, with the HomeKit technology.

  In the iPhone 6 there in 'Settings' under the Safari icon HomeKit (configure) icon.  BUT in the iPhone 5 and iPad Air does not exist the HomeKit icon (and it is impossible to configure HomeKit and link the Thermostat).

  Tank you for help me!

  In the article below, it seems confugure Homekit first by downloading the app from the manufacturer.

  Use the HomeKit accessories compatible with your iPhone, iPad and iPod touch - Apple Support

• I am one of my apps Android AIR of CS5.5 to animate the portage. I can't download on devices running < 4 Android. The problem seems to be that the default Android SDK of AIR conditioning with Animate is version 20, but < 4 Android devices seems to b

  I am one of my apps Android AIR of CS5.5 to animate the portage.

  I can't download it to devices that run Android 2.3.x versions. The problem seems to be that by default what android SDK of AIR conditioning with Animate is version 20, but the devices running Android 2.3.x seem to be stuck on the AIR 19 runtime. I downloaded Android SDK of AIR 19, but when I tried to switch to it using 'manage AIR SDK... "I get an error message saying that I can't upgrade to a version of AIR lower than the preinstalled version. Still, I have many users using devices that run Android < 4 versions and won't leave stranded. What can I do to fix this?

  Yet can the old way to overlay a term I used in CS5.5, be used? I never tried to superimpose an OLDER version of the SDK on CS5.5, then perhaps it would not have worked either.

  In the part of the descriptor XML app Android, you can set the minimum level of SDK, like this:

  This has been very convenient for the times where I wanted to make sure someone is on Android 4.0 or later. But it may be worth trying as a way to override the default used by AIR. You can try to use the 9 or 10, depending on whether you think that your users would have at least to 2.3.4.

  Or, do not worry them, they always take advantage of your old version.

• Using invocation of AIR Navigator with AIR apps that have the runtime integrated

  Adobe AIR * AIR. SWF in the browser API

  After you have found the above article which sets out how to launch an AIR application from the browser I tried to create some test files.

  When you publish an AIR using activities15 desktop application and setting the goal as 'Application with the embedded runtime' publication fails with the error "116. Invocation of the browser is not supported with this lens.

  The documentation mentions nothing about applications with Embedded runtime and I assume that it was written before incorporation was possible.

  Could someone please confirm that this is indeed the case. That you are unable to launch an AIR application with the runtime shipped from the browser?

  Thank you very much

  Mark

  Your assumptions seem to be correct... runtume in captivity does not support invocation browser out of the box, probably because it would be generally part of the installer. If you take a look at this page, it suggests ways to implement your own URI handlers for the registry of Windows and OSX:

  Adobe AIR * package bundle captivates runtime for desktop

• AIR Android with DRM Flash access 3 (workflow DRM client-side)? Help

  Hello

  I'm trying to manage DRM encryption for video with Flash Access 3.0 on Air for Android (or the profile of the mobile device). I looked around and found no far no awnser.

  I know that Flash Player on Android devices is not supported by Adobe Flash Access, but it looks a little different on AIR Android app, but where there is a moment that I don't understand and I can't find any answer or examples.

  How to manage the workflow DRM API for AIR Android with frame AIR?

  So far, I've done a video playback custom AS3 (such as StobeMediaPlayback), and I'm playing:

  1. (encrypted) encrypted-> http://drmtest.adobe.com/content/anonymous.f4v video and its metadata http://drmtest.adobe.com/content/anonymous.f4v.metadata
  2. and not a video encrypted-> http://drmtest2.adobe.com:8080/Content/unencrypted.f4v on an Android device with AIR frame.

  What I understand according to what I found this, this forum, there are a few different workfows to manage DRM:

  #1-FMRMS (Flash Media Rights Management Server) before Flash Access:

  -NetStream.play()

  -NetStream.Authenticate)

  Adobe said tha the workflow that the above is no longer recomanded, as we now have Flash Access

  #2-accès flash (Flash Player or AIR Desktop):

  (without the authentication token) anonymous	(with the authentication token)
  1. get drm metadata 2. organize DRMContentData class metadata drm 3 DRMManager.loadVoucher) 4 NetStream.play()	1. get drm metadata 2. organize DRMContentData class metadata drm 3. identify metadata this video requires authentication 4. prompt the user for information for identification and call DRMManager.authenticate) 5 DRMManager.loadVoucher) 6 NetStream.play()

  more information: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7ce3.html

  Both use the DRMManager class in which you can use loadVoucher to apply the GPO, of the DRMContentData for a multimedia file protected by DRM

  #3-flash Access 3.0 (mobile AIR 3.2):

  But in AIR environment for mobile device, I can't find information to a workflow for DRM Flash Access. The official documentation say that the DRMManager class 'it is not supported on mobile devices. You can test the support at run time by using the DRMManager.isSupported property"(source: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/drm/DRMManage http://Hotfile.com/dl/714028/a47ed1a/the.Lord.of.the.rings.Conquest.Razor1911.part01.RA ). For now, when I test my drive DRMManager.isSupported, the back is 'false'.

  Is there a way to manage a DRM for AIR mobile player without DRMManager class? What is the good workfow for this? Or maybe, I confused with something. I think some people have managed with DRM on mobile AIR implemtnation...

  Thanks in advance

  ethiers

  (Sorry for the English and I am starting with the implementation of DRM, I've never done this before)

  ----------------

  Here are a few close related thread about my question

  Public Flash Access DRM examples? (Sample content) - http://forums.Adobe.com/thread/723499

  DRM video playback - HELP Please- http://forums.Adobe.com/message/2962340

  Part unencrypted to encrypted - content http://forums.Adobe.com/message/3643812#3643812

  Accident of Adobe DRM-Activatie android - http://forums.Adobe.com/thread/779962

  Content Flash access DRM not no projection in Android mobile - http://forums.Adobe.com/thread/841990

  NetStream in the AIR - http://forums.Adobe.com/message/3705234#3705234

  4.0 + AIR 3.2 Android (HTC sense) has the support of that:

  trace (DRMManager.isSupported, DRMManager.getDRMManager ());

  Returns

  true [DRMManager object]

  2.3.4 Android + AIR 3.2 (Samsung Galaxy S II) returns the same result.

  In our lab, we also have other devices - if you are interested in particular devices we have a test. In fact, we did several projects with mobile Androids - FAXES DRM worked there.

  Thank you

  Denis.

  Web multimedia Blog