Alerts are have passed to the third-party tool with a some minutes along 2 late

Similar Questions

• Would it not safe to export reg to the third party?

  Would it not safe suite export reg to third party for investigation?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\enum\Root
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
  HKEY_LOCAL_MACHINE\SOFTWARE
  HKEY_CURRENT_USER\Software

  Hello

  By exporting the following registry locations you give information below to the third party for investigation.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\enum\Root stores your computer hardware information.
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services stores the information on your network
  HKEY_LOCAL_MACHINE\Software, contains information of all the applications installed on your computer.
  HKEY_CURRENT_USER\Software, contains the information of the applications that are used by the user who is currently logged on.

  It is up to your discretion whether to provide the information or not.

• The integration with third-party tools

  Hi all

  I have a question. I am to enter my vFoglight alerts in a third-party tool. My foglight server is a windows box, so I am using windows scripting and I installed the last integration Foglight cartridge. I'm trying to get Foglight to send alerts to an IBM Tivoli TEC server for processing. Once I get the alert it. It can follow the process "Event Management" organizations. I went through the PDF integration and follow-up instructions 3 x. I get the error message below.

  Any thoughts? I don't know I'm missing something. I'm sure someone has done this before integration. That is why the cartridge being created. I'm sure I'm missing something and do not know what. This happerns to error when I try to save and complete the rule.

  

  What did you put in the State?

  In a similar integration (HPOV), I put the true condition

  

  The exception you get is condition being empty, if you set it to true, it fires when the event (alarm) arrives.

  Golan

• Is it possible to invoke the third party application every time that the user receives an incoming call

  Hello

  I have some doubts in regard to invoking an application third, whenever there is an incoming call (by observing the change in status of the phone). The third-party application must be called as soon as the user gets the call and must replace the appication of dial phone by default/native.

  Please suggest me some ideas if the above can be implemented or not. If it can be put in place what is possible?

  Also suggest me if there is another way to achieve this.

  Thanks in advance,

  Arun

  Got the solution after enough research:

  In Blackberry the substitution of native applications in is not possible. When there is a call that is a priority interruption that all applications are moved to the bottom and the phone call will be prioritized. When an incoming call is there is not possible to invoke the third about, we can take control as soon as the call is completed.

• Is it possible to use WCM open to the third-party application J2EE jsp tags?

  Hi all
  
  Is it possible to use tags jsp WCM opened in the third-party J2EE applications that are deployeed on websphere or tomcat? I have a client who want features WCM port such as onlin edition on their application WAS? Any suggestions? Thank you very much.
  
  
  Kind regards
  Joe

  Hello

  You can use the WCM_PLACEHOLDER function to display the content of the definition of the region and the data file on any 3rd party portal.

  To call the contributor of the 3rd party portal you can use WCM_BEGIN_EDIT_SESSION service.

  These services work for SS - Designer based on sites and site elements.

  Thank you
  Srinath

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• Third-party tool to draw the rectangle on the block diagram

  I know he was once a third party tool that allowed me to draw a rectangle of Nice double border on the block diagram.  Yes, it's the not the front panel block diagram.  It was very useful to make annotations and designating functional groups.  Does anyone know what this could be?  I installed Package VI Manager and went through everything I can think of without finding her.

  Unfortunately, the documentation for those modules potentially very useful is poor.  The 'Get info' is terse point of unnecessary and by clicking on "Product Home Page" rarely gets you more than a logo, not informative.  Surely there should be more details somewhere.

  I don't know what you're referring to the tool. What is this logo? Maybe someone can recognize.

  What is the problem with the flat frame?

• Disable the menu item in the third party application (such as Photoshop)

  Please suggest me to disable the menu item in the third party application (such as Photoshop).

  Hello

  I suggest you to send your query to the following link:

  Photoshop Help Center: http://www.adobe.com/support/photoshop/

  Hope this information is useful.

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Integration of active-to-end monitoring third-party tools such as HP QuickTest Pro, Rational Robot etc.

  One of our clients asked us to help. That is why I ask, whether or not it is possible to integrate the "timers" and "alerts" third-party active-to-end tracking tools, such as HP QuickTest Pro, Rational Robot etc. in Foglight (FTR)?

  Hi Claudia.

  If one of these tools can be user of a web browser, you could write scripts FTR against them just as you would for any other browser based application. If they have their own clients, you might consider using SDH advanced to build synthetic transactions that measure the performance of these tools and the activity they provide for you.

  Foglight FTR relies on its own generated scripts, so I don't think there is a way to integrate these tools directly at this level. However if these third-party tools have command-line access, or they write results for log files, you can use script Foglight agents to get the data.

  I hope this helps.

  Robert

• How to protect yourself on: configuration values change by third-party tools?

  Many installers for third-party tools change firefox settings.

  Things like addons, start pages, new pages tabs, search enignes of firefox are changed without me having a chance to stop them. Why? What can I do? Trustwhorthy the tools (or at least the tools that were worthy of confidence a year ago) to do this.

  Thanks in advance for your help

  Bookmark addon Search reset, you can use it to set Firefox default search parameters to their values if anything spoil them

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  I say favourite because it install reset settings and to uninstall.

  As FredMcD ays save things manually or using an addon or utility. Save your profile or at least the prefs.js file. Or be even more proactive create and backup your own user.js file prefs important that be messed with in there.

  You could go even further and lock prefs with a .cfg file, but aimed more generally deployments companies often using the addon of cck

  See also

  • Backup and restore Firefox profiles information
  • http://KB.mozillazine.org/user.js_file
  • http://KB.mozillazine.org/prefs.js_file
  • http://KB.mozillazine.org/Locking_preferences
  • http://KB.mozillazine.org/Locking_preferences
  • https://addons.Mozilla.org/firefox/addon/CCK
    • http://Mike.kaply.com/2013/07/16/CCK-Wizard-1-4-Finally-available/

  Note This is straying away from the advice we normally cover on this forum. If you need detailed advice and discussion you would probably better start or join one thread somewhere else like mozillazine if you do not start a thread discussion feel free to post here with a link so that others can follow your progress.

• Will you be able to dissconect from third-party sites with download of "add-on"?

  I like the idea. Is their a way to delete the third-party connections after their identification? For example, third-party cookies. As soon as I know that the site has a third party, can I delete the primary cookie and the cookie party or they are hidden?

  Hello aden0102, lightbeam is above all an educational tool to view the amount of common and content of third party trackers. the only option to improve actively your privacy within the extension is to block the browser to make connections to the monitoring servers you can set...

  https://www.Mozilla.org/LightBeam/

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Apple G3 TV - I have to re - authorize third party applications regularly

  I have several Apple TV G3 with Time Warner Cable in New York.  Applications of third party seems to lose the authorization for my TWC on a regular basis - every 2 to 3 months.  Given that this is happening on several Apple TV I thought it is a question of TWC, but their support said that hey can not help.  I can't find much info with web search on that, but what I found suggested it could happen every time Apple (or provider) updates the applications.  Any help on this would be appreciated.  Thank you!!

  Don't worry about updates; the last one for ATV 3 was safety only in February. The 'apps' on ATV 3 are integrated into the system and can not be updated by the providers. Users have more and more require repeated authorisation. It seems that the content providers or cable companies require that you reconfirm your right of access to these resources.