All their code must have a clip playing in reverse? And...

Similar Questions

• You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  I dug around and found that imovie 9 will do, not elegant, but looks like it will work for this experience.1

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• Video clips play in reverse in AS 3.0

  Hey all. I change all my files in AS 3.0 because of a few new elements, I would like to use in flash CS4.
  Here: http://www.iaw-atlanta.com/IvyLeague1-13-09.html I have the bottom navigation menu with 4 buttons. When the buttons are speckled on they go up and when they are mottled the film plays in reverse so they go down. Essentially in the clip, I stopped him, and the next frame gotoAndStop when the button is wriggle on and then have a script of saying things reverse when wriggle on. I know how to do this in AS 2.0, but how can I translate the script to 3.0?

  DjPhantasy5,

  > Ok thanks, I'll see what he also has to say as well.

  In fact, NedWebs pretty much nailed. :) The approach you have taken
  is an interesting question, because it evolves all the way back to Flash Player 5.
  has not yet supported the MovieClip.onEnterFrame event. Without
  event, you need something like your "controller" - a separate symbol
  a loop of timeline - to run the code that depends on the loops of the frame.

  Available from Flash Player 6, this event allows you to
  consolidate your code a bit by putting everything in a unique setting and avoiding
  the additional movie clip symbol. This does not mean that your approach is wrong, by
  any stretching. In fact, it's good to know your options, because if you always
  need to publish for Flash Player 5, you had probably better to use the installation program
  you took.

  I'll demonstrate onEnterFrame in just a bit, in case you want to take a
  Watch this.

  > There is no mention of _root in AS3, but you can use a
  > MovieClip (this.parent) (which replaces what _parent)
  (> used to do) to find something outside the immediate
  > movieclip.

  The term "parent" in this context, is technically a property of the
  The class MovieClip, which means all the clips in AS3 have access to the
  feature 'parent', which points to the timeline that contains the video
  in question. Buttons have also a property 'parent '. In AS2,
  property has done exactly the same thing, only it was preceded by an underscore.

  In fact, the proposed codification of the NedWebs works the same in your existin file.
  Instead:

  Your existing code...
  If {(_root.animation._currentframe>1)}
  _root. Animation.prevFrame ();
  this.gotoAndPlay (2)
  }

  If (_root.animation._currentframe<=1)>
  this.gotoAndStop (1);
  }

  ... you can use this:

  Alternative code...
  If {(_parent.animation._currentframe>1)}
  _parent. Animation.prevFrame ();
  gotoAndPlay (2)
  }

  If (_parent.animation._currentframe<=1)>
  gotoAndStop (1);
  }

  ... because this range - in other words, from this point of view - this
  MovieClip._parent property points to the same scenario as _root done.
  That changes, of course, based on how deeply nested the current scope are.
  The word 'this' in the code above is optional, because Flash understand
  What place you are in. From the point of view of the present code, _parent is
  interpreted as referring to chronology parent of the current, just as scope
  gotoAndPlay() is interpreted to the timeline of the current scope.
  You might precede either of those of 'this' or not.

  Many people will say that _root is probably best to avoid, only because
  It's a slippery slope. It does not always refer to the main timeline you
  think he does, according to whether or not your file SWF is loaded in another
  SWF when running. Meanwhile, _parent * always * refers to the immediately
  relative chronology.

  Then, when you look at this way, this perfectly valid AS2:

  If {(_parent.animation._currentframe>1)}

  ... is not very different at all from its counterpart of the AS3:

  If (MovieClip (parent).animation.currentFrame > 1) {}

  It would be nicer if you need convert the parent as a reference
  Movie clip here, but if you haven't, AS3 do not realize that the scope in
  This is a clip.

  > You can string them along like...
  > MovieClip (this.parent.parent)

  Exactly.

  > Your _currentframe in becomes the controller
  > currentFrame. That's all. The rest of what I have
  > saw will fly as is.

  Not quite. AS3 does not support on() or onClipEvent(), functions
  you will not be able to reach your management code for the button. Instead,.
  you will have to put in a keyframe - you can also do with AS2. There
  a good idea, anyway, because it allows to put all your code in a
  place, making it easier to find.

  Here's a quick word on the direct attachment:

  http://www.quip.net/blog/2006/Flash/museum-pieces-on-and-onClipEvent

  To convert your existing AS3 FLA structure, you could, for example.
  follow these steps:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (2);
  };
  function overHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (4);
  };

  That supports the code on (rollout) and executed in your current
  Version. The first line (buttonMode) is necessary because I got rid of
  the symbol button and, instead, handlers directly associated with
  your movie clip. (Video clips manage events of type button, too, if you)
  do not need the button.) In AS3, event handling is very simple:
  you are referencing the object (here, animation), invoke its hereditary
  addEventListener() method, then passes two parameters: a) the event to
  Listening and (b) the function to execute when the event occurs.

  You can see that noted above. In AS2, there are several ways
  to handle events, including one () /onClipEvent (), so it is harder to know when
  to use what approach. For the buttons and video clips, the principle works the
  same I just showed, but the syntax is different.

  Let's take a look to reduce all this code using the
  onEnterFrame event. First of all, check out this AS2 version:

  animation.onRollOut = outHandler;
  animation.onRollOver = overHandler;

  function outHandler (): Void {}
  this.onEnterFrame = reversePlay;
  };
  function overHandler (): Void {}
  this.onEnterFrame = null;
  This.Play ();
  };
  function reversePlay (): Void {}
  this.prevFrame ();
  };

  This code would appear in box 1. You don't need the controller
  video clip. The movie clip contains more an orb button, because
  We use the animation itself as the 'button '. (You can still see what)
  a feature that any object is looking toward the top of its class. If you are dealing
  with a clip, see the MovieClip class. See the position properties
  to find out what features of the object, see methods to know
  what the object can do and see events to find out what the object can respond
  (to).

  In the code above, it is prepared quite easily. It is AS2,
  don't forget. We have two events, we are listening to: MovieClip.onRollOut and
  MovieClip.onRollOver. these events are set up for the animated film
  clip using the name of the instance and associated to custom match
  functions. The outHandler() function associates a different function to the
  MovieClip.onEnterFrame event of the animation clip. Very simply, it
  load of animation to make the custom function reversePlay() whenever
  He meets an onEnterFrame event. The overHandler() function that kills the
  Association of suppression outside and saying animation to play, via the
  MovieClip.play () method. Finally, the reversePlay() function simply calls
  MovieClip.prevFrame () on the movie clip.

  Here's the AS3 version:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  animation.addEventListener (Event.ENTER_FRAME, reversePlay);
  };
  function overHandler(evt:MouseEvent):void {}
  animation.removeEventListener (Event.ENTER_FRAME, reversePlay);
  Animation.Play ();
  };
  function reversePlay(evt:Event):void {}
  evt.target.prevFrame ();
  };

  It seems wordier, but if you look closely, you will see that there
  essentially the same thing. The main difference is the scope of operation in
  AS3. In AS2, there are many references to "it", because the event
  Manager operating in the same scope as the object to which the
  Association is formed. In AS3, the references are not to "that", but rather to
  the same movie clip by his * name *, because in AS3, the scope
  works in the same scenario in which the code is displayed (IE, in this)
  case, the main timeline).

  In the function reversePlay(), in order to emulate a 'this' kind of
  the installer, I refer to the parameter that is passed to the event handler all the
  functions in AS3. I happened to name "TTE" (for the event), but you can call
  it what you like. In the case of reversePlay(), the evt parameter refers to
  an instance of the event class, which has a property to target. The target
  property refers to the object that sent the event - is be
  animation, in this case. Then evt.target, in this context, refers to
  animation, that's what I call the MovieClip.prevFrame () method on.

  I downloaded some FLA files to my server. I keep them
  it for always... maybe a few weeks, from this post:

  http://www.quip.NET/RewindTestAS3.fla
  http://www.quip.NET/RewindTestAS3_new.fla
  http://www.quip.NET/RewindTestAS2_new.fla

  David Stiller
  Co-author, ActionScript 3.0 quick reference Guide
  http://tinyurl.com/2s28a5
  "Luck is the residue of good design."

• When you play online... have noticed that playing becomes slower and slower. Screen sometimes until gels... what I can do to fix this.

  have problems with Farmtown, some games on MSN, some downloaded games... of these response time is slower and slower, sometimes the screen... freezes especially on FarmTown. Any ideas?

  Hello smke0298, welcome.

  1. what browser do you use? Internet Explorer?
  2. the same performance issues occur on all computers in your area?

  ----

  You can try this:

  1. download the latest version of Adobe Flash player here:
  http://get.Adobe.com/flashplayer/

  2. put your computer in a clean boot:

  a. Click START, and then click on 'run '.
  b. Type "msconfig" (without the quotes) and press enter
  c. click on the "Startup" tab and uncheck all the entries displayed
  d. click on 'Apply' at the bottom right
  e. restart your computer

  3. restart your computer and see if the problems have disappeared

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a plan and want to cancel, but not sure what Adobe ID is under. I must have signed with a different ID, and now I don't remember what it is. How can I reset or find my ID? Cannot find reset password.

  I forgot my ID Adobe, what should I do? can find only reset password

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Some, but not all web sites display incorrectly. I played with NoSquint and layout.css.devPixelsPerPx. for 45 minutes without reasonable result.

  Windows 7.
  There are open spaces on some websites and not others.

  In addition, last several months after a Web site is displayed correctly (scaling, images, text), the text became and remained unclear.

  I probably won't be able to fix it myself. \

  Thank you.

  Allan Duby

  OK, this is not a direct result of different scaling of defaults in firefox 22...

  can you try to clear the cache and cookies from flickr and reload the page or otherwise see if she does not work correctly when you start firefox in safe mode, once?

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  See also the Web sites look bad or display differently they should

• Can I get a professional XP disk and install the OS individually on each computer (they have all their key codes), or do I have to find another way?

  I bought a bunch of desktop computers that came with XP Professional with IBM. I ordered the reinstallation disc, but it worked on one of my computers. Can I get a professional XP disk and install the OS on each individually (they have all their key codes), or do I have to find another way? I don't have the money to buy the recovery for each computer disk.
  IBM ThinkCentre

  Pentium 4 3.0ghz

  512 MB of ram

  hard drive 40 GB

  XP Professional

  As long as the disc you are using is the exact same OEM disc that would be provided by IBM that would work on these computers. It cannot be a copy in the Windows retail.

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, hasta the vista.

  Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, effyou, hasta the vista.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• •To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  You need a DVD decoder.  Maybe VLC media player will work.  If this isn't the case, you will need to buy a program to read these files (or DVD) on your computer.

• I get an error COOD11B1 code when you try to play a video clip. __

  I get a COOD11B error code when I try to play a video clip.

  Hi Pat dubois,

  1. what type of video file that you are trying to play?

  If you receive error C00D11B1 code,

  Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.

  Also take ownership of the files you are trying to play by right clicking on the file and taking possession.

  B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.

  Codecs, frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• 10 blackBerry smartphones must have application for all BlackBerry...

  Please add list: 10 must have application for all BlackBerry phones + link to application...

  And can someone give list for BlackBerry 8100? I am new user of BB...

  Recommended freeware.

  ------------

  Nettwerk

  Stinsonddog Web site

  http://www.Stinsonddog.com/must-have-applications

• have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Also in first CC transitions they are like those on Adobe Premiere CS6 as much as

  have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Transitions in first CC are also like those on Adobe Premiere CS6 can get 1 transition and then take multiple options as only a transitional option when I take the transmission of action... for example break glass I can also do several different transitions with in the glass break action transition

  Hi Willkutlass,

  I'm sorry but don't know what 'pat film' is. If it is a 3rd party effect/transition, you may have to pay for it.

  And the video transitions in Premiere Pro CS6 and first Pro CC are the same.

  Only difference, several transitions in CS6.

  

  Answer please, if you would like more information.

  Thank you

  Ilyes Singh