allow the user to take notes and record

Similar Questions

• Allow the user to take exams only once?

  Is it possible to allow a user to take only a review once?

  I have 4 exams, and they are all separate captivate files (IE: exam 1 exam 2, exam 3, 4 review), they are in no way bound together, but is it possible to see if a user has taken 1 exam, and then forbid them to once again?

  Thank you

  To remove this you will need to store variable data outside the Captivate module that records if the user has attempted a given questionnaire.

  Captivate standard does not currently provide a way to write persistent data out of the module of Captivate.  But fortunately there are now widgets that CAN do.

  Find out here: http://www.cpguru.com/2011/10/04/save-and-load-data-widgets-for-adobe-captivate-updated/

  With the widget to save the data, you can write data to a variable from shared object on PC of the user who registers the fact that they tried a quiz, and what mark, success or failure etc.

  Then on the same or subsequent modules, you can insert the other gadget to load data to read the stored variables and use advanced Actions to decide what to do.

  For example, considering the widget Load Data that the user has already tried the test of the current module, it could immediately jump to a slide that informs them of the the fact that they have exhausted their allocated tries and will not be able to do the test again.

  You will need to think through all possible means, that a user might try to thwart your attempts to lock them.  For example they bypass the warning and even the chance to quiz via the navigation bar or OCD.

  But you can see how widgets make this possible solution?

• How can I allow the user to take a quiz in the middle of it in Captivate 7?

  Hello Captivaters,

  I want to the learner of a test until he could continue on the training of the force.  If it does not pass the test, he will have to go back and resume. "Recovery" button allows him to do this, but I really want to have 4-5 of these checkpoints 'quiz' in e-Learning - separated with presentation material - so the user proves that he understands the material before moving forward.

  This is why I would create my own button "recovery" at the end of every "checkpoint quiz" that leads the learner to the first issue of this checkpoint (not to the first issue of training).  So far, I was able to create a button that appears after it receives a correct quantity to allow him to continue, and I want to create a button that appears and brings it to the first control point question if is nott get the correct amount and return to these questions.  The first part is easy, but I also need to add the function or reassign a variable to allow the user to resume the quiz. I hope I'm making sense... Any help would be appreciated!

  -Ryan

  Your recovery button (s) will have an advanced standard action at least these two statements and in the following order:

  • Go to slide to score
  • Go to the question slide

  Jumping to the slide of score and so that there are attempts to Quiz on the left, the next attempt will be launched (you can check if you put the system variable I was talking in a text container timed for the rest of the project). Then you jump to the slide where you want the user to return to the questions.

  You may have to make it a conditional action advanced, if you want to first test the result?

  Lieve

• iPhone 6 s - photo app does not allow users to take pictures and listen to music at the same time

  The repro steps:

  • iPhone 6 s - photo app does not allow the user to take pictures and listen to music at the same time

    Music app vs photo app

  (1) play a sound track in the music app
  (2) the swtich to app photo (on the "Photo" mode)
  (3) music stops

  Pandora app vs photo app

  1) turn on pandora
  2) switch to the camera on the 6s iphone app
  (3) stopping the music

  PLEASE FIX AS SOON AS POSSIBLE *.

  My iPhone stopped playing music when you take photos?

  Nothing to trouble since he was not taken in charge.

• Upgrade to Acrobat Pro XI / Adobe Reader XI and allowing the user's rights

  My business is a bit backwards on the software updates and I will ask for Adobe Reader XI thrust out company-wide since then allows the user to save a completed PDF form.

  Right now I use Acrobat X Pro and suspect I will need to upgrade as well.

  My questions are:

  • With the newfound ability of the reader to finally be able to record a filled in form, how this effect the scenario of "enable user rights"?
    Is it necessary if the entire company uses Adobe Reader XI?

  I did a test in Adobe Reader XI, and of course, I was able to save a completed form... BUT I couldn't not digitally sign the form.

  • Where is the activation rights is always required?
  • Or is it because the form has been designed in Acrobat Pro X?
  • Acrobat Pro XI work around that?
  • I know I don't no need to upgrade to Acrobat Pro XI to continue to make shapes, but should I?

  Thanks for your feed back, and I look forward to reading your responses

  Yes, in order to activate the reader digitally sign, you should always activate with Acrobat Pro or LiveCycle Reader Extensions.

  Acrobat 11 has a number of improvements related to the forms of creation. Two of the largest partners about how configure the tab order of fields are worth the cost to upgrade. You can now select several fields during the reorganization and turn off the auto arrange making Acrobat.

• copy the select value in the textfield of LOV, and allow the user to modify

  Hello
  I have a datablock with 20 records and each record has a comment (say field_comments) fields. I would like to allow the user to choose LOV populated predefined comments (say lov_comments) and add a few additional comments after they choose the value of LOV.
  
  I created a LOV and added the return type 'field_comments' in column mapping properties. When the user clicks a button, LOV opens. They choose the value of the LOV and the value goes to the field 'field_comment '. The problem with this approach, the user cannot add their comments after selecting in LOV.
  
  I tried this too much. I created another area of non-visible text (i.e. fake). In the LOV, I added "dummy" field as returntype. In the dummy field, I created the trigger 'After the CHANGE', which basically says: block. field_comments =: block. Mannequin.
  
  But, the user must click another field to display the value selected from the LOV. The values of the 'field_comments' is not being updated as soon as the user click on the 'OK' button in the LOV.
  
  I'd appreciate if someone could give me feedback and help to solve my problem. Thank you for your help.
  
  I thank.

  Well, I tried exactly what you posted and it allowed me to SELECT from LOV, then CHANGE/ADD new text in front of returned value in the field. He recorded in the database and questioned without any problem.

  Your article is allowed to INSERT/update? If this isn't the case, then set yes "Update/Insert allowed" and attach your LOV to the element and set "post to list" No.

  You can also see if you have any validation done on WHEN-VALIDATE-ITEM trigger or after CHANGE which will fail because you change LOV populated values.

  I hope that helps!

• I did a xp pro login password, which was 12 letters long but the connection only takes 11 and will not let me

  I did a xp pro login password, which was 12 letters long but the connection only takes 11 and won't let me help please

  * original title - administrator password *.

  Hello

  Only 11 characters appear on the screen of Windows XP connection at a time, but if the user holds just type the characters will continue to be entered. Please, continue to type the complete password and verify if you are able to connect.

  I tested just a password 21 characters who allowed me to log in and out without a problem.

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• Do not allow the user to enter characters undetermined

  Hello

  For some reason some have used it the FIELD of TEXT object for the field of digital data entry.

  In fact, the user must always enter numeric data.

  No decimals, no comma, no alphabetical characters allowed except numbers.

  (Syststem should not allow the user to enter data not allowed at all... I mean, when to reach us using digital / object field... or if user trying to enter data not allowed I HT to raise an error and CLEAR the field immediately)

  Pls I want to know how to get my requirement? Do I need to use JavaScript or model or Validation Object palette model or all 3?

  I am newbie, pls give me the code (such as JavaScript)

  Thank you

  You can use a small script with a regular expression in the event of change of textfield yout, to check the input current and delete everyting that is not a digit.

  If (! xfa.event.change.match(/\d/)) {}

  XFA. Event.change = "";

  }

• My request is not getting screolled or slide down. Please keep scrollview so that the user can scroll upwards and downwards and view the content.

  My request is not getting screolled or slide down. Please keep scrollview so that the user can scroll upwards and downwards and view the content

  Here is my code that need to be kept scrollview

  
  http://schemas.android.com/apk/res/android"
      android:layout_width="match_parent"
      android:layout_height="match_parent" >
  
      
  
          
  
              
  
              
              
  
              
  
                  
  
                      
  
                      
                  
  
                  
  
                      
  
                      
                      
                  
  
                  
  
              
  
              
  
                  
              
          
      
  
  
  

  I just need the view scrollbar or scroll with which users users can scroll vertically in the App and can see full

  content of the app.

  Solved

• How can I allow the user to enter the 5 digits in an inputText and who must be a number.

  Hi Experts,

  JDev 12.1.3.0.

  How to allow the user to enter only 5 digits for an inputText and there should also be a number?

  Thank you

  AR

  Try with:pattern="[0-9]{1,5}"

  Dario

• Allow the user to update the fields between some time. If not just to see

  Hi Experts,
  
  I was thinking about the following example. Can I know how can I implement this in project web ADF.
  
  Allow the user to change the shape of the page on some time interval of time rest allows them to view only. I can put this check in time of connection or the loading of the page. How ever how to apply this connection between the cut-off time. Can I disconnect all users of the system to time limits and ask them to re-login again. In the affirmative. How to implement that.
  
  Thank you.
  
  t

  A brainstorm of my response, possibly other posters will give a better answer...

  Is the requirement actively disconnect everyone once the time-out occurs, or can at least delay to the next request for each client?

  If the old I suggest to use some sort of component Ajax poll on the page that keeps checking with the server if the delay has occurred. Maybe later if a Java EE filter or listener to detect the expiration time. In both cases once the delay has occurred to redirect the user to the adfAuthentication servlet will disconnect the current session/user.

  CM.

• How to allow the user to filter the report data?

  I read a lot of entries on this topic related to interactive reports. From what I can tell, the version we are on... 3.0.1.00.08, does not have the 'classic' vs 'interactive '. So, can someone recommend the best way for me to allow the user to filter report results? Specifically, the user wants to be able to see only active records, but I also want that they want to see all documents (active and inactive).
  
  Thank you
  Kristina

  Kristina,

  You can add a list "select" to your page. Calling it something like P1_LIST and add it to your where clause as...

  select
  col1,
  col2,
  col3
  from table
  where col2 = decode (:P1_LIST, '-1', col2, :P1_LIST)
  

  You can set the LOV to auto-submit or have a 'Send' button so that your report is filtered according to the value of P1_LIST.

  Also, in the properties of your selection list, set the 'Null view' to 'Yes', 'Display Null value' to something like 'ALL' (or whatever text you want) and the "Null return value'-1 (or whatever value you have in decoding).

  I hope this helps.

  -Chris

• INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

  I want to allow the user to specify a curve like this:

  

  Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

  My design looks like this:

  

  With the error checking that looks like this:

  My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

  I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

  If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

  Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

  Spend more time thinking before coding usually pays Big dividends!

  (Speaking of sad experience) Bob Schor

• Password for the user: ASADMIN is not configured error clicking on the deployed webservice

  Hello

  By clicking on the deployed webservice, getting the error below.

  Password for the user: ASADMIN is not configured.

  As mentioned in the doc https://support.oracle.com/rs?type=doc & id = 1311068.1 followed the steps.

  After recording there is a warning stating"

  "Role data updates will be not visible in the application until the following processes are started: Workflow background engine.

  Then I restarted the Workflow Agent listening Service. But when I integrated soa gateway connection again I get the same error as "password for the user: ASADMIN is not configured.

  Can someone help me with the problem?

  BR

  Magali

  When you run this script, make sure you pay attention to the case of your users.

  So, when running:

  Ant f $JAVA_TOP/oracle/apps/fnd/txk/util/txkSoaConfigUtility.xml addASADMINToFNDVault

  Make sure you use 'ASADMIN' and NOT 'asadmin' when it prompts you for the username ASADMIN.