Password for the user: ASADMIN is not configured error clicking on the deployed webservice

Similar Questions

• Change password for the DN of the user: (MSAD config) Shared Services

  We have the MSAD service account to configure shared with MSAD services. E.M.P. version 11.1.2.3

  As a policy, we change the password for this account. Since we do not have shared services link works in this version.

  Will work the steps below?

  1. modify the password for the service account in MSAD

  2. connect to the workspace with other admin MSAD (my user id) id

  3. change the password for Shared services configuration MSAD, under "set up user directories.

  If this approach does not work, is there another way to do this?

  One solution is to change the workspace-> administer-> workspace server

  settings-> "allow direct connection after the failure of the SINGLE sign-on:" = Yes

  This will allow you to connect without SSO assuming that there are problems with the SSO.

  (assuming you can change pw back so you can connect to the workspace).

• Default password for the root has not been changed... but there.

  I have a problem with a server ESXi in VCenter which reported that following:

  Configuration problems

  The default password for the root user has not changed.

  However, on the server, we changed the default password to our standard from the console. Is there something that needs to be done to update VCenter to check or something? It marks the host as a warning so it is certainly misleading people.

  
  Thank you.

  Hello and welcome to the Forums!

  If the ESXi host is empty, a reboot will probably clear the message.  In addition, to restart the management agents would probably erase as well.

• Change the password for the user of IOM database

  To change the password of the database user who created and the user run the prepare_xl_db.sh. I changed the < encrypted password = "true" > "false" and changed the password in the xlconfig.xml and restarted the application server, but I can not connect. I get the error below. -What else is necessary?
  
  ERROR, October 30, 2008 09:31:56, 265, [XELLERATE. SERVER], class/method: XLJobStoreCTM/initialize some problems: error connecting to the database. Please check if DirectDB is correct in the Xellerate configuration file.
  FATAL, October 30, 2008 09:31:56, 265, [XELLERATE. PLANNER], QuartzSchedulerImpl-constructor for Exception
  org.quartz.SchedulerConfigException: failure occurred during recovery of employment. [See nested exception: org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]]
  at org.quartz.impl.jdbcjobstore.JobStoreSupport.initialize(JobStoreSupport.java:429)
  at org.quartz.impl.jdbcjobstore.JobStoreCMT.initialize(JobStoreCMT.java:131)
  at com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM.initialize (unknown Source)
  at org.quartz.impl.StdSchedulerFactory.instantiate(StdSchedulerFactory.java:753)
  at org.quartz.impl.StdSchedulerFactory.getScheduler(StdSchedulerFactory.java:885)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.initialize (unknown Source)
  to com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl. < init >(Unknown Source)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.getSchedulerInstance (unknown Source)
  at com.thortech.xl.scheduler.core.SchedulerFactory.getScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init (unknown Source)
  at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4824)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4748)
  at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4936)
  at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1145)
  to com.evermind.server.http.HttpApplication. < init > (HttpApplication.java:741)
  at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
  at com.evermind.server.Application.getHttpApplication(Application.java:570)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference.createHttpApplicationFromReference (HttpSite.java:1987)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference. < init > (HttpSite.java:1906)
  at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
  at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
  at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
  at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
  at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
  at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
  at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
  at java.lang.Thread.run(Thread.java:595)
  * Nested Exception (the underlying Cause).
  org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]

  During the IOM installation datasources are created to access the database.
  Then when you change the password for the database user, you must set the password in the data sources.

• Forgotten password for XP user account and did not password reset disk, how can I get in

  Forgotten password for XP user account and did not password reset disk, how can I get in

  Michael, Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky... http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• forgot my password for the administrative account.i did not a password reset disk. AlSi o do not have a disk to recover. How can I reset my password or put them on the administrative account? __

  I don't remember what my password for the administrative account.i did not a password reset disk.  AlSi o do not have a disk to recover. How can I reset my password or put on the administrative account?

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I accidentally typed my password for the account of the user to an unencrypted page

  original title: password security

  I accidentally typed my password for the account of the user to a page that is unencrypted. The response was that the username password is incorrect, so I broke down and disconnected.  I'm worried that the password has been clearly displayed, but do not know with certainty

  Hello

  Probably won't matter if you change your password.

  Hope that helps.

• What is the default password for the new user accounts?

  I added a new administrator to my computer and changed the old standard user account, but now he asks me a password for administrator to manage accounts and I have not set up a password for the administrator. Y at - it an I can use it because I don't have the CD to reset to the default password?

  There is no default password; If you set one, it is empty.  Simply press when he asked.

• What are the consequences of the change of password for the admin user in golden gate?

  Hello

  I just picked up during surgery and allows us to replicate door data of gold. Unfortunately, the password for the user that has been created in the database for the Golden Gate has been lost.

  At the present time, processes are added and I was trying to connect but it fails with name of user and password invalid.

  I want to change it. Do I need to apply this new password anywhere after changing?

  Thank you

  Hello

  Not a lot of consequences, if you have changed the password where you had used.

  1. you must change the password of user goldengate in parameter files where ever you had mentioned, as the extract file etc..,.

  2. If you used the password encrypted, you must re-create the encryption password.

  3. If you used a user Alias id, then you must change this too.

  Kind regards

  Veera

• No password for the SYS user

  I was handed to our production database server Oracle 11 g R2 and said to manage by management. Obviously a DBA experienced / qualified isn't in the budget this year and it gives me the opportunity to learn SQL and Oracle 11 g.
  
  That being said, I noticed that when I try to connect to my instance target (SID = ide) as SYS, there is no request to enter the password for the SYS. I am basically poured directly into the database with SYS privleges.
  

  [oracle@db1 ~]$ sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.3.0 Production on Wed Jul 11 11:43:02 2012
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> 

  As you can see I was connected as user 'oracle' OS on Linux and was never invited to no password. I was wondering if this is normal in the world of database Oracle or disapproved and recommended that change some how. Can you guys please explain? I haven't used at all before Oracle so I don't know if it's good, but looks bad for me to a point of safety. Afraid I will break 11g if I fix this too.
  
  Thanks for the clarification!

  Yes, "will not work" means must obtain a password to connect.

  Please mark the answer as being correct.

  Rgds,

  Ahmer

  Published by: Ahmer Mansoor on July 11, 2012 22:20

• How to unplugged the set password for the user identified externally?

  DB version: 11.2
  Operating system: Solaris
  
  For the unix wmapp user I created a DB schema called OPS$ WMAPP as below

  create user OPS$WMAPP IDENTIFIED EXTERNALLY  default tablespace USERS temporary tablespace TEMP;

  But I put a password for this user using password command by mistake. Now, the unix user becomes

  ORA-01017: invalid username/password; logon denied

  How can I remove the password I had set? That is to say. I don't want to put any password for this user.
  
  Tried to put the password to null. It did not work

  SQL> PASSWORD OPS$WMAPP
  Changing password for OPS$WMAPP
  New password: 
  Retype new password: 
  ERROR:
  ORA-00988: missing or invalid password(s)
  
  
  Password unchanged
  SQL>

  I can't recreate this user as he has already spent in production with business objects
  
  Published by: Ken_73 on November 1, 2011 02:33

  Not sure it works so simple, but you can try

  ALTER user identified xxx outwardly;

  Currently (by mistake) the userid password authentication, you may be able to restore it.

  Werner

• Wrong password for the user

  I read 2 day s/n. Now, I'm Chapter 9. I want to read and practice.
  1. I open Enterprise Manager
  2. then enter username: sys
  password: *.
  3 Enterprise Manager opened.
  4. then I opened the backup schedule Page
  5 but when I enter username and password and click Ok this time appeared:
  
  Error - connection to the host as user sys failed: ERROR: wrong password for the user
  
  I did it with also HR user.
  This time appeared
  Error - connection to the host as user hr has failed: ERROR: wrong password for the user

  Because you must use
  The host credentials. It is not oracle usename, it's operating system user account.
  under linux, you can use oracle (membership group DBA) user in windows as administrator
  in windows, run parameters-online control panel > administration tools-online DCA political security-online user rights => logon as a work of bach and then add your OS user here.

  Published by: admin on May 5, 2010 02:40

• Rest of the passwords for multiple users in 11i

  Hi Hussein.
  
  I need to reset the password for 10 users of 11.5.10.2 Application. Please let me know what is the best way. Is it possible to reset the password of the interface as well.
  
  Thank you
  -Samar-

  Samar,

  Use FND_USER_PKG. UpdateUser API to change the password of users - see (Note: 344979.1 - users are not prompted to change their password when using Fnd_user_pkg.) UpdateUser).

  Another possible solution to force these 10 users to change their password. Modify the script in AFCPEXPIRE.sql for 10 users, you want them to change their password - see (Note: 414976.1 - how to Force all Applications users to change their password?).

  Kind regards
  Hussein

• How can I change my password for connection of Firefox? (Not the master password for the Firefox links saves itself)

  (1) how can I change my password for connection of Firefox? (Not my main password for things Firefox stores)
  (2) how can I change my password for connection of Thunderbird? (Not my master
  password for things Thunderbird stores)
  Just answer (Email removed by mod)

  You don't have to log in to Firefox. Firefox is just a browser, such as Internet Explorer. Everything you have to do is double-click it and open it. It's like Internet Explorer. If you have some sort of password extension protecting your Firefox, it's different and you need to contact the developer of the extension.