Allowing the CPP through a PIX can afford some program only numbers?

Similar Questions

• Need help to take down the netkey password so I can get some things, he won ' t let me in.»

  Original title: Netkey

  I need help for the netkey password so I can get some things, he won ' t let me in..

  We can't really help a lot with that here, but you can contact the company that makes NetKey here:

  http://www.NCR.com/contact-us

  They can help how to use them (or remove) their system.

• Error - can open the file install.log, unable to remove some programs.

  Original title: can not open install.log file.

  I am trying to clean my computer, because it is really slow. I tried to remove some programs and I keep getting this message, "could not open install.log file". Is anyway to fix this?

  Hi njfay,

  The programs that you are trying to uninstall?

  You can run the disk cleanup tool and check if the problem persists.

  Description of the tool in Windows XP disk cleanup

  Reference: optimize the performance of your computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install a webdisk on vista home 32-bit top of the system. I allowed the site through the firewall with ports 2077 and 2078.

  I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.

  Hello canmandom,

  You will need to check with Webdisk to see if it is compatible with Windows Vista.
  Check the system requirements.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect to the Internet through a router can just connect by Modem

  Hi, I am a user of the Inspiron 1525 Labtop.

  My home use 2 desktops and 1 this labtop and 2 days ago, I changed my wireless router.

  2 desktop computers connect to router with wire and there is no problem to use internet. but my laptop

  could ' t connect to the internet with no wire or cable. So, I tried to connect the Modem directly and can connect

  Internet. Only my labtop cannot connect to internet through this router (desktops work well).

  So, first I thought of my lancard which might be too old, so could not provide this new router, but no way

  because the desktop is older than that.

  Now, I want to just connect to internet with wire or wireless, either. Please help me.

  Laptop: Inspiron 1525

  O / s: Microsoft XP proffesional

  Network card: Dell Wireless 1395 WLAN Mini Card, Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller

  Modem: Conexant HDA D330 MDC V.92 Modem

  Router: Xtreme N D-Link DIR-655

  
  

• ACS5.2 joined the announcement, allowing the user through internal OK, through AD does not

  Hi all

  My ACS5.2 joined to Active Directory in Windows 2003 with success. I created the support group with user1 in the store internal, also created the Group of support-AD with userad1 in the store AD. Sequency identity store is defined internal first, then AD. I can map Support-Group to the Group of local support without any problem.

  Internal user is authenticated and authorized OK. However, if the user is a user of the AD, the rule for users of the AD is not recovered. So, by default.

  I must have missed something. Help, please. I have uploaded my screenshots. Thanks in advance.

  Robert,

  Something that I found to be very useful for troubleshooting these types of problems in ACS 5.2 is the monitoring and report viewer.  If you start it, and then choose Protocol AAA left under the catalogue, it will present you with several reports, one of them being the RADIUS authentication.  Run the report, and then select the details by clicking on the magnifying glass in one of the entrances leading to the use of the default rule.  The details are very good and will display the results of treatment step by step and when your default rule is being chosen.

  I hope this helps.

  Greg

• Using Adobe Photoshop Elements 7, recovered the photos through Carbonite, but can't find the catalog, please help...

  I have tried everything I know, but cannot locate the catalog I don't know where he is or what he would be called or what carbonite would call it. In addition, the photos aren't in the 'same' place. I have more 22 000 photos and that you can't imagine trying to re-catalogue. This is my life, and of course, I need something immediately to a family funeral. To do not too dramatic... Any suggestions would be greatly appreciated.

  Try the forum elements.

  Photoshop Elements

  Photoshop Extended uses no catalogues.  But I'm guessing that your catalog information was contained in a data or xml file.

  Nancy O.

• How can I give some privileges to a standard user account that they can access some programs without being stopped for the admin password?

  I have two accounts on my Windows Vista computer:
   
  (1.) an account admin and one
  (2.) a standard user account.

  I would like to give to the standard user account privileges, so they can access programs like spybot, without needing an admin password (he asked generally the password update spybot).

  I have read the menu permissions by right-clicking the spybot .exe file, click the securities tab and the Advanced button.
  I tried to give full control to the standard user, but still maintains he ask for an admin password.

  is there someone who can provide assistance so that certain programs accessible by standard account, but others not?

  Any help is appreciated,
  Thank you.

  Hi Hardik Mehta,

  Try the steps next to the applications you want to only allow or shortcut to run with administrator privileges

  1. navigate to the location of the .exe file programs and right click on the file .exe or right click on the shortcut to launch the program.

  2. Select Properties.

  3. click on the Advanced button.

  4. check run as administrator in the advanced properties box.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How change the registry Vista so I can add my program in the default programs list?

  Hello

  I need help to change the register of Vista so I can't add Sibelius 5 to the list of default programs.

  I need to do this for some reason when I try to open the files .sib I need to open it with a program. So why I want 5 of Sibelius.

  However, when I do this, I do the normal navigation and select 5 of Sibelius in program files but nothing happens.

  I was in Control Panel and was in default programs and all that stuff in there, but still it's not helping.

  See you soon

  Hello

  We could do this in the registry, but it shouldn't. You mention that you went into default programs, but you don't mention if you have tried successfully to associate the file .sib with Sibelius. That's what I would try first.

  (1) navigation to the "default programs":

  In "Control Panel Home", select "Programs", then on "Default programs", choose "do a type of file always open in a specific program.

  Or b:

  Search "Classic view" for the "default programs". Select "Set your default programs".

  2)

  Scroll down the list until you see. SIB. Double-click on that. Select Browse and locate the Sibelius program.

  (Note: * maybe that is your problem.) --> Make sure you browse to the EXECUTABLE file. If you access a shortcut, it will not and it may not work correctly when you try to open later.

  * And you're good to go. Once it is associated with, you should be able to double-click the .sib file and run the program. Hope this helps,

  Steve <> Microsoft Partner

• Porque mi lap top No. can open some pages only antes if podia como o el hotmail facebook?

  No to en porque no puedo open several pages como o hotmail facebook?

  there some other is partially... lo o is en blanco lo no puedo open el contenido

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• What are the causes a cursor to shimmer on some programs

  When I do not work in Windows Media Player or Windows Media Center my cursor starts to shimmer and I plant?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• How can I ensure that only known AP to connect to WLC

  I have a Cisco 2112 WLC with of 1131 LWAP

  How can I ensure that only known AP to connect to the WLC?

  Thanks in advance

  Richard

  Hi Richard,

  You can use allow the PA against AAA to make sure that all AP registering on your WLC are allowed the AP network.

  By activating this feature, only these AP whose mac addresses are present in the list of permission, will be able to register at the WLC.

  This list of authorization may be present externally on a server or a local list on the WLC himself. The link below explains in detail:

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a00808c7234.shtml

  Another feature, which has already been mentioned in this thread, is the unreliable detection. With this feature, the WLC will be able to detect any access point that is not a part of his band RF and contain them.

  Please see the document below for more information in this regard:

  https://www.Cisco.com/application/PDF/paws/70987/rogue_detect.PDF

  Kind regards

  Stéphane

• Can't my programs to work!

  How do I stat a program that has the work stoppage?

  Uninstall and reinstall.

  And read this:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• This allows the customer Cisco VPN through PIX

  Hello. I seeks to allow the client VPN Cisco of LAN of the company to remote resources.

  It's put PAT in place on the PIX and I'll add the following lines to the ACL in the inside interface to allow access to the customer:

  permit tcp x.x.x.x y.y.y.y eq 50

  permit tcp x.x.x.x y.y.y.y eq 51

  permit udp x.x.x.x y.y.y.y eq 500

  permit udp x.x.x.x y.y.y.y eq 4500

  I have not done something like this before so I don't know if that will be enough to allow the connection of the client to remote resources.

  I have to do something else to make it work?

  That should be good for the local pix, but make sure that nat-traversal is enabled on the remote device.

  ESP and ah protocols, not ports. 50 and 51.

  esp x.x.x.x y.y.y.y permit

  allowed ah x.x.x.x y.y.y.y

  permit udp x.x.x.x y.y.y.y eq 500

  permit udp x.x.x.x y.y.y.y eq 4500

• I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool.

  Remote Desktop does not work

  Hello

  I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool. I already checked several options, but nothing seems to work. I don't even get an error message, the window just those which blinks and nothing happens...

  Could you please help?

  This is wat I already checked:

  -"allow users to connect remotely...". ' is running

  -TCP/IP listening on port 3389

  -Terminal services are started

  -J' tried connecting to Windows 7 and Windows XP, nothing works

  -Ping the ip address of the client PC works fine

  If you have any other ideas, I would be very gratefull!

  Thanks to advandce

  You will probably need to open port 3389 on your router so that it maps on the computer that is tuned to the connections of the DRC. It seems that you did all the other steps, but your router can prevent the connection to go anywhere. Here's a detailed guide to configure your router for DRC that can provide some guidance.