Allowing the user to click on the boxes in any order

Similar Questions

• Allow the Box Firmware

  Hello

  Guy of NetApp works with Dell now so please be nice. I am working with a 6510 and I need to know what firmware is out of the box. I installed tools HIT and I am working on acquiring network. I need to know because of 2 other 6510's in the group who run a certain rev. Also it won't let me build just outside it does give me the option to ignore the group settings which is fine as long as it's 6.x.x and not a 7.x.x. I spoke with a representative who said that this would cause a problem if he walked in my group.

  One side is not due to have it not on the network, I'm not able to use the "Setup Wizard" im assuming that i will be once completed the series 'setup '. I guess correctly? I'd be able to smell it by using the "initialize an array" after that? Thank you.

  It depends on the settlement date.   If the latter, 6.0.6 - H2 is the likely version.    What version of firmware is the Group running?

  Also you will not be able to put in place without being the first on the network, even using the serial port.

  However, if you you connected in series, and then cancel the installation process.  You can do it.

  CL > support exec 'uname - a' which will make the firmware version information.

  According to the version of the firmware of the existing group, you will not be able to add it to the current group.  That is it the Group current is 7.0.x or and older version 5.x.

  The release notes for the firmware and the firmware upgrade instructions talk about what revisions are working together.

  All berries EQL should run as a minimum 6.0.8 firmware.   All members of the group must be at the same level of firmware revision.   In the short term, you can mix compatible firmware levels in a group.  That is, during the time it takes to get to level.   Not for long-term production.

• I can't reset the settings by default in photoshop, which will allow the 'mini' bridge any ideas?

  I tried to uninstall and install the program. I take a class and I need to open the 'mini' within the program bridge.  The instructions were to open the program because it has been opened, press CTRL, alt, and shift to access default settings. I did and the guest came and asked if I wanted to go to default settings, I answered Yes. The program has continued to open and would have disclosed the mini tab bridge low left c@orner of the application page, nothing shows up. It's my dilemma.

  Hello

  The Mini Bridge Panel is no longer available in the most recent major version (15.x) of the Ps CC aka 2014. You can install the previous major version, Ps CC (14.2.1) using the creative Cloud desktop application.

  Using creative cloud | Install, update, or uninstall applications

  Kind regards

  Steve

• How can you force a user to click all the buttons on a slide?

  I have a slide with a scenario and four option buttons, of which three are good options. I would like that the learner to click on the correct three buttons, which each give comments, before the continue"" button. I have scripted an advanced action to show that the key to continue only after all three keys user has clicked. For some reason any, when I saw the project continuous slide without interruption after I click on the first button. All the buttons are set to show a hidden legend and break after 2 seconds. How can I set up my calendar to (a) allow for the learner to decide which buttons to click and (b) a break long enough to allow him to make that decision? I am using Captivate 5.5, incidentally.

  I am sure that I am doing the equivalent of Captivate to forget to wear one, but I'm unfortunately stuck. Thanks for any help you can give me!

  Krista

  Hi Krista,

  I think your buttons have the same point of suspension, and given that the sequence is not imposed which is logical. But when you click on a button, the normal behavior is that the playhead continues. Can you please post a screenshot of the timeline and your advanced action? Maybe you need to go back the playback head. I call this micro-navigation and blog about it:

  Micro-navigation in Captivate

  When the continue button appears, make sure that its suspension point is later than the other buttons

  Lilybiri

• I get a message that says that I must allow the computer when you try to download music purchased at the newly bought laptop.

  Original title: iTunes Question

  I recently bought a new Windows 7 laptop and downloaded iTunes. I have hundreds of songs already purchased and need to download on this computer... when I access my account and then click on download, I get a message that says that I must allow the computer. Any suggestions on what to do?

  Thank you!

  You can check with Apple because they created iTunes.  Check the Apple Web site, I found the following FAQ on what you need to do to allow a new device:

  1. Open iTunes
  2. From the Store menu, choose authorize this computer.
  3. When prompted, enter your Apple ID and password, and then click allow.

  Note: if you already allowed iTunes to another PC and that you no longer use this computer, you should have allowed him out before getting rid of it.  If you don't do this, you might consider off allowing all devices first, then allowing the new PC.

• It is Possible to the box of the card for a drop down field?

  Hello

  So I have a form with about 20 boxes on it that allow our customers to choose what information they want to receive it. Recently, we have created a new field of Contact in Eloqua/SalesForce which, in theory, would allow the boxes to populate the list and then move to Eloqua.

  So my question, is possible to map checkboxes from the drop-down list field of Eloqua? So, allowing me to having spent them in SalesForce.

  Any help would be greatly appreciated.

  John

  Hi John,.

  This is without any doubt. The boxes on the form must be inserted using a box multiple option (called 'Boxes'), which is filled with a selection list (not a field of each box for each item in the box). You can assign the same selection list to contact your field and specify that you want the field to be a multiple selection. Then you can simple map of the form field that collect multiple checkbox data to the name field of the contact with the muti selection list in your form processing steps.

  I hope this makes sense.

• IPod plays the tracks out of order

  Hello! I use IPod for the first time, I put manually audiotracks using iTunes but it will not play in the order I put them. IPod is not defined on the random mode. Can you help me? Thank you

  Here's my playlist and you can see in the picture he's started playing from 15 Minute drama: A Small Town Murder':

  

  The little chevron at the top of the left column of numbers shows you the reverse order. If you really want the order shown, right-click on the name of the playlist in the sidebar, click on copy to play order in the context menu, then click the chevron to reverse the list in ascending order. Otherwise, just click the chevron and begin to organize the elements in any order you want. Then synchronize. Your list should now play in the right order on the device.

  TT2

• (Click two boxes) Text caption of failure that appears when the user double-clicks

  Hello

  I have two boxes a slide is clicked > the first click box is a simple click and the failure text caption is enabled > the second click box is a double click action, and the legend of the failure is not enabled.

  When a user double-clicks on the second, click on the box that the legend of the failure is displayed from the first caption text.  I'm cpatibvate is picking up the second click of the double click and so incorrect display in the first legend.

  Is there a way around this problem?  ISome contribution to this issue would be greatly appreciated:

  

  Clickboxes are set up so that if you have the legends of failure turned on, then a click outside the click box triggers the failure criteria.  So if you have two of them on the same slide, each will be considered a failure if you click on it.

  Buttons work a little differently, then you can try to use the transparent buttons instead.

  Another alternative is to use the widget event handler, which allows to implement various widgets to listen to different mouse events.  The beauty of these widgets is that you have much more control over the criteria of rupture because you can specify events of different mouse for the success and failure on each of them.

  Find out here: http://www.infosemantics.com.au/eventhandler

• I have been unable to untick the box "Allow user to administer this computer" in the preferences users and groups of the system...

  I took to allow a user to administer by checking the box "Allow user to administer this computer" of the user in the users window and groups in system preferences.

  I tried to uncheck the box, but it remains unchanged.

  You must be logged in as a different user than the one you are trying to change, and your own user name must be an administrator on this system.

• I tried to set the fast user switching, but when I click on save changes and go back, the box isn't here.

  Original title: cannot switch on Windows XP users

  My problem started on December 3, 2011 when I left my computer for lunch. When I came back, my screen saver was. He asked me to enter my user account password to log back, it does not take me to the Welcome screen. Then I entered my password and logged on. I tried to give to fast user switch, but when I click on save changes and go back, the box isn't here.

  My system
  OS: Windows XP Pro
  Media Center Edition
  Version 2002
  Service Pack 3

  If the system restore didn't help, use the line 34, left side of the http://www.kellys-korner-xp.com/xp_tweaks.htm

• I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on

  I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on out of the box with this message, I get a different dialog box including the message says "it has not chosen to print pages".  Any suggestion would be appreciated.

  The way I got it to print has been:

  Without opening the program, in the list of applications, move on to Adobe Reader and right click, select Properties.

  Go to the compatibility and click 'run as Admin '.  Reopen the application and all prints for me now.

  (This can only work with your personal computer if?)

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• How to make a text field required at run time when the user clicks on the box?

  I had a form, there are several checkboxes fields and the text associated with the check boxes. If the use clicks on the checkbox then partner

  text fields should become mandatory. I tried the change event and the click event of the boxes. There is error in the onChnage event and I got some odd results in the click event on. Sometimes, if the user clicks the check box, then for the 1st time the field is not required, then the user onclicks the box and when the user clicks the check box for the second time the field becomes necessary, but if I turns off the option highlight the field and selects the field becomes necessary even if the user onchecks I am totally confused! To add that I have also written an incorrect code always I reached the goal? How it can be possible. I write the codes below, please help me because I am working under a deadline from the client.

  onChange event:

  var = this.boundItem (xfa.event.newText) newVal;
  if(newVal == 0)
  {
  xfa.resolveNode ("form1. Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1'). validate.nullTest = "disabled";
  }
  on the other
  {
  xfa.resolveNode ("form1. Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1'). validate.nullTest = 'error ';
  }*/

  For the onClick event:

  var a = xfa.resolveNode ("form1..") RawValue Subform0.Subform1.Subform9.Subform10.Table48.row2.CostItemRecovere d_OnlyEnergyCharges");
  App.Alert (a);
  if(a == 0)
  {
  xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck__L1_1").validate.nullTest = 'error ';
  }
  if(a == 1)
  {
  xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck__L1_1").validate.nullTest = "disabled";
  }

  Please help someone!

  Hello

  You may need this resolved at this point, but here are a few tips.

  An example of a loop in a dynamic array is here: Re: how to make invisible/visible or hidden columns with checkbox?

  You are usually not necessary to resolve the nodes, especially when the script object is in the same table as the target objects.

  For example if the table was not static your script could be simplified:

  if (this.rawValue == "1")  // this object is in Row2
  {
       Row4.ComplianceCheck_L1_1.mandatory= "error";
  ...
  }
  

  However because you will be to loop through all the rows in the table repeatable instances / then you need to resolve the nodes. Take a look at the example above.

  In your script, you have to Row8 Row4. I don't know if this is repeatable or just some of them. If we take Row4 as being repetitive, then you can apply the following to all repeatable lines.

  var vRow4 = Table48._Row4.count;
  console.println("Row4: " + vRow4); // You can delete this or comment it out after testing
  

  if (this.rawValue == "1")  // this object is in Row2
  {
       for (var i=0; i
  I have not tested, but it should be close to work.
  Good luck
  Niall
  		   

• Click on the box that allows to open the pdf file problem

  I want to give learners the opportunity to open a pdf file with additional information, a link to a click box. I want learners must be able to close on the pdf and return to the same screen in the lesson when they end to read the pdf. Currently, it behaves not as I expected.

  I put the box click on the help link "on success, open URL or pdf ' and selected attributes 'New',"Keep playing the project"."  I have been using the various preview modes to test the features and find that it works as expected; Is that a second window opens with the pdf file that can be closed, leaving the main screen not affected. In the browser HTML mode puts a new tab which I can get back to the main lesson. I don't like that option as well.

  We are now my questions:

  • Is there a way to display the secondary file as an independent rather than a tab pdf file, as it does in preview mode, "from this landslide"?
  • Also, is there a way to stay on this slide parent once I have returned, then reopen the secondary window even if I want to? Currently, if I try, I'm transferring to next slide rather than the secondary window opens again.

  Thanks for your help.

  Thank you Rick. I'll fix the first issue. I'm sorry to hear that I can't do

  what I want by the second issue but can live with it.

  Chris

• Why is the box allow cutting down

  Very annoying to allow guard falling on almost all the sites I. I then click on it and it keeps constantly falling back down.
  I can click it a dozen times and it just re appears. Ready to drop Firefox, even if I go to options and uncheck the pop ups, it doesn't matter.

  It seems that you have accidentally activated a function of access designed to avoid confusion for users with screen reader software. You can turn off here:

  "3-bar" menu button (or tools) > Options > advanced > general mini-onglet

  In the upper part, uncheck the box "warn me when websites try to redirect or reload the page.

  What is fix?