Alternative to the ADF date. MinValue

Similar Questions

• Read channels alternately on the Agilent data logger

  Hello world

  I'm finalizing a code. I remotely control my Agilent 34970 and I want to read channels one after the other. I have an actuator in the device that is also controlled to close and open channels.

  The actuator channels are 201, 202... 220

  Channel multiplexers are 101, 102, 103... 121

  I want the code to close 201 and read 101, then open 201 before going out to close 202 and read 102... etc.

  At the moment what I close all of the cylinder at a time and read all the channels that is not what I want. I know a little long hand to do this is to have so many sequences, but I want to know if there is a shortcut, a little.

  A printscreen of the façade of what I currently have is attached.

  PS: I'm relatively new using labview. I'd appreciate any help I can get.

  Maybe use a loop FOR.  Put all your settings in tables and autoindex berries enter the loop FOR.  Inside the loop, you can close a relay, read a value, and then close the relay.  Repeat for as many channels and samples as you want.

• How to hide the component date. MinValue (like the secret of entering text attribute)

  Hi Experts ADF,
  
  Can someone help me to hide the entry date.
  I need to display "DD/MM/YYYY' as a dummy value if the user does not have permission to view the date.
  
  As the date. MinValue is not a secret as inputText attribute, if anyone can help on how to display the fictitious value based on a condition.
  
  Thanks in advance.
  
  Mohan

  Hello

  Why not add the two below in the column?

  
  

  With the EL to determine rendering, either one of the two will show

  Frank

• Is there an alternative to session storage in the ADF?

  Hello..
  
  Is there a good alternative to store values in the ADF session? What happens if the session is lost?
  
  
  Thank you
  
  Published by: Lovin_JV_941794 on March 7, 2013 21:48

  Hello

  the answer is simple, isn't it? What persists beyond information session?

  i. cookies
  II: tables of databases

  There is no rule that says information must be stored in a session. The important use cases and usually the session contains only the data required for a session.

  Frank

• How to use several adf 12 shape and insert the form data in to table during the click on "submit" button

  How to use several adf 12 shape and insert the form data in to table during the click on "submit" button. Can we use several form from adf or not?

  Make sure that you dragged the VO based EO.

  Also make sure that the VO attributes based EO Updatable property.

  The query according to VO is used only to add LOV to the column of the original VO ModelId.

  See you soon

  AJ

• Problem server standard weblogic that does not detect the application of ADF data side

  Hi all

  I use the jdev11.1.1.7.0 version.

  I have deployed an adf on oracle weblogic server application. When to test a page server-side it dispalyed but with blank fields. When I try to insert the data, it shows an error like "lines cannot be created in the entity xxxx.eo (name of the entity with path mentioned on Jdeveloper). This same code is deployed in the weblogic server local and works very well.

  For DB connection: I created a JNDI connection and used on the configuration of the application module. DB connections are tested. they work very well on the server side.

  Could someone help on why the error comes from the side server.

  Thanks in advance,

  Suresh.

  Hi all

  Thanks are for all of your support.

  Problem is solved. It is may not be bounce oracle weblogic server.  After the rebound of the server, the database data is displayed in pages.

  Thank you

  Suresh.

• How to change the font color or the background color of the field date. MinValue based on its value

  Hello world

  jdev Studio Edition Version 11.1.2.3.0.

  I have a date field of the entry in the table of the adf. I want to change its color (font or background) if the date is less than the current date.

  I use jdev Studio Edition Version 11.1.2.3.0.

  Thank you

  You must have a date property in a bean that allows you to get the current date. That you can use in a for EL compare to the date in the table and set the inlinestyle as accordingly

  #{lt mybean.currentdate row.datetocheck?-color: Red ":" "}

  mybean. CurrentDate is the method that returns the current date of the bean method.

  Timo

• Form of the ADF for data structure with several child records

  Jdev version: 11.1.1.2.0
  
  I have a data structure with a one-to-many parent-child relationship. I give an example of the data structure.
  
  Employee table:
  ----------------------
  EmpId
  EmpName
  Salary
  
  Table Historiqueemploye:
  -------------------------------
  EmpId
  Previous_Employer
  From_Date
  To_Date
  
  
  In the ADF form for entering data for a new employee, I want to give a layout (say, a button "Add row") for the history of the employee's employment. How can we succeed in ADF?
  
  I'm new to ADF. Would be grateful if someone can help me with detailed steps or a link showing such a demonstration.
  
  Thanks in advance.

  Hello

  If you exposed a View for the Historiqueemploye table object, then simply drag this point of view as a form and then drag and drop the create operation (within the structure of the View object in the data control palette) as a button for the new line is created. If you do not always display the historical, add it to an af:popup and start button context menu create or hide the af: panelFormLayt that a form is added by default.

  Frank

• The center of the ADF table column data

  I use JDeveloper 11.1.1.6
  
  I would like to be able to focus some of the attributes stored for some columns in my table of the ADF. Here are 2 of the columns in my table ADF I tried to center data. For some reason, the data remain justified left. In my skin file I am centering the header values for all columns in all tables. I don't want to do that, but with the row data. For row data, I want to selectively choose the columns that are left centered or justified. Do you have any ideas on what I'm missing.
  
  
  
  < af:table value = "#{bindings." Data1.collectionModel}.
  var = "row".
  lines = ' #{bindings. " Data1.rangeSize}.
  emptyText = "#{bindings." Data1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." Data1.rangeSize}.
  rowBandingInterval = '1 '.
  Binding = "#{backingBeanScope.backing_ui_pages_DataDispatch_Processing_update." Table"}
  ID = "myTable" columnStretching = "last".
  rowSelection = "single" displayRow = "selected".
  selectedRowKeys = ' #{bindings. " Data1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." Data1.collectionModel.makeCurrent} ">"
  
  
  ...........
  
  
  < af:column sortProperty = "MyId" sortable = "false".
  headerText = "#{bindings." Data1.hints.MyID.label}.
  ID = "c1" >
  < af:outputText value = "#{rank." MyId}"id ="ot10.
  inlineStyle = "" text-align: center; "/ >"
  < / af:column >
  < af:column headerText = "#{bindings." Data1.hints.size.label}.
  ID = 'c4' width = "75" >
  < af:selectOneChoice value = "#{row.bindings.Size.inputValue} '"
  label = "#{row." Bindings.Size.label}.
  required = "#{bindings." Data1.hints.size.mandatory}.
  shortDesc = "#{bindings." Data1.hints.size.ToolTip}.
  ID = "soc3" readOnly = 'true '.
  inlineStyle = "" text-align: center; ">"
  < f: selectItems value = "#{row.bindings.Size.items} '"
  ID = "si3" / >
  < / af:selectOneChoice >
  < / af:column >
  
  
  ...........
  
  
  < / af:table >

  I'm sorry. The attribute align = 'center' is at the level of the spine.

  Try this:

  Try this:

  
  var = "row".
  lines = ' #{bindings. " Data1.rangeSize}.
  emptyText = "#{bindings." Data1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." Data1.rangeSize}.
  rowBandingInterval = '1 '.
  Binding = "#{backingBeanScope.backing_ui_pages_DataDispatch_Processing_update." Table"}
  ID = "myTable" columnStretching = "last".
  rowSelection = "single" displayRow = "selected".
  selectedRowKeys = ' #{bindings. " Data1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." Data1.collectionModel.makeCurrent}">

  ...........

  
  headerText = "#{bindings." Data1.hints.MyID.label}.
  ID = "c1" align = "center" >
  
  
  
  ID = 'c4' width = "75" align = "center" >
  
  label = "#{row." Bindings.Size.label}.
  required = "#{bindings." Data1.hints.size.mandatory}.
  shortDesc = "#{bindings." Data1.hints.size.ToolTip}.
  ID = "soc3" readOnly = 'true '.
  >
  
  ID = "si3" / >
  
  

  ...........

  Thank you
  Nini

• Publish all by accessing the data in the row selected in the table of the ADF...

  Hello
  
  I try to get the data of the selected line in the bean on the change of SelectOneChoice in a column of table of the ADF.
  
  There are two definitions of node in the iterator. When I try to access the data in the row. I see that the first definition of node data.
  How to access the definition data another node?
  
  I'm trying to access the "sponsorId" of the iterator. I use the code below. But his return null pointer exception.
  
  The code I use to access the data in the row:
  
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding = dcItteratorBindings
  bindings.findIteratorBinding ("sponsorIterator");
  ViewObject voTableData = dcItteratorBindings.getViewObject ();
  Line rowSelected = voTableData.getCurrentRow ();
  System.out.println (":" + rowSelected.getAttribute ("sponsorId")); I am able to see the data correctly for sponsorCodeDesc, sponsorPercentage, sponsorStatusDesc
  
  This is the iterator used for the table (page def):
  
  < Tree IterBinding = "sponsorIterator" id = "sponsor1" >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.ConferenceType.Sponsors.Sponsor"
  Name = "sponsor10" >
  < AttrNames >
  < item Value = "sponsorCodeDesc" / >
  < item Value = "sponsorPercentage" / >
  < item Value = lie "sponsorStatusDesc" = "sponsorStatusDesc" / >
  < / AttrNames >
  < accessors >
  < item Value = "sponsorDetails" / >
  < / accessors >
  < / nodeDefinition >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.SponsorType"
  Name = "sponsor11" >
  < AttrNames >
  < item Value = "sponsorId" / >
  < item Value = "sponsorName" / >
  < item Value = "isIEEE" / >
  < item Value = "isNonProfit" / >
  < item Value = "sponsorAcronym" / >
  < item Value = "sponsorDesc" / >
  < item Value = "sponsorEmail" / >
  < item Value = "sponsorComment" / >
  < item Value = "sponsorTypeId" / >
  < item Value = "sponsorTypeDesc" / >
  < item Value = "sponsorActive" / >
  < item Value = "societyNumber" / >
  < item Value = "businessUnit" / >
  < item Value = "createdBy" / >
  < item Value = "updatedBy" / >
  < / AttrNames >
  < / nodeDefinition >
  < / tree >

  you have not yet a selectionlistener linked to the table... to make the currentrow as the selectedRow...
  Can u please add the selectedRowKeys and the selectionlistener in the table as

  selectedRowKeys = "#{bindings.sponsor1.collectionModel.selectedRow} '"
  selectionListener = "#{bindings.sponsor1.collectionModel.makeCurrent} '"

• date of post at the level of the adf pages?

  I have a date of field who I need to validate using the following validation criteria
  
  date cannot be a future date
  
  is there any future provided by the adf?

  Hello..
  Still having problem. If so, please share your code.did you try code above, stuff that works for me. In the above code change Date java.util.Date in the bean and try...

• How to pre-fill the ADF form with the data?

  Hi guys,.
  
  I was wondering how you go about the generation of a pre-filled form of ADF. Is this something that is done if the designer of the ADF and the business objects? or do you create database tables stay and bind in the ADF and the workflow. Specifically, I want that if a user is presented with a several drop-down lists when the human task of the initiator is executed.
  
  Thank you
  Ross

  Hi Ross
  1. Yes, in all first place in the database, we added all the data manually for all research. Its our own schema custom. We plan to provide a few simple administration screens in a different WebApps to maintain these values to search. Note that it is a different simple ADF application, with a layer of EJB and EJB layer calling this and get/update database values.

  2. in ADDITION, we have a few search values we get from system/application totally another as Oracle EBS Suite. To do this, we have created custom schema. In this custom scheme, we have a few stored procedures created by the developers of EBS database (they are more familiar with EBS). Now in our EJB layer, we use architecture JPA, call these stored procedures and get all values for the search and display in the TaskDetails page. These values are maintained in EBS itself, so we have not all custom within our SOA/BPM project admin screens.

  In conclusion, our SOA/BPM applications, we have 2 databases. First database is for components SOA where we run RCU comand and there all SOA_INFRA, MDS, diagrams ORABAM etc. The second database is for our custom schema specific to our application. Here, we have our own lookup tables, custom table and all cutom stored procedures than coonect to external EBS etc. Weblogic console, we have just to create a data source for this second database and use layer JPA (persistence.xml file). For the first database, you already know that in the creation of the field itself, it will create all sources of data also.

  Thank you
  Ravi Jegga

• No data refresh after edit on the page of the adf.

  Hello
  
  I was pulling my hair out for a week now. try to look for the answer to my problem, but no luck. hope someone can help me.
  
  Here is my case:
  I am train to the top of the adf + ejb3, weblogic 11g + mysql, I had developed a simple solution to test the reference technology. I created 2 database table, the Department and employees.
  
  I follow the example of Oracle with success and created the model and the Joint Strike Fighter. I have 3 jsf, search.jspx, new.jspx, query.jspx. inside the search.jspx, I used the named criteria for the data control to create the query page and he successfully recover the data on employees of mysql with the name of the service of the department table. but when I try to edit the existing record and navigate back to the search.jspx, the name of the service (from the department table) was empty. no way, how I made, refresh the page by pressing the search button, the name of the service just refuse to come out. until I have start the weblogic server.
  
  Help, please.
  
  Thank you
  Vince
  
  Published by: 817229 on December 19, 2010 16:27
  
  
  Hi all, can - does anyone know how to solve the problem mentioned above? Help, please. Thank you.

  try adding the following line in persistence.xml ejb

  
  

• Get the value of the ADF component when the control of data bindings are not used

  I'm doing some development with 11.1.1.1.3.0 JDev ADF. What is an apt approach to retrieve the values of the ADF Faces (in page jspx) components in the Managed Bean page? I do not have the use of ADF AM and no data controls.
  
  Published by: sackam on 10/17/2010 14:58

  You can access the value in a bean to support using an item.getValue ().
  Basics listed here:
  http://blogs.Oracle.com/Shay/2010/03/working_with_backing_beans_in.html

• Does not receive the current date in InputDate Field when MinValue setting...

  I drag and drop a field entry Date in page jspx... To define the MinValue as the current date, I bind the MinValue to a variable declared to the backingbean... When I want to select the current date, * current date is diasbled... * But the message is displayed as "* enter a date on or after 06/29/2009 *"... * how to select current date * (29/06/2009)...
  
  Jspx page code
  ===========
  
  * < af:inputDate label = 'Release Date' id = 'ipdtDate. "
  * Binding = "#{backing_RelPlan.ipdtDate}" *.
  * MinValue = "#{backing_RelPlan.Today}" / > *.
  
  + backing bean contains +.
  =======
  * Date now = new Date(); *
  
  * public Sub setToday (Date today) {*}
  * This.Today = today; *
  *}*
  
  * public Date getToday() {*}
  * return today; *
  *}*

  Hi Briston,

  somehow, you must set the time to midnight or cut. It works for me:

  package brano.test1.view;
  
  import java.text.SimpleDateFormat;
  
  import java.util.Date;
  
  public class MyBB {
      private Date today;
  
      public MyBB() {
          SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
          try {
              String stringToday = sdf.format(new Date());
              today = sdf.parse(stringToday);
              System.out.println(stringToday);
          } catch (Exception e) {
          }
      }
  
      public void setToday(Date today) {
      this.today = today;
      }
  
      public Date getToday() {
      return today;
      }
  
  }
  

  Kind regards

  Branislav