Always focus on the Page

Similar Questions

• Setting Focus when the Page is loaded

  Apex 3.2

  Theme 15

  IE8

  I'm trying to focus on the loading of the page with javascript

  OnLoad = "$f_First_field ('P10_BMI_EXTKEY')" "

  Now users have asked for this field a dynamic default value (always 4 characters),

  for example, DEM -.

  I'll put this using one before the header is calculated.

  How can I set the focus when loading for the fifth character in my field, that is to say, after DEM -.

  Thanks in advance

  Gus

  Gus,

  It's true. SelectionRange works only when the focus is actually on the ground. Indeed, so you will first need to focus on the issue and then run the code selectionrange. Take care of property: the post SO talking about a 'problem' of synchronization, where the focus is always past before execution of the selection range. Try it, you need it. Basically, with the polyfill in place you will be able to use the code in the linked thread stackoverflow. To keep your manageable onload tag, you can move the focus + selection code in a function.

• Order of focus in the page start, with icons

  I'm doing a menu with icons on a start page.

  Let's say I have these clickable icons:

  [A] [B] [C]

  [D] [E] [F]

  [G] [H] [I]

  A, B, C are in a HFM.

  D, E, F are in other HFM.

  G, H, I in another separate HFM.

  Some examples so that you can understand my pain:

  -Imagine that we focus on the 'E' right now and scroll us down with the TrackBall. In a normal menu, one would expect the focus on "H". But, in this situation, because they are not inside the same manager, the system out of his manager and will focus on the first field of the next Manager, witch is here 'G '. This is not what I want.

  -Imagine that we focus on the 'E' now and scroll us right with the TrackBall. In a normal menu, one would expect the focus on 'F' 'E' and 'F' are inside the same manager, the system will focus on the other field which is here 'F' This is what I want.

  Now, here's what I want:

  I've set up a Visual menu with icons where users can scroll through one icon to another. My problem is that when I scroll upwards or downwards in the menu, instead of going to the next icon slot, it just goes to the first icon to the next handler.

  I tried this code...

   Field SelectedField = getField(getFieldAtLocation(x, y));
  

  Is there a way to loop in non-gestionnaire field?

  Here's the complete substitution

     protected boolean navigationMovement( int dx, int dy, int status, int time ) {      int direction;
  
        // DX -> Positive means going RIGHT, negative means going LEFT      if ( Math.abs(dx) > Math.abs(dy) ) {         if( dx > 0 ) {            // x += 1            direction = RIGHT;         } else {            // x -= 1            direction = LEFT;   }     // DY -> Positive means going DOWN, negative means going UP      } else {         if( dy > 0 ) {       // y -= 1     direction = DOWN;  } else {     // y += 1     direction = UP;         }      }
  
        Field FieldWithFocus = getLeafFieldWithFocus();      Screen active_screen = getActiveScreen();      int scrHeight = active_screen.getHeight();
  
        switch(direction) {         case DOWN:      for(int y=0; y < scrHeight; y++) {               int x = FieldWithFocus.getLeft() - (FieldWithFocus.getWidth()/2);               Field SelectedField = getField(getFieldAtLocation(x, y));               if (!SelectedField.equals(FieldWithFocus)) {                  SelectedField.setFocus();          }            }       break;     case UP:            for(int y=scrHeight; y < 0; y--) {               int x = FieldWithFocus.getLeft() - (FieldWithFocus.getWidth()/2);               Field SelectedField = getField(getFieldAtLocation(x, y));               if (!SelectedField.equals(FieldWithFocus)) {                  SelectedField.setFocus();           }            }       break;         case RIGHT:            for(int x=0; x < scrHeight; x++) {               int y = FieldWithFocus.getTop() - (FieldWithFocus.getWidth()/2);               Field SelectedField = getField(getFieldAtLocation(x, y));               if (!SelectedField.equals(FieldWithFocus)) {                  SelectedField.setFocus();               }            }     break;         case LEFT:            for(int x=scrHeight; x < 0; x--) {           int y = FieldWithFocus.getTop() - (FieldWithFocus.getWidth()/2);          Field SelectedField = getField(getFieldAtLocation(x, y));         if (!SelectedField.equals(FieldWithFocus)) {             SelectedField.setFocus();          }      }             break;                       }
  
           return true;      }   }
  

  Someone has a method to change the order of control within several managers focus, so you can help me.

  I finally was able to develop a solution. Boolean th table defines where are my items, as a game of battleship. If (0.1) == True then an object is supposed to be there on the screen.

  /**
  We need to buid a multidimensional to define table of Boolean where are our fine objects in focus
          
  Button
  Index (index table)
  |
  V
          
  0 | T T T T T
  1. T F F F F
  2. F F F F F
  3. F F F T T
  ---------------
  0 1 2 3 4<- hfm="" index="" (first="" index="" in="">
          
  ex:
  If (bool_objects [0] [0]) {}
  Code here...
  }
          
  **/
  final boolean [] [] bool_objects = {}
  {true, true, false, false},
  {true, false, false, false},
  {true, false, false, false},
  {true, false, false, true},
  {true, false, false, true}
  };

  Now, assuming that we have this chart, we need code so that each button works:

  protected boolean navigationMovement (int dx, int dy, int, int time status) {}
  System.out.println ("Focus" + coord [0] + "," + coord [1] + "") ");"
  If (Math.abs (dx) > Math.abs (dy)) {}
  If (dx > 0) {direction = RIGHT ;} else {direction = LEFT ;}}
  } else {}
  If (dy > 0) {direction = down ;} else {direction = UP ;}
  }
                  
  int coordx = coord [0], coordy = coord [1];
                  
  {Switch (direction)}
  box BOTTOM:
  for (int y = coordy + 1; y)< bool_objects[coordx].length;="" y++)="">
  If (bool_objects [coordx] [y]) {}
  Coord [1] = y;
  BMP [(5*y) + coordx]. SetFocus(); break;
  }
  }
  break;
  case to the TOP:
  for (int y = coordy-1; y > = 0; y-) {}
  If (bool_objects [coordx] [y]) {}
  Coord [1] = y;
  BMP [(5*y) + coordx]. SetFocus(); break;
  }
  }
  break;
  case RIGHT:
  for (int x = coordx + 1; x)< bool_objects.length;="" x++)="">
  If (bool_objects [x] [coordy]) {}
  Coord [0] = x;
  BMP [(5*coordy) + x]. SetFocus(); break;
  }
  }
  break;
  case to the LEFT:
  for (int x = coordx-1; x > = 0; x--) {}
  If (bool_objects [x] [coordy]) {}
  Coord [0] = x;
  BMP [(5*coordy) + x]. SetFocus(); break;
  }
  }
  break;
  }
  Returns true;
  }

  This code is catch the movement of the trackball and check if an object exists in this direction. If so, then setFocus on it, nothing else.

• My browser suddenly always opens on the page it is on when it was last closed and use the tabs even if I turned them off. I tried to reinstall.

  I have my browser open comcast.net Web page and never use tabs. I use firefox for years and am very familiar with it. He suddenly started opening on the last page, he was away when closed and began to use tabs. When I remove Firefox from my computer, he still all my settings. I had this problem once before years and finishes having to delete my entire drive to fix. I would avoid a wipe away this time. I need to know how to get ALL of the browsers install deleted registry information, so I can get a really fresh. And Yes, I have tried all the normal channels and I'm pretty computer savvy. Please help before I go nuts. I use the version the most recent, but that goes back to the old versions didn't help either. Thank you.

  Bob Smith

  Software sometimes external will create or update an optional parameters file named user.js. For some reason, one of the things that often turns in there is a preference to restore your previous session at once. However, because Firefox uses user.js to override your normal parameters, whenever it starts, which then turns into a permanent change.

  More contact information system (next to your message) shows that you have a user.js file. To check what are the benefits and/or remove, try this technical support article: How to fix preferences that will not save.

  Note that by default, Windows hides your search Firefox profile folder and facilitate navigation in Windows Explorer. You can access the folder from inside using Firefox

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should start the folder in Windows Explorer.

  A little luck?

• Is 802.11n always focused on the network hub?

  Hi all

  Whenever we talk about 802.11 wireless network, we consider that it is a network hub. However, 802.11n supports MIMO which can receive means while one antenna transmits the other antenna. For me, it works as a switch, no hub. I want to confirm with everyone is 802.11n is still focused on the hub.

  Any input will be appreciated.

  Current wireless technology is still a network hub: when one speaks, all stops to listen and wait their turn.

• JavaScript: box always invalid after the page

  Hello
  
  In a region, I have a check box that must be disabled by default. After clicking on a button that applies a MRU/present (and verification of certain conditions) the box should switch to on.
  
  What I did:
  -The Javascript of the enableCheckbox() and disableCheckbox() functions are defined in the HTML page header (they work).
  -In the foot of the region with the box I call the function disableCheckbox ('myCheckbox'); to get the default value.
  -The optional URL redirection of the button says:
  JavaScript:doSubmit('SUBMIT'); to submit
  JavaScript:enableCheckbox('myCheckbox'); to activate the checkbox
  
  The problem is that the box will switch on, because submit/reload the page to disable the checkbox through the foot of the region. Think of other solutions, I realized that each top up will set the default again...
  
  How can that be resolved?
  Thanks in advance,
  
  Roger

  Hi Roger,

  You must have somewhere a logic that determines if the checkbox should be disabled/enabled.

  Generally speaking, it would be the value of one or more fields and the box should be checked whenever the field related (s) is / are updated using the onchange event.

  There are several ways to check for this, but the principles would be the same. For example:

  function check()
  {
   var x = document.getElementById("P1_PAGEITEM");
   var c = document.getElementById("P1_CHECKBOX");
   if (x.value == 'XXX')
   {
    c.disabled = false;
   }
   else
   {
    c.disabled = true;
   }
  }
  

  This function can be used on the page loading - by adding a call to it in Footer region region - and the attributes of the P1_PAGEITEM using:

  onchange="javascript:check();"
  

  Andy

• Is it possible to change the default transition always focus on the Cup?

  I'm from a different NLE, so this may sound weird, but I would like to than the first to always add default transitions focused on Cup - even when there is nothing compared to this clip. Currently, it always seems to add the transition at the beginning or at the end of the clip, if there is nothing compared to this clip.

  This default means that in the example below, a video (with clips on each side) and a title on (with nothing else on each side) currently do not apply the transition by default, which seems counterintuitive to me. Anyway I can fix this?

  

  Titles can have handles - by setting a 'in' anywhere in the clip.

  A title in Premiere Pro is an asset, but NOT a clip. Its a fixed Image x duration is repeated stills.

  He may not have handles.

  The Publisher handles this by adding executives of handle to cover the transition...

  Why would you want to generate "black handles? Which causes a break in the transition.

  There are hundreds of messages of new editors, you wonder why they get transition breaks - stock response is not "enough handles."  Follow-up by ' whats a handful? "

  There is no reason to artificially force empty tracks behave differently full tracks.

  Tracks of its nothing to do with the behavior of empty and full. His logic that you would not start a transition to half way through a clip without handles.

  If you are an experienced editor you can always return to A / B Roll style editing using 2 video tracks / layers (AB) to achieve what you want.  Sometimes, it's the best way as well.  First moved away from that there are years and not many know how to do these days.

• Name of the former service provider Internet always appears on the page titles and new or old ISP know how to change. How?

  I 'searched' former name ISP and search has no results.

  By "page title" are you referring to the blue banner at the top of Outlook Express or Internet Explorer?

  How can I remove the branding "provided by...". "in the OE title bar?
  http://www.insideoe.com/FAQs/how.htm#Debrand

  Remove IE/OE branding
  http://www.dougknox.com/utility/scripts_desc/unbrand.htm

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• set the focus to the area on the page to click on link

  How to set the focus of page on a particular line on the page based on a user clicks on a link in the menu. Example: the user clicks on the link in the menu 'contact' and the update page jumps to a line on the current page that has contact information. My site is versa - dol.com if you want to see exactly what I mean. Thanks in advance for any help...

  .oO (rimfirelive)

  > How do I set the focus of page to a particular line on the page after a user clicks a
  > the menu link. Example: the user clicks on the 'contact' menu link and the focus of the page
  > skip a line on the current page that has contact information. My site
  > is versa - dol.com if you want to see exactly what I mean. Thank you to
  > advance for any help...

  You can use a named anchor, or simply another page of contact.

  Micha

• Cursor does not focus on the newly created line.

  I use JDeveloper 11.1.1.4. Whenever I create a new line in the table of the adf, the cursor does not focus on new line. He always focuses on the last line that clicked before adding the new line.

  see that this can give some ideas

  Information about ADF: creating a new line and create update auto focus

• my logo and links continue to go to the page! can someone please?

  My logo and the links always moving around the page when I view the site with Internet explorer 8 and its okay when I watch with Safari.

  He sometimes happenss with all pages and sometimes not!

  Can anyone help solve this mystery. the site is www.zarproductions.com.au

  Thank you very much.

  Alex

  In a Word, yes although DW will do much of the heavy lifting for you.

  Edit > find & replace

  Find: all of the current Local Site

  Search: Specific tag > table

  Action: Remove attribute > height

  Replace everything.

  Rinse and repeat for the width and do the same thing for thetag.

  To style with CSS view

  http://www.Projectseven.com/Tutorials/CSS/css_td/

  Otherwise, forget the tables altogether (a few new sites Web use) and use an integrated model of the DW CSS-based.

  Or buy a rock solid template CSS online and learn the modern way of laying on the Web pages, for example http://www.projectseven.com/products/templates/index.htm (cost money, but they are great learning tools). I have no ties to them other than as a satisfied customer who learned of them.

• Text field element submits the page when you press ENTER

  My page has
  -a 'text field' point
  -a 'Send' button (and a related branch, which works correctly).
  
  Management is working properly, when I hear some data for field text Item.
  and I press the submit button.
  
  I would like to the text field do the same action,
  When I press ENTER,
  After completing a few data for the text field.
  
  Currently, this does not work, and I get the following message:
  
  "ERR-1777: Page 121 provided no page at junction."
  Report this error to the administrator of your application.
  Restart the Application.
  
  I also tried the "(always present when the page Enter Presseds) text field" setting
  for the parameter "display as" Item.
  
  You can try my page at:
  http://Apex.Oracle.com/pls/OTN/f?p=9218:121
  
  Thank you very much
  Marios

  PS

  Make sure that the unconditional branch has a sequence number greater than all other branches - Apex will use the first part, that it can find which corresponds to the current situation. I tend to use 999 for the sequence numbers of the unconditional branches.

  Andy

• Firefox always opens to the last used web page

  Firefox always opens to the last used web page. I tried the suggested solution (delete user. js the file of the profile folder) but cannot find such a file in the profile folder. Can you please help?

  What is your computer system and Firefox?

  Type of topic: preferences #general< enter > in the address bar.

  There are two settings;

  • At the start of Firefox

  When the browser is started, what you want
  view. Many of us choose view my homepage.

  • Homepage

  When a new page opens up, what do you want displayed.

  1. Use current Page. Use the pages that are never open at this time.
  2. Use the bookmark
  3. Restore by default. topic: Home shows a home page of Mozilla with tools.

  You can use one of these as you want;

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

• A small icon of 404 not found always appears at the bottom right of my screen everytime I open firefox, regardless the page I'll, it's still there in the same place

  I can go to either the page I like, but the little message is always that appear. He is just a paralilogram little 404 not found message whith and a strange server name.

  Thank you very much for your help, but I've uninstalled and reinstalled firefox and now it's over. I hope that it does not yet appear. If that's the case I'll follow your advice and post the things you said.

• When I open a new tab, I stay on the current page, even though I have changed my preferences to focus on the new tab.

  When I open a new tab, I stay on the current page, even though I have changed my preferences to focus on the new tab.

  You have this problem when running in Firefox SafeMode?
  http://support.Mozilla.com/en-us/KB/safe+mode
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

  You probably have an installed extension that has a conflict with another extension.