An ADT package fatal error, possibly caused by 4.12 Flex with 13 AIR SDK!

Similar Questions

• Fatal error VMware Fusion: (vmx) - something to do with "vmssPath."

  Fusion works very well, but I started getting the following error message when suspending or power off a particularly among my virtual machines (XP). There are no files in the directory of the virtual machine.

  Fatal error VMware Fusion: (vmx)

  Could not update the configuration file with vmssPath: cannot lock the file

  A log file is located in ' / Users/dslice/VMware_Fusion_Virtual_Machines/FSU-WinXPpro/FSU-XPpro.vmwarevm/vmware.log '.  Please request support and include the contents of the log file.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the Help menu.

  You can also run "/ Library/Application Support/VMware Fusion/vm - support.tool" directly.

  We will respond on the basis of your entitlement to support.

  My support of 30 days has long expired. Search the KB and all VMware for a produces no result.

  Any ideas, what is happening?

  In the future to enter the virtual machine 'repertoire' made a right click or ctrl - click it and select Show the contents of the package.  Merger creates virtual machines to act as a beam of Mac, but they are really a directory under the Finder smoke and mirrors.

• Fatal error fixing

  Fatal error is caused by problems with the computer's registry.

  Here's a solution:

  Click Start > run and type sfc/scannow, and then click OK.
  Note the space between the c and the /.
  You may need your Windows XP CD so that it is ready.
  If you have Service Pack 2 (SP2) or installed SP3, you will need the SP2 or SP3 version of the CD version. This can be done with a CD borrowed, if you do not.
  Allow the analysis to run, and once completed, restart the system.

  Information about SFC
  SFC gives an administrator the ability to scan all protected files to verify their versions and it will attempt to replace missing system files or damaged by the appropriate versions if she can find a valid copy on your hard drive. If it cannot find a copy on your hard drive will be asked to insert your Windows XP CD. You must have a valid copy of your revision of Windows service pack (SP) level to work properly. More information about the System File Checker can be found in the link below:
  http://support.Microsoft.com/kb/310747
  The option/scannow scans all immediately protected system files and replaces incorrect versions with appropriate Microsoft versions. This command may require access to the Windows installation source files.

  IF THE PROBLEM IS NOT SOLVED... IT's time to reformat your computer. After a fresh reformat, do not install any other software yet. Install HP printer... software it should work now.

  Please visit this link as well to the questions of the fatal error:

  http://support.HP.com/us-en/document/c02266980

• Fatal error when "Check Destination settings" _sourceStorageInfo is missing

  I am trying to capture a Dell PE2850 and get a fatal error during "Check Destination settings" in converter with installed on the machine itself or on another machine, make a capture remotely.  I have successfully captured other machines using the remote server mentioned above.

  SCSI: DELL PERC 4e/Di RAID creating a "disk" as "PERC LD 0 PERCRAID SCSI disk device ' with 2 volumes. (typical Dell 12gig OS + rest as d :))

  Network: Intel PRO/1000MT

  OS: 2K 3 R2 Standard with all current patches.

  I tried to delete the partition of diagnosis and no dice. There are errors in the log to not be able to read the discs, but all disks listed with errors that I can tell are the CDROM / DELL DRAC virtual CDROM / Virtual card floppy, etc.

  My goal is to capture this machine to the ESXi server running on a DELL P690 so I can install ESXi on this machine and move virtual machines back to her. From what I can tell I'm patched up to the latest version of ESXi on the P690 (I pushed for her update packages last week.)  Converter 4 build 146302.

  Any help would be appreciated thanks.

  Crudin,

  Welcome to the VMware Community Forums!

  I had seen something like this when there was a USB device listed as DISK0 in disk management.  It was precisely a Dell 2850, and the error occurs just before step 3 of the wizard.

  can you check and see if there is anything odd connected to this server or provide a screenshot of the overall management of the records of the 2850?

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Fatal error in Captivate 6

  Hello

  I have a problem with Captivate 6.

  I fell on "Fatal error", where the simulation gets crashed and may not reopen again. I tried all the available resolutions in the blog of Adobe and the internet, but has not solved the problem.

  
  

  I had created a project a few days back and it was workin fine until today. When I tried to open it, fatal error appeared. Since I am familiar with this fatal error a bit from my last experience with Captivate 5.5, I tried opening/creating a new project and again threw fatal error . Now, whatever project I try to open, have fatal error.
  

  Anyone any idea, why what is happening

  
  

  And here's my specifications:

  OS: Windows 7, 64 bit

  Processor: Intel Core2Duo 2.8 GHz

  RAM: 4 GB

  Hard disk: 148GB with 77 GB of available space.

  Urgent need for assistance. Have a deadline to meet.

  Soumya Hello,

  Welcome to the Adobe Forums.

  If you have not all specific settings for your projects in Adobe Captivate 6, try the following steps:

  (1) close Adobe Captivate 6

  (2) go to this location: C:\Users\user_name\AppData\Local\Adobe file

  (3) rename the folder 'Captivate 6' to '1234 '.

  (4) launch Captivate and try a simulation

  Thank you

  Vikram

• Error loading of ipa to appstore with the new sdk of air

  Hi everyone... I will resume my story:

  I got the "ERROR-ITMS-9000:"invalid Segment alignment. " This application has no alignment good segment and must be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need help. »

  and went to the https://forums.adobe.com/thread/1584796?start=0 & tstart = 0 but it is blocked and the victory download files take me nowhere... I tried with the AIR sdk beta (. 302) (it's beta when I tried) and the ipa sent to the appstore... now I have this error

  'ITC.apps.assetvalidation.PURPLE_EXECUTABLE_OUT_OF_ALIGNMENT.error.message '.

  What can I do? This https://dh8vjmvwgc27o.cloudfront.net/airsdk_ld64/archive_air_15.0_with_asc2_drm_sdk.zip will not download (says access denied)

  Well... it is now resolved! Don't know why because we did two things: tried the Beta SDK.349 and we are not sure that the person in charge downloads was submit the correct version as with the last itunes change he got a bit confusing... so if anyone finds this: try the SDK 302 again or 349 Beta... and try to present with apploader and not itunes conect

• Error packaging app [fatal error] SDK3.4: 1:1: content is not allowed in prolog

  I get this error when I package the application with the sdk3.4 from the command line.

  I know this is a mistake of the descriptor and the section InfoAdditions of xml parsing, but I don't really know how to solve.

  Someone?

  [exec] [Fatal error]: 1:1: content is not allowed in the prologue.

  [exec] java.io.IOException: generation PLIST failed because SAX error:org.xml.sax.SAXParseException: content is not allowed in the prologue.

  [exec] to com.adobe.air.Plist.newFromString (Plist.java:351)

  [exec] to com.adobe.air.Plist.newFromFile (Plist.java:325)

  [exec] to com.adobe.air.ipa.IPAOutputStream.setSDKVersion (IPAOutputStream.java:1067)

  [exec] to com.adobe.air.ipa.IPAOutputStream.setPlatformSDKLocation (IPAOutputStream.java:969)

  [exec] to com.adobe.air.ipa.IPAPackager.setDeviceSDKDirectory (IPAPackager.java:187)

  [exec] to com.adobe.air.ADT.parseFileAndPathArguments (ADT.java:1423)

  [exec] to com.adobe.air.ADT.parseDescriptorAndFileset (ADT.java:1474)

  [exec] to com.adobe.air.ADT.parseInput (ADT.java:929)

  [exec] to com.adobe.air.ADT.parsePackage (ADT.java:672)

  [exec] to com.adobe.air.ADT.parseArgsAndGo (ADT.java:570)

  [exec] to com.adobe.air.ADT.run (ADT.java:419)

  [exec] to com.adobe.air.ADT.main (ADT.java:469)

  We @Adobe are aware of this problem and that are currently studying. However, this issue is not blocking the ipa gets packed despite the error and works very well!

• Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
  My documents are 'hidden' also

  xpconfused,
  This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

  have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

  Hi MelbaIsaiah,

  I suggest you to follow the steps in the article and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

  I hope this helps.

• Device: usb fax modem; fatal error, what is the cause of the problem?

  using my usb modem-fax, the result is fatal error, the response of the device that I can't send your fax due to an unexpected error, pls help.

  I already installed and installed the device, remove and installed gain but the problem still there, pls help.tnx

  Duplicate the content of the Post-

  USB FAX MODEM FAIL TO PERFORM

  'THE FAX CANNOT BE SENT BECAUSE OF AN UNEXPECTED ERROR' IT IS THE MODEM ANSWER AFTER DIALING THE NUMBER, BUT BEFORE IT WAS OK, PLS TELL WHAT IS THE CAUSE OF THE PROBLEM AND TO SOLVE IT, TNX

  Hello

  
  1. What is the error code when printing / fax fails?
  
  2. What is the brand and model of Fax Modem?
  
  3. use an internal card for your fax and modem functions or an external modem?
  
  4. what was the recent change in hardware or software performed on the computer before the question?
  
  Please follow the links below to solve the problem.
  
  Method 1
  
  Check the compatibility of the device in the Windows 7 Compatibility Center.
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=fax%20modem%20&OS=32-bit
  
  Note: Check the categories of SOFTWARE and HARDWARE.
  Method 2
  
  Follow the links to help resolve the fax modem
  
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan
  
  Reference, the LEARN Section.
  
  Method 3
  
  Uninstall the program interface for Fax and reinstall it from the manufacturer's website.
  
  Run the uninstall program tool set up to help install questions.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Also follow the instrunctions from the link below.
   
  Solve fax problems

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

   

  Applies to Windows 7.
  I hope this helps.

• -0 fatal Error (s), 3 (s) - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: DW071: ERROR: DW003: third party useful Installer vcredist_x64.exe f

  -0 fatal Error (s), 3 (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: DW071:

  ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code:-2147024546

  For the steps, you can check out the link below:

  https://forums.Adobe.com/thread/1846551

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• DLL from the Windows API (user32.dll) causes a fatal error

  Hello
  On installation, we using a touch screen. LabView software is running in full-screen. I need to deactivage my Panel before if the screen saver is to warn the user start anyting. I use user32.dll SystemParametersInfoA and it works well, except, if I left the software. "myexe a fin a mistake and should be closed" (something like that my XP is in french).

  I have no issues in debug mode, this error happens in exe mode.

  I use LV 8.6.1. Do you have any idea why?

  Thank you

  CFiset wrote:

  Thanks, I'll take care of the details. But unfortunly, it does not.

  uint32_t SystemParametersInfoA (uint32_t SPI, uint32_t 0, uint32_t * value, False uint32_t);

  SPI = 114 = SPI_GETSCREENSAVERRUNNING

  If * value! = 0, screen saver, ON the other scresaver OFF

  Still have the fatal error of Windows.

  Thank you

  I noticed the node having a rather odd way of user32.dll on the initial load of the library call. You happen to have copied this DLL somewhere and SEO with full path to your VI?

  It is a very big NO-NO! User32.dll and several other Windows system dll weird for the system and are all bad behavioured if you try to load another copy elsewhere on the disk as the system directory. Just rename the user32.dll library only and let Windows choose the good DLL from the system directory.

  Another problem with specifying the full path to a copy of such a DLL, it of that LabVIEW you will think that you must have this built application-specific DLL and will include it in the build. However your user32.dll is almost 200% VERY incompatible to any other Windows system there, because of the Windows Service Pack version and upgrades of the correction of a bug, as well as different versions of Windows.

  Rolf Kalbermatter

• Package for errors IPA ADT with symbols for architecture arm64

  I use AIR Beta ADT command line 22 to try to build a simple test of IPA. I built a simple empty SWF using Flex 4.15, then tried-package. However, I get:

  Undefined symbols for arm64 architecture:

  "_CFStringLowercase", referenced from:

  _platform_LCMapString in libRuntimeHMAOT.arm - air.a (gsstring_osx.o)

  "_kCFBooleanFalse", referenced from:

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterZeroSymbol", referenced from:

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterNegativeSuffix", referenced from:

  _platform_set_numberformat_mode in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterPositivePrefix", referenced from:

  _platform_set_numberformat_mode in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_CFNumberCreate", referenced from:

  _internalSetNumberProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_CFNumberFormatterSetProperty", referenced from:

  _internalSetNumberProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  _internalSetStringProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterGroupingSize", referenced from:

  ...

  (more than 1000 lines)

  
  

  OSX using Xcode SDK 9.3 7.3/iOS 10.11.4,. I tried AIR SDK 21 and that of Flex 4.15 (AIR 20?), same result. I also tried to replace the AIR SDK, as described in other posts, no effect of ld64.
  

  Found, I just needed to simply use the correct platformsdk (iPhoneOS not iPhoneSimulator), ex:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneOS.platform/developer/SDKs/IPhO neOS.sdk

• Mobile Directory oracle to different physical devices causes a fatal error

  Hello

  I moved the folder integer oracle (in my case, it includes all oracle related files: directory of executables and 'oradata') to a different physical device. After mounting the new physical location even device of the directory, oracle starts but does not give me later ' ksedmp: internal or fatal error ' and ' ORA-00600: internal error code.

  (About the steps that I followed)

  -closing of the database (completely /etc/init.d/oracle stop - all processes have disappeared)

  -copy the directory structure (from / dev/hda1 to/dev/hdc1)-files at this location are identical after the copy

  -replace the/dev/hdc1 at the same place (/ home/oracle)

  -Start oracle

  -the DB starts and works of a great extend but trace and log alerts present FRAME of stack/trace dumps and unpleasant mistakes

  -Oracle version: 10.2.0

  I checked the size of the physical block on both devices (using/dev/hdc1 dumpe2fs | grep-i "s block") and it's different: 1024 on hda1 and hdc1 on 4096

  Issues related to the:

  -is the above mentioned block size the reason things don't work? If so, is there an easy solution?

  -If not, so what's the problem?

  -Yes, I know that I can export the entire database and re-import them on a different device, but thought I should be able to skip this step if I simply want to swap hard drives

  d ' other suggestions are welcome

  Thank you and best regards,

  Filip

  -to copy I used 'cp - r Pei source dest' - r is recursive is Pei o maintain the same permissions and ownership of files.

  I wouldn't be so sure that you reproduced successfully your devices. Are you using symbolic links? If so, that you converted symlinks to files they point out (source). You should be able to reproduce two complete directories using cp - av, however, I prefer to use the following, assuming that you mount the new drive under/mnt/hdc1 and that you want to copy everything under/U01, so you can later mount/dev/hdc1 under/U01:

  mkdir Pei/mnt/hdc1

  mount/dev/hdc1/mnt/hdc1

  CD/U01

  tar - cf-. | (cd/mnt/hdc1; tar - xf - sync)