Pavilion p6-2108: use of the high processor when refreshing or mode s/w

Similar Questions

• Use of the high memory when multiple tabs are open (and closed)

  When I open Firefox memory usage is around 70-100 MB RAM. When I work with Firefox I often open 15-20 tabs at once, then I close them and open others. Increaes of use up to 450-500 MB RAM memory. After the closing of tabs use decreases normally, but after some time. He begins to decrease very slowly and never returns to the level from the beginning. After a few hours Firefox uses about 400 MB of RAM, even if only one tab is open. First I thought it's because of my plugins (Firebug, Speed Dial, Adlock more) but I have checked and it is not. I reinstalled Firefox but the problem occurs as well. I don't know if this is normal. Could you help me, please?

  Hello

  Not an exact answer, but please see that. Article questions through various General situations that may or may not be applicable to specific cases, but could nevertheless be useful.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• Tuning for sql join key table no consumer of the heavy use of the query processor

  Obligation comes to tunne prod of the query in
  

  high use of the query processor

  sql_id: fp79wb32h7a6t

  Module: AHC, P_PatientDQ()

  Cost: 7

  Elapsed time: hung

  Status: Hung, 35,253,460 day at 30 minute intervals

  -Create table

  create table ahc. PATIENTVISITS

  (

  ahcid NUMBER,

  visitId NUMBER,

  visitstatus NVARCHAR2 (100),

  visitdate DATE,

  visitintime DATE,

  visitouttime DATE

  )

  -Create/recreate the index

  create indexes ahc. F1_PATIENTVISIT_AHCID on ahc. PATIENTVISITS (AHCID, VISITID);

  create indexes ahc. VISITDATE_IDX on ahc. PATIENTVISITS (TRUNC (VISITDATE));

  First total number of table

  Select count (1) of

  Pvs AHC.patientvisits

  -Save County 1387485

  create table ahc. PATIENTDEPENDENTVISITS

  (

  ahcid NUMBER (19) not null,

  IDPack NUMBER (10) not null,

  visitId NUMBER (19) not null,

  dependentvisitid NUMBER (19) not null,

  isdiabetic NUMBER (2)

  )

  -Create/recreate the index

  create indexes ahc. K1_PATIENTDEPENDENT_AHCID on ahc. PATIENTDEPENDENTVISITS (AHCID);

  Total number of second table

  Select count (1) of

  AHC.patientdependentvisits POS

  -Save County 774599

  Original request:

  SELECT count (*)

  ACH. PVS PATIENTVISITS

  WHERE PVS. VISITID IN (SELECT POS. DEPENDENTVISITID

  ACH. PATIENTDEPENDENTVISITS POS

  WHERE POS. AHCID = 37

  AND POS. VISITID = 218

  AND POS. ISDIABETIC = 0)

  AND SUPERIOR (PVS. VISITSTATUS) = 'PENDING'

  AND PVS. AHCID = 37

  Count (1)

  -----------

  1

  PL/sql Developer explain plan for the original query

  Owner of description Objects_name cost cardin bytes cpucost cost of e/s

  SELECT STATEMENT, GOAL = ALL_ROWS			7	1	41	63669	7
  AGGREGATION OF TRI				1	41
  SEMI OF THE NESTED LOOPS			7	1	41	63669	7
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTVISITS	4	1	25	33295	4
  INDEX RANGE SCAN	AHC	F1_PATIENTVISIT_AHCID	3	9		23164	3
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTDEPENDENTVISITS	3	1	16	30375	3
  INDEX RANGE SCAN	AHC	K1_PATIENTDEPENDENT_AHCID	2	14		18093	2

  After editing the query

  SELECT / * + FIRST_ROWS * / COUNT (1)

  ACH. PVS PATIENTVISITS

  JOIN THE AHC. PATIENTDEPENDENTVISITS POS ON PVS. VISITID = POS. DEPENDENTVISITID

  WHERE PVS. AHCID = POS. AHCID

  AND POS. AHCID = 37

  AND POS. VISITID = 218

  AND POS. ISDIABETIC = 0

  AND SUPERIOR (PVS. VISITSTATUS) = 'PENDING'

  Count (1)

  -----------

  1

  PL/sql Developer explain plan for change request

  Owner of description Objects_name cost cardin bytes cpucost cost of e/s

  SELECT STATEMENT, TARGET = TIP: FIRST_ROWS			7	1	41	59257	7
  AGGREGATION OF TRI				1	41
  NESTED LOOPS
  NESTED LOOPS			7	1	41	59257	7
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTDEPENDENTVISITS	4	1	16	36646	4
  INDEX RANGE SCAN	AHC	K1_PATIENTDEPENDENT_AHCID	3	14		24364	3
  INDEX RANGE SCAN	AHC	F1_PATIENTVISIT_AHCID	2	1		15293	2
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTVISITS	3	1	25	22611	3

  here after I changed the query no display cost = 7 io wait = improvement also 7 can someone please help these

  How to adjust or rewrite lots of join not keys to multiple records on table table

  Thank you

  VSM

  you have not answered my question. Are you really calling it 35 million times in 30 minutes?

  If so, why?

• service host: local service (small network) the use of the high drive

  Hello

  I reinstalled my laptop to avoid problems. Just after you have reinstalled windows, windows automatically updated install 3 updates. After windows update, service host: local service (small network) is frequently using the high use of the disc... Microsoft, U CREATE DEFECTIVE UPDATES...

  Specifications:

  Dell Inspiron 3421

  4 GB OF RAM

  HARD DRIVE 500 GB

  Processor Intel Core i5 3317u

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Pavilion 15-p101nm: using all the RAM

  I have 4 GB of RAM, 3.44 alone can be used by OS and etc, another 500 MB are RESERVED by GPU and CANNOT be used for other programs. When I check the properties and see "RAM installed," he said "4 GB (3.44 GB usable). Also when I run the Task Manager and look for physical use of Mem I see clearly that all usable memory is exactly 3.44 GB. So I want to somehow disable GPU on board and make all the usable memory, but do not know how... Actually I disabled it, but everything is still the same...

  You can't just. On AMD a series it's an APU... the video tracks integrated into the processor itself and the switchable dedicated card is based on the embedded video. So you can't just use 100% of the system memory for Windows tasks. Some will be used by the video system.

• Use of the high memory on Windows 7 without reason...

  Hello, I had recently a few problems with my computer after going on vacation for a week and turn it off.  When I got home my computer has had some problems of high memory use, I have no idea why.  I looked in my processes tab and it shows that Svchost.exe as the highest [150K] usage, but is not a lot to slow down computers.  Nothing else under it attracts a lot of use, I tried to disable my anti-virus [Norton] and it still didn't work.  All my drivers are up to date.

  Data sheet:
  
  
  Dell Inspiron 560 [2009]
  No upgrade graphics card
  64 bit
  Pentium Dual-Core CPU E5700 @ 3.00 GHz 3 .00GHz
  4.00 GB memory installed
  
  

  Hi Daniel,

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Scan your computer by using the Microsoft Security Scanner by clicking Download now to check if there is no virus:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  Optimize windows 7 for better performance:

  TP://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance HT

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• The use of the graphics processor

  Hi there, I hope you can help with this problem: during display table for the use of the cpu and the bottom shows it red when he goes on his use of 20%. What it means?

  There is an option to break the graph of CPU usage in two sections; time in kernel and user mode time mode. Many devices drivers and the essential elements of the operating system running in the kernel, so that the user-mode run in user mode. This option can be enabled by selecting the kernel schedules on the view menu. When this option is enabled on the chart to use CPU will show one green and one red zone. The red area is the amount of time spent in kernel mode, and the green area indicates the amount of time spent in user mode.

  Read also:

  Difference between the red and green CPU usage
  http://www.ehow.com/info_8567865_difference-red-green-CPU-usage.html

• Scchose.exe use of the high ram and RAM ghost.

  I recently updated my 12GB to 16GB ram then I noticed Svchost .exe raised usuage (389 848 KB) RAM, the process is bound to Wlansvc UxSms, TrkWks, SysMain, PcaSvc, Netman, hidserv, AudioEndpointBuilder. All with PID 1480.

  Also the use of the ram in the task manager must be wrong, since the use of the ram is not were close to 55% of total ram installed (8 GB).

  The system seems clean so scanned by McAfee and Windows Security Essentials.

  Well actually, after I done things as checked all disks and reinstalled the MacAfee and a few other drivers. Use you RAM has improved somewhat (30% off), since there is not much question now and running while trying to save the settings actually used resources more CPU and RAM I wanted (can not play LoL and slow navigation on IE). So I guess for now I'll put that aside until I have again RAM RAM (16 GB is maximum, you can get on a laptop I think).

  However I discovered that when I hit F8 and try to repair windows. It will slide in to bluescreen says unmountable_boot_volume... I guess I'm going to have to look into that one.

• Pavilion DM1 with Win8: illustrates the key commands when I type the letters.

  The problem is: when I type, for example, a K command "Devices" if poster or if I press the "Windows Help and Support" delete key appear the only way to stop him is to press the keys c and Windows, but it comes back in after typing about 6 keys. This makes the use of the keyboard almost imposible. In addition, I can't type a capital C when you use the button to the left.

  I tried to type high touchpad on left twice who stops him, a small light but I let go of the mouse.  I also did the thing about keys to sticky to ensure that was'nt on.

  The problem does not appear when I use a keyboard connected via usb.

  Any suggestions would be most welcome.

  It's time to replace the keyboard. If you have the warranty please ask HP.

• Pavilion DV6: Loud hum of the hard drive when burning CD

  Recently, I noticed that my laptop makes a fairly loud "buzzing" or "vibrant" sound. I encountered this problem recently when I tried to burn an audio CD. I've read about this problem on other forums of which most, explain that the cause could be due to the type of disc. I have this problem when I read from a disk. This problem could lead to the type of disc that I use?

  Hello:

  It has been my experience throughout my laptop and deskop PC DVD burners do the same racket when it burns CD / DVD, but not when it reads them as well.

  I don't think it's something to worry about.

  When burning a disc, a much more strain is placed on material that when reading a disc.

  I use Memorex or Verbatim quality disc too, and readers always sound as you said.

  One of the burners of my desktop PC is so loud, it begins to vibrate the case and I have to give him a rap on the side for the case of vibrate with the burner in the quiet.

• I get warned the high - processor use someone at - it ideas how to solve this problem

  I have a lot of space on my hard drive and Windows XP, 3g of memory.  I regularly get a protection against re using high CPU and everything stops.  I have to re-boot and sometimes even turn off and start again.  Any help would be greatly appreciated, but in plain English please.  Thanks in advance.

  Norton is a Devourer of resources well known. You'd be well advised of this gap and replace it with Microsoft Security Essentials or Avira Antivir (both free). Links:

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  http://www.Avira.com/en/Avira-free-antivirus

  Link to the Norton removal tool, which must be performed after having removed Norton via Control Panel Add / Remove Programs (and before installing MSE or Avira):

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

• Use of the high memory in Windows Vista

  I have a PC laptop Vista with 1 GB of RAM (I know I should get more!) that runs very slowly.

  The problem seems to be that the History graph to use physical memory in Task Manager shows continually near maxed out - usually 90% or more.

  No a process indicates an abnormally high consumption (SVCHost is the highest in 40 000 K with "show processes from all users' selected).

  I defragmented and run several scans of antimalware (analyzers Microsoft, Spybot, Malwarebytes, Superantispyware, etc.) and everything is displayed 100% clean.

  I've disabled Aero, transparency, the sidebar and disabled the services as Windows Search, Superfetch, Readyboost, and with little effect.

  I have run MSConfig and booted the system with everything off, and while the memory usage is a little lower, it is still very high.

  It's the analysis of PCPitstop which was done WITHOUT running programs other than Internet Explorer 7: "this system had a total memory load of 82% during the tests. This often indicates that more programs were running that could be managed by the RAM installed. »

  Here are the typical numbers in the Task Manager!

  (MB) physical

  Total 893

  452 cached

  Free 0

  (Mo) of core memory

  Total 240

  Paginated 188

  Paged 52

  System

  Handles 19405

  Threads 821

  Process of 72

  Page 1024M file / 2915M

  Physical memory 94%

  11% CPU utilization

  Here are the specs:

  Internet EXPLORER 7.0 browser

  System operating system Windows Vista Home Premium SP2

  Description of processor AMD Turion 64 X 2 Mobile Technology TL-60

  Number of processors 2

  Processor clock speed 2000 Mhz

  Description of the graph ATI Radeon X 1200 series

  Configuration of the memory 512 + 512; Unknown DIMM synchronous

  I would be very grateful for your suggestions!

  DG

  Darryl Gittins

  Vista is a memory hog. As you noted, you don't have enough RAM and he's never going to run smoothly with only 1 GB. Increase of at least 2 GB. You can also run the free process monitor utility to see what is eating your processor cycles.

  http://www.Microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• What is the best way to manage the use of the XP processor and backup storage?

  I have a three year old computer, I use a lot of disk space and burn the DVD for backup storage. I am a heavy user of CPU too. How do you recommend that I improve it? Thank you

  * original title - my Windows XP storage... *.

  Hmmmmmm!

  "I use a lot of disk space" - remove all the files that you do not need, does not store things that you don't use often. Delete unwanted files, i.e. run diskcleanup for example.

  "burn the DVD for storage of backup" - If you have USB2 then consider getting an external USB2 hard drive. Its easy to set up as and when necessary and is easy to copy/backup information to.

  Indeed, consider laying a HD internal or (easier) a USB2 external hard drive for storage from day to day, not just a backup.

  "I am a heavy user of CPU too" - its sometimes possible to upgrade your processor one installed initially, but it will depend on your type/brand/model of PC. Sometimes possible, sometimes it isn't. But it is usually at best a stop gap.

  If you have any free ram slots, additional ram stick in (get the right type for your PC) that can help speed up actions for certain tasks. If you play games and you have a "graphics card", level it as well.

  Best of all, is to consider a replacement PC. If you are really short on HD and have a very slow motherboard or CPU, long term on a new PC is probably going to be the best.

  Not sure if this is the type of information you were after? If it is not coming back.

• Use of the high - standby.exe and imageres.dll

  Hello

  I recently had problems with my laptop 64 bit Windows 7 is slow due to the use of 100% hard drive. By looking at the resource monitor I see that the Standby.exe image access frequently imageres.dll reading rates high when this is the case. Is - this usual?

  Any help would be appreciated!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Updated 4 question? : the use of the graphics processor shows 60% CPU, but inside the VM Task Manager shows 3-10%

  Hey guys...

  Hoping that someone else noticed this. I have a host that is running with a release of U4 freshly updated three virtual machines running. One of the three shows a CPU usage abnormal on customer VIM graphics, but when I'm sitting inside the virtual machine, the CPU usage is normal 3-10% with a bit high spikes every now and than. If anyone else has noticed something weird like that? I restarted the VM and the host and its always show this. VMware Tools are updated etc. His host W2K with 2vCPU and 3 GB of ram.

  Thank you!

  Each unique Windows 2000 multi proc machine I P2V would had this problem.  No exception.  The strange thing is that Windows 2000 VM built from scratch are very good.  Change the HAL to single proc will correct the problem, but if you really need and processors multiple (as we do) then the only option I found is to play with the advanced VM option 'monitor.idleLoopSpinUS '.  A value of 2000 is a good compromise for us.