An easy way to mass to fill the area SIP show name endpoints of TC?
I wonder if it is possible to find out the name of the view on an endpoint TC since TMS or name of the existing system of the unit?
I'm changing my environment to call using a name instead of a SIP URI (which are all [email protected] / * / in our network). If I put a name on a unit that it works, but in its current form, it would mean connecting more than 100 units. If I could put via TMS, or tell him to fill in the name of the system, it would solve my problem.
TC6.3 and 7.1, TMS 14.3.2 and VCS 7.2.
Thanks :)
Hi Nick,
You can easily set up a model of configuration in TMS to push the same display name to all of your endpoints, but models do not support a variable part. I don't think that the TMS can help you achieve what you want.
If I had thousands of endpoints, I would consider to write a shell script which connected to each other via SSH to deliver a 'SIP profile DisplayName xconfiguration' command, but when you have only 100? Probably not, as the written script is likely to take more than SSHing in there manually...
Kind regards
Kjetil
Tags: Cisco Support
Similar Questions
-
Does anyone know of an easy way to download images from the Olympus E - M10 12 of Photoshop, or how to export images uploaded using Olympus Viewer 3 to 12 of Photoshop?
Photoshop elements 12 can use the 8.5 camera raw plugin, which should allow the Olympus E - M10 to open in 12 PES editor or be imported in the Organizer 12 PES.
Have you tried help > updates the editor of PES 12 to get camera raw 8.5?
-
Is there an easier way to find images of the iPad/iPhone?
Is there an easier way to find images of the iPad/iPhone?
When I sync my iPad or iPhone to my computer, it uses the Photos from Apple, which is terrible.
Example:
I turn and go up on iPad #1
I shoot B-Roll on iPhone (s)
I have download the XML from the first Clip.
But I already sync had the phone, the other images are already on my machine somewhere.
Here's how to find it now, but y at - it an EASIER WAY to get images from iPhone/iPad into a tray of images?
Heya, heya:
Have you tried to Capture of Image (Applications > Capture of Image)?
It's pretty simple. I usually just drag and drop the files I want.
If Apple never stops this utility, I think I'm going to cry!
Although it's _avant_ you synchronize.
-Warren
-
Every page on my site (not yet published) has a clear red color (maybe partially transparent red?) that fills the area within the margins. My wife was working on a page, when it happened - they only thing she could think of was that she might have hit the 'function' button and the ' key (immediately to the left of the "Enter" button). I've been playing with it and research online for the answer, but have failed so far. Any ideas? It's probably something CRAZY... stupid easy feeling. (=) Thanks for any help you can give!
Turn off network Overlay on the view menu.
-
Easy way to export and restore the virtual network editor in 10 workstation
I'm looking for an easy way back up and restore my settings of the virtual network Editor. I use Workstation 10.0.3 on Windows 7 64 bit and have several networks configured on different host machines. After Googling for the problem, I found the following:
-on a Linux host, the settings are stored in/etc/vmware/networking. However, I am not able to find the file in Windows. Source: http://serverfault.com/questions/535193/vmware-workstation-how-to-automate-or-script-changes-to-the-virtual-network-co
-on a Windows host, all parameters could be saved through export of certain keys in the registry. But these keys are at least partially unique on each host, and it would be a real pain to get the keys on each host individually. Source:
-vnetlib control should support a statement "-export" which creates a text file containing the necessary information. However if I try to run the command, as described in the link, no file is created on my machine. The command must be ' start/wait vnetlib.exe - export path_to_file' (I am running this command of in the workplace, of course installation directory). I also tried "vnetlib" - path_to_file to export, but that did not help either. I know that vnetlib works because I reinstalled successfully the vmx86 with vnetlib service - install. If also tried the vnetlib64.exe, but no luck. Source:
So is - someone of you knows how to solve my problem? I'm looking for a way to write a simple batch script that exports the settings without having to deal with the registry. My virtual network Editor loses its configuration from time to time and I don't want to set up everything by hand again.
Thanks in advance.
The instructions on my site still fit for WS 11
sanbarrow.com ~ Indexon a 64-bit host export settings like this
"C:\Program Files (x 86) \VMware\VMware" _-_ export f:\ws-networkbackup.txt
Note the syntax:
_ should be a space
-is not a unique dashboard but 2 x lessYou can import this backup again if you replace import export.
Use a commandprompt with high fees - (run as admin)The settings for the vmnetbridge service are stored in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetBridge
The VMware DHCP written in
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetDHCPThe NAT service written in
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMware NAT ServiceThe vmnetuserif service is required, but there is nothing to configure
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetuserifThere are also the vmnetadapterservice but there is nothing to configure
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetAdapter
Less important entries go to
\VMnetLib HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\VMware, Inc.Also note for DHCP and NAT conf files:
netmap.conf
vmnetdhcp.conf
vmnetdhcp. Leases
vmnetdhcp. Leases ~
vmnetnat - mac.txt
vmnetnat.conf
They can be found in C:\ProgramData\VMwareFor your reference, I have attached a dump of vnetlib64.exe and the registry for the service vmnetbridge
Ulli
-
Easier way to delete messages on the watch against one by one?
How can I easily remove all text messages on my watch against one by one and having to tap the Trash button each time?
Hello
There is currently no other way to delete messages in the Messages on Apple Watch application.
If you want Apple to consider adding a new feature to the application, you can suggest here:
-
Several list drop-down menu items to fill the area of separate text even. How can I do?
Acrobat x Pro, I have figured out how to create a dropdown menu with items that will populate a separate text box, but how do I get several menu items to fill the text box. For example. My menu has three items, cat, dog, mouse. I choose the cat and it appears in the separate text box (hooray). Then I choose "dog" in the same menu. I would like it to appear in the text box even my previous selection 'chat '. Is this possible? I am very new to JavaScript, any help would be greatly appreciated! Thank you
Change the last line:
getField("Text_field_1").value += "" + aQuotes [point];
-
Since I use photoshop CC I have not found a way to use the discreen function when you scan... help!
discreen function?
-
Is there an easy way to add arrows to the drop-down list for the style Accordion widget?
I am looking for a simple way to make a drop-down arrow on the Accordion widget. The arrow pointing down when it is open and point at the time down? See the attached screenshot example.
You can use an arrow to label image where with the normal state the image of the arrow must be different from the current state.
Thank you
Sanjit
-
Is there an Easy way to correct spelling in the search bar?
Hi, I have problem of coordination and by typing in trouble. It isn't so bad as long as I can fix my typing. Unfortunately, some applications make it difficult to select the correct place and fix my typing. For example, Firefox. If I click in the right place in the search box, Firefox selects the whole search expression and if I click again, he chooses the word in full, but it alternates between these and never chooses the specific place where I want to add a letter or remove the previous letter.
Is it possible to change this behavior?
41 on Mac Firefox.
Hmm, looks like what you describe the behavior of a double-click and triple-click, who select a word or phrase, respectively. Your timing of mouse can be such that Firefox thinks that your two clicks are a double-click instead of two simple clicks (and similarly with three clicks). I don't know if there is a fix in Firefox for this, however. Could test you this theory by spacing intentionally your clicks more far out?
-
Windows 7 64 bit
Firefox v. 6.0.2
Norton 360 v.5See here:
What happened to the status bar?
How can I go back to the old status bar?
See also this add-on:
Status-4-EvarThanks again
-
I have several duplicate images and that you must remove to free up space ago filed either by date or name, and I thought that maybe there was a SHOW duplicates file as in itones
Hello
You will not be able to find duplicate files and remove all automatically. You must locate and remove it manually.
There are several third-party programs that could help you find the duplicate on the computer files, and delete them. I suggest that you use your favorite search engine for these programs.
DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
See also: http://windows.microsoft.com/en-US/windows-vista/Eliminate-duplicate-files
-
Easy way to make sure of the proportions of the page in all screen sizes
I am new to Dreamweaver. I created a page with diapers for the first time. I understand how to get my photo layer to work properly. I did two layers of text on top of the image. I size the layers (in pixels), but on a single monitor sometimes very well (obviously one) that I created it), but on a bigger screen, text layers extend beyond the limits of the image in the layer below. I solved this problem with other web publishers using tables, but I would like to learn more about the approach of layers. This page, if a look would be useful. daily schedule
Thanks for your suggestions, you can give me.Before you work with layers, click here.
http://www.great-Web-sights.com/g_layerlaws.asp
You can find some interesting traps there.
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
=================="lifelonglearner" wrote in message
News:ebaofv$10A$1@forums. Macromedia.com...
> I am new to Dreamweaver. I created a page with layers for the first
> times.
> I understand how to get my photo layer to work properly. I have
> fact
> two layers of text on top of the image. I size the layers (in
(> pixels).
> but on a monitor, it's (obviously that I created it on).
> but on
> more screen text layers extend beyond the limits of the image
> in the
> layer below. I solved this problem with other web publishers using
> tables, but I would like to learn more about the approach of layers. Here's
> the
> page, if a look would be useful.
> http://www.bainbridge.wednet.edu/blakely/Staff/lmckenzi/schedule.html
>
> Thanks for your suggestions, you can give me.
> -
Fill the table with file names
What Miss me? I have alerts that should appear if it works and if it fails, but instead, it does nothing, I'm sure he can to create a table which consists of all the names of file to a folder. In the past, I had to enter all the values one time and some of these files have 200 + files it contains.
#target illustrator filltotesTempArr function filltotesTempArr() { var toteTemparray = new Array(toteTemps) var toteTempPath = Folder ("S:/Illustrator JS Palette/Direct Template Calls/Totes"); var allFiles = artPath.getFiles(order); var toteTemps if (allFiles.length > 0) { for (i=0;i<allFiles.length;i++) { toteTemps = toteTemps + app.open(allFiles[i] ) }//end for alert("Your array has the current values:" + toteTemps); }//end if else alert("Script to fill Totes Templates Array has failed"); }
Just try something like this:
function GetTempNames(){ var toteTempPath = Folder ("S:/Illustrator JS Palette/Direct Template Calls/Totes"); var toteTempFiles = toteTempPath.getFiles(); var namesArr = []; for(var i=0; i
-
How to fill the area of the bean with values from database
I have a box of bean shaped which act as last autocomplete, I want to fill it with dynamic values of database, any help will be appreciated.
http://Forms.PJC.Bean.over-blog.com/article-16369664.html "It is the example that I am"
Best regards.An example with the EMP table:
DECLARE cursor cur is select empno,ename from emp; BEGIN -- initialise the ComboBox twin values -- for c in cur loop if c.empno is not null then Set_Custom_Property('BL.BEAN',1,'ADD_TWIN',c.empno||','||c.ename); else Set_Custom_Property('BL.BEAN',1,'ADD_TWIN_NULL',c.empno||','||c.ename); end if ; end loop; Set_Custom_Property('BL.BEAN',1,'ADD_TWIN','[END_DATA]'); Set_Custom_Property('BL.BEAN',1,'SET_ALIGNMENT','right'); END;
François
Maybe you are looking for
-
I changed the password used to access my gmail account. Thunderbird still uses the old password to access the account. How can I change the password that is using Thunderbird. The last time this happened I ended up creating a new account to Thunderbi
-
Beware - IOS 9.3.1 throws all bookmarks in Safari!
My husband has just upgraded his iPad to 9.3.1 and all his Safari bookmarks were thrown. I was going to upgrade mine tonight, but no more. Is it possible to recover short of restoring the backup of previous IOS together?
-
HP h8 - 1280t: simple click does not
I use a HP h8 - 1280t Intel core i7, 3.62 GHz, mem 10 GB, 1 TB hdd, Win 7/64. I did a post on the Windows Forum on this issue and not help. I'm using the option click on my mouse, but in recent days the single click does not always work. Whenever I
-
Hi all I have worked with a channel with the String data type and fill in the values with a script. This channel is really big, there was more 4 000 000 values long a few times. It worked perfectly fine last week. When I tried to run my script today
-
How can I change the brightness on my o f my Inspiron one screen?
My Inspiron screen is SO bright. I can not find the command to change the brightness. Anyone know how?