Analyzing XML and data storage approach with OSB

Similar Questions

• iPhone Documents and data - storage files do not match

  My iPhone running iOS 9.2.1 6 is showing the storage capacity almost complete when I sync via iTunes on my iMac. It shows (mostly music) data and applications to 51 GB more not less Go 61 of "Documents and data.  And of course, on the iPhone itself under "settings > storage" it shows 112 GB used and only 1.8 GB free.   The problem is, the list of applications and their consumption of storage under this summary shows just the music, pictures and my apps with just the 51 GB total storage.  There is no sign of the 61 GB, nothing for me to remove.  I saw many other threads on this problem and have tried the solutions proposed, including the removal and reinstallation of my email accounts. Also did a reset of the phone together. Any other suggestions please? Thank you very much!

  Did you check the settings/general/storage & iCloud storage use/manage? If you tap the apps listed, you can see the data stored in the "Documents and data.

• Documents and data - storage leak (bug?)

  Hello

  iPhone 64 GB, ios 9.3.2 6s.

  The question is:

  Documents and data to develop up to 32 GB (what I saw), as seen on iTunes and the phone ran out of free space.

  This happens already months ago, I did not find any application causing it or either messages or e-mail account, I finally had to make full backup and restore via iTunes to purge this unknown space. I thought that behind me, but still, less than months then after full restore documents and data weight approximately 32GB, that's enough, before I restore once again, someone has an idea?

  I tried everything to locate the space of simple storage up to PhoneClean, safeeraser, iFunBox management screen, I have no idea what is causing this problem...

  also tried google the question, found only on the topics related to applications causing, but I already tried to remove all his apps manually one by one, which did not help

  We hope to get some intel.

  Thank you community

  Try to restore as new, not backup your backup is probably damaged. The fact that this has happened two times points to an application or system corruption in the backup. Then download apps you want from scratch. I had to do it myself in the past, unfortunately, no fun, I know.

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• problem with usbccgp.sys and mass storage drive with several partition

  I have a composite USB device with "LUN mass storage (partition) multiples" as one of the interface. When it binds to the usbccgp.sys windows speaks only to LUN0 so the other partition is not still appear. Is this a limitation with usbccgp.sys?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• update the text with xml, DDL data fields a selection of an identification number

  Hi guys,.

  It should be simple, but I can't seem to find a straight answer.  In short:

  The XML file contains the ID, name, location (so 3 extreme records in the example xml file)

  Form contains a dynamic drop-down list to allow the selection of ID and text fields to display the names of the partners and the location of this ID.  The setting of the drop-down list works fine, however I need to update the associated name and location if different from the other ID's fields are selected.  I guess I'll need some sort of event on the menu drop down update other fields with the name and location of the selected ID, but I don't know enough to have a stab at him.

  Please, please, please help, Im starting to pull my hair.

  James.

  Sorry, looking at him again I could have given a better description of what is happening.

  Have a look at this sample https://acrobat.com/#d=NO5o6NhPTQgSYu3SVoN7rQ and data to go with her https://acrobat.com/#d=jN * pRT4uGg05VU * sGWvjcA

  The thing I should have said and I guess that's your problem is the the Data property, I used in $data. Data.resolveNode (...) must match the item parent of the element of your event if xml looks like

  1

  name 1

  Location1

  It should be $data.events.resolveNode (...)

  Maybe I should have used "itemGroup var = $data.resolveNode ("events.event.» (()_eventId.value_===_«_«_+_xfa.event.change+_»_») "); "in this case, but I try and do the resolveNode go as low as possible.

  Concerning

  Bruce

• Windows 2003 ent with storage cluster 2 and 2 nodes attached with it. It is possible to have a quorum failover?

  The scenario is that I have 2 DC and DR site and 1 storage connected with 1 node on both sites. The thing I have to do is cluster between two nodes if 1 went nodes then another are toggled but can failover storage level could be done by assigning 1 GB Lun as Quorum in both storage in both sites. I already grouped both nodes as local quorum.1st what I've done is MNS cluster but it does not fit our scenario.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How can I use FNDLOAD for XML reports and data defnitions

  I program simultaneous registerd bound reports xml and data defnitions in instance of staging and managed to switch to DEV... After updating of this stage and when I download the details of DEV and transferred to the program only simultaneous scene I can download... Can we use the command FNDLOAD for definitions of data or the data model for the XML report, FNDLOAD used for the simultaneous program, he transferred only the details of the program at the same time.

  Hello

  Use XDOLoader.

  Note: 469585.1 - how to use XDOLoader?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=469585.1

  Kind regards
  Hussein

• data storage

  Hello

  I have a few questions about how to manage and store data.

  I am witing a calibration software where I need to display the chart with the probes.

  then table of current vs probe 10 times Ref then calculations such as average, sigma, then conversion and data storage.

  Using data from the previous program files, I have identified a type of format.

  I reproduced it as a cluster with cluster as table follows this im using as a temporary variable when acquiring and pending approval of the user.

  After that I'll have to move from cluster to a vi convert txt to be operated by another application.

  My question is:

  is it a good way cluster using rather vs. string table

  one is typed so much more easy don't make mistake affecting each measure and the data calculated in the right place

  but less if the cluster size has to change

  with an array of strings, change can be easier but it is easy to make the mistake of index and by placing it in the wrong cell

  What would you use?

  Best regards

  Tinnitus

  Attached cluster VI

  While I agree with Mark that by using the software OpenG is write a much easier configuration file (in fact you can use the variant to the ini cluster just write the table once), it seems you are actually asking how to store data, no?  In this case, the format of configuration file would seem inappropriate if you plot the data that you need another script to extract data from this format.  If you try to write data that the customer can extract, then the way you suggest (without having seen) is not unreasonable.  Have that said, you considered PDM.  There are plugins for playback of this format for several packages of data analysis (Igor, Matlab, Excel, etc.) and writing to the file in this format is child's play.  There were converters even in ascii as others have developed on this site (I have not really tested it).  Anyway, just a thought.

  Cheers, Matt

• path of the file to open data storage

  Hi all!

  Now I am using open data storage blocks, write data and data storage to store and retrieve data from result nearby. For the issue of file path, before I

  Set the path of data by double clicking on the block 'open data storage' and inserting the location of the file in the indicated place, and it worked!

  Now since I made a stand-alone application of this program and use it on other computers, the location of the file that I inserted in the block of open data storage is not

  no more valid in the other PC. So I modified my source code by connecting a 'journey of the current vi' to the node of the file path of the open instead of data storage block

  insert inside the block and this does not work! During the race he displays an error in the data writing block saying that the refnum of storage is not valid!

  I wonder why I couldn't specify the path of the file like this. Kind to allow me to specify the path of the file in the path of the vi?

  Thank you!

  Chao

  You need to account for that path changes when integre integrated application, take a look at this example.

  https://decibel.NI.com/content/docs/doc-4212

• Documents and data with all the storage on iPhone

  A few days ago I tried to send an email with a large attachment. However, it has not been send so I deleted my account from my iPhone. Once I did, I got a message saying that almost all of my storage has been exhausted. I checked to see and I have about 5 GB of available 64 GB. I connected my iPhone to my computer to check which took all this space and 45 GB of my space is being taken up by the Documents and data. I deleted the old messages, imported pictures to my computer and erased, erase my history on safari, check on iCloud, and allows to remove most of my apps that I have read that the removing applications and later re - download. I've also updated to iOS 9.3. It helped very little. Documents and data is now only 43 GB instead of 45 GB. Before that happened, I got about 50 GB of free and now I just 5 GB free after it happened.

  What else can I do to clear more of Documents and data? Should I restore my iPhone to one of the backups that I recorded? Should I take my iPhone at the Apple Store because it happened so suddenly and randomly?

  On the phone, go to settings App > general > storage & use iCloud > manage storage (in STORAGE). Who will provide a list of what applications use data and in what quantity. Tapping on the app with you give the amount of data, the application contains (less himself) and in most cases the ability to delete the application, if you wish. You will not necessarily have to delete the app.

  Once you have completed all the actions, try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, actually iTunes sync erases some of this possibility.

  One last thing, if you have installed whatsapp, there is a known problem cases that it runs in fairly large amount of data storage.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• CreateResource and CreateSchema, big XML and XSD with plsql...

  Hello
  
  I am new to XML... but I feel really stuck!
  We are in gr 10 2 using PLSQL (not java)
  
  We receive the XMLs files we can insert into a table (* all_my_xml * with 2 columns xmlName varchar2 (50), xml XMLTYPE).
  We can query XML data using SELECT (for example):
  Select t1.resourceId, t1.lastName, t1.firstname
  of sipmo_xml t
  *, xmltable ('* ' in passing t.xml.extract('WORKBENCH_PROJECT/Resources/*') *.
  path of resourceId varchar2 columns (20) "@resourceId".
  *, lastName varchar2 (70) path "@lastName."
  *, firstName varchar2 (70) path "@firstName."
  *) t1 *.
  WHERE xmlName = "myfilename.xml";
  
  Everything seems perfect, except that it is very slow when the XML is great.
  
  
  Some suggestions are on the registration of a schema...
  Here I'm stuck... because it is not clear in my mind (and my English is so poor that it is difficult to read all of the literature in English!)
  (I read the XML DB Developer's guide)
  
  I downloaded a (Stylus Studio) tools to build the XSD file.
  
  (1) will I load the file XSD in the same way that I load the XML in the all_my_xml with the XMLTYPE table?
  (2) I have CreateResource before CreateSchema?
  with createresource, it returns FALSE (I don't understand why):
  IF DBMS_XDB. CREATERESOURCE ("projet.xsd"
  + XMLTYPE (BFILENAME('XSD_DIR','projet.xsd'), NLS_CHARSET_ID ('AL32UTF8')) +.
  +)+
  THEN...
  
  and createSchema is only successfully created:
  DBMS_XMLSCHEMA. REGISTERSCHEMA)
  SCHEMAURL = > 'http://www.oracle.com/xsd/projet.xsd '.
  , SCHEMADOC = > BFILENAME ('XSD_DIR', 'projet.xsd')
  (, CSID = > NLS_CHARSET_ID ('AL32UTF8'));
  
  (3) do I write the XSD reference in the XML file?
  If Yes... because we receive XML files from another, we are not supposed to change...
  So, what is the command?
  
  (4) if I want to create an index on the XML file that is saved in an XMLTYPE at my table all_my_xml... (includes many different types of XMLs)
  > > Can I do?
  > > I feel I need to load only a SINGLE file xml in a table containing a column of XMLTYPE... correct?
  
  (5) there are many tutorials and examples I've seen, but it seems that we do not follow these!
  Can you say that our approach is not one that fits?
  
  (6) is there a tutorial or an example of code that is a XML data querying, linked to a schema?
  
  I undestand that this post is very long, with a lot of questions...
  but I hope that someone will be able to advise us and provide assistance.
  
  Thanks in advance,
  Olivier

  1) shall I load the XSD file in the same way that I load the XML in table all_my_xml with the XMLTYPE ? 
  
  2) Do I have to CreateResource before CreateSchema ? 
  

  Not necessary, you will need to present XML schema as an XMLType, CLOB, and BFILE object in order to move to registerSchema. In general, the XML schema cannot be hard coded in your SQL script due to the upper limit of 32 K in PL/SQL Script.

  with createresource, it returns FALSE (I dont understand why) :
  
  IF DBMS_XDB.CREATERESOURCE( 'projet.xsd'
  , XMLTYPE( BFILENAME('XSD_DIR','projet.xsd'), NLS_CHARSET_ID('AL32UTF8'))
  )
  

  Probably because you don't have permission to create a resource called "project.xsd". Try ' / public/project.xsd '.

  3) Do I have to write the reference of the XSD into the XML file ?
  

  No, you nee a benchmark for the URL schema, convention is that a form of URL. However we never access. The only time where it's important that they match, is if the document contains an attribute noNamespaceSchemaLocation or schemaLocation.

  4) If I want to create a index on the XML saved as a XMLTYPE into my table all_my_xml ... (that includes many different type of XMLs) Can I do that ?
  

  Yes there are a lot of examples. If XML schema is complex with several nested collections, you will need to use a VARRAY according to storage model to get performance and indexing. There are examples in the forum. Look for the terms VARRAY or STORE AS TABLE to find examples

  I have the impression that I should load only ONE xml file into a table with one column XMLTYPE ... correct ?
  

  Incorrect answer. You can store many documents in the table. Each document will become a line

  6) Is there a tutorial or example of code that is querying data of a XML, linked to a schema ?
  

  Does not change the syntax.

• How to analyze all the data of the particular tag in the xml file

  Hi all

  I have a xml file, who like tags, code, rev_num, type... volunteers. I want to analyze the XML and save all data (code, rev_num...) the unknown tag in a text file. I tried to use a node matching vi, but I do not get the output I have need.attach is my attempt, can someone suggest me or help out me. (Sorry Cant join the XML so I recorded it in a text file.)

  Thank you

  Ankit G

  You must replace the instance of "resource" with "resource [type = 'unknown']." Did you do it?

• I want to buy a flash with lightning connector data storage.

  I want to buy a flash with lightning connector data storage.

  I'm between Transcend JetDrive™ Go 500 and iXpand SanDisk Flash Drive.

  What do you suggest me? Do you have another?

  My first priority is speed and iOS app use of data transfer.

  Hello

  To get the advice of a large sample of existing users of each product, you could more usefully read ratings on Amazon.com and reviews of products.

  If your questions are not answered there, you can also post a question of your choice.