And button grid problem Modal secondary Page

Similar Questions

• PSC 950xi and Windows 7 problem: not all pages are printed

  This problem has been reported by other at least 2 x in the past, go back for 2010, but there is no satisfactory solution that worked for everyone.  A real difficulty should not be available now?

  My PSC 950xi printer works perfectly with Windows XP.  Then I got a new laptop with Windows 7 and the 'good' HP driver has been installed automatically, as described in your Web site.  But now most of my impressions are incomplete; only the first part of the document is printed, and the last printed page is reduced by half.  Sometimes nothing prints. "Error" appears in the print queue, and I have to cancel the document to even try another impression (which then often does not work). I tried reinstalling my driver, as explained by HP, but without success

  A user suggested defining the "printer" HPCPP118 (RAW data type) processor (printer properties > advanced > Print Processor).  It worked for him.  However, it is not possible for me (and at least one other user) because the only available print processor is winprint.

  I hope you can help.   PSC 950 is not on the list of printers HP can't stand not (at least not on the list I've seen online)

  It seems to have solved the problem (1) Control Panel/hardware and Sound/display devices and printers, then right clicking on my printing device and select remove device. T (2) with printer, I unplugged my USB connector and then plugged back in and Windows 7 found the right printer driver automatically. (3) I had to wait a period of time (less than a minute) for the printer (re) - added to appear as the device by default and with the right image. (4) I never chose "Add printer" at all; Windows 7 was able to add a new when the USB connector is connected.

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth

• My mozilla recently opened emails see the problem of loading pages and emails in the Inbox are not open and other email folders also not load

  recently I downloaded many video converter software. After that whenever I open my emails, I'm not able to load the pages. Only, he opens the Inbox and when I click on any mail in the Inbox, it opens the mail and immediately which automatically closes a few seconds and not be able to display messages. It displays also error message on top a second (e.g. loading problem) same error message appears when I try to open any other folder as spam, etc. in e-mail and project files does not open and only inbox is up but not able to open e-mail messages. Is the same with all the photo files or those things accessible through google search, never, it opens and opens like email, closes immediately. I tried deleting and reinstalling mozilla, but the problem still persists.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• CC cleaner has changed the layout, button, the images do not with txt but below, some pages also do not now intertactive... can not scroll and buttons, and then click to activate the choice. Help

  Hi, please help.

  I currently use v4.0.1 Firefox, I love and I'm happy, because it allows me to use my Kaspersky link filter and the virtual keyboard.

  In any case, I recently decided to clean my registry and history using cc cleaner... I don't back upwards as I had never experienced problems before. Once cc cleaner had finished and I opened Firefox I noticed that my two homepage layouts changed. Supanet homepage is now all disjointed, the buttons are scattered to the left and to the right of the page, where once what they where side by side, all the images and the text seem to be under the other and instead of a single page, now, I have to scroll down and down to the full page all the text and image seem to be left margin.
  On the homepage of google some buttons are there, but the text inside has disappeared, even if the buttons work, a job search online via google... (or Supanet homepage) is not a problem, however, once we arrive on the site it almost shows the information the same page the hompage of Supanet way. Even more on some buttons on other sites are more interactive... for example, Asda good print. I do not wish to update to the other version of firefox that I would lose keys Kaspersky... so please help... I tried everything... same re install version 4.0.1.Help, I now there should be simple... but I'm not a geek! Thank you very much!

  There are a few variations on the command to start the Profile Manager, see if it works better than the one you used.

  Try typing firefox.exe Pei in the area run.

  Make sure you have a space between exe and the dash preceding the capital P and without the quotes with this version of the command.

• Problem with button 'customize your new tab page.

  I like to keep my empty new tab page, but there is one thing that bothers me. It's the button 'Customize your new tab page' in the upper right corner. Is there a way to get rid of him?

  Yes, it is possible up to 40 Firefox
  Follow the instructions in this article to support.

  Note
  The pref browser.newtab.url does more than 41 of Firefox.

  This is for security reasons: too many modules and malware use this feature to set their own new tab URL.

  Then, you can use this add-on: new tab override.
  When the add-in is installed, open about: config, find pref [email protected] and change the value to the desired URL.

  More details about this choice here: https://bugzilla.mozilla.org/show_bug.cgi?id=1118285

• In the forum Coursera pages there are different icons and buttons, but I see that only holders of palce, small squares with letters in there. Any help?

  In the pages of the coursera.org forum, there are different icons and buttons. They do not display correctly. I can see only tiny forms square with characters in them. Hovering on them can display information in some cases, but it is not very convenient. Although they recommend Firefox, I use Chrome instead. Chrome has no questions here so far. Is it possible to view these icons correctly?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• My games freeze and I have to refresh the page, windows network detects problems with pakage 1.0

  Windows network diagnostics detects connectivity with windows version 1.0 package! IAM helpless! My games freeze and I have to keep refreshing page and its helppppppp frustrating!

  Hello

  Thanks for asking!

  1. what game are you talking about?

  2. are - what you're talking to online games?

  3 have there been recent changes to the system before the show?

  If you are referring to online games, I suggest to follow the link and follow the steps. Check if it helps.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Reply back with the results. I'd be happy to help you.

• Hello, I get the beginning of the muse of adobe are the error message that the adobe application manager is damaged or not installed now, I downloaded 2 times and installed the problem persists, however, can me someone here with a rat page

  Hello

  I get the beginning of the muse of adobe, the error that the application manager adobe is damaged or not installed

  Now, I downloaded 2 times and installed the problem remains, however

  can someone here with rat page

  Kindly try to remove Adobe Application Manager to help cleaning tool and remove CC help | Uninstall the creative desktop application Cloud can download and install Adobe Creative Cloud apps.

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/

• Merger of option buttons that are on separate pages and contained in the same subform

  My question can best be described as follows:

  1. I have a two page (form) document... PAGE A and PAGE B, which are considered as subforms.

  2 page A is set on "flowed - high to low" and has a total of 4 pages when rendered.

  3 A page PAGE 1 contains a group of buttons radio Page 2 contains also a group of radio buttons that should be part of the radio group on page 1, but due to the design running to a second page, it does not.

  4. in view of the foregoing, I am looking for a way to "merge" the games of buttons two radio one, while they remain on separate pages. I know you can merge the Group of exclusive radio buttons that are on the SAME page, but I did not understand how to proceed when they reside on different pages. At first, I was able to do work by giving the two groups of radio the same name and the same parameter of overall liaison, but it became a question with question #5 below.

  5 PAGE also has an ' Add' button which creates a new instance of A PAGE, when you press on. Having the option button global value binding, it automatically value groups radio every time that a new instance of the subform is/has been created... who must be provided.

  The question now is... is there a way to separate radio button group merge two that are on separate pages and they have still work properly as new instances of the subform are created?

  You can probably achieve this by writing script...

  If you want to exclude two radio buttons that are on separate pages:

  (1) change them boxes. and bottom of properties...

  Appearance: Solid circle

  Check the Style: Circle.

  In this way they looks like you are using a radio button.

  (2) write the script to the Click event of the checkbox to disable the check box on the second page.

  Page2.CheckBox2.RawValue = 0; (Or what ever you want when it is not checked.

  (3) Similarly, write code in the Click event of the checkbox in the second page.

  Page1.CheckBox1.RawValue = 0; (Or what ever you want when it is not checked.

  (4) write the code below in the initialization event of each check box, as below...

  The Initialize event Page1.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page2.CheckBox2.RawValue = 0;

  }

  The Initialize event Page2.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page1.CheckBox1.RawValue = 0;

  }

  Thank you

  Srini

• Put in page works with IE and Firefox, different problems with the iPhone and Blackberry

  I created a website using DW CS4 www.hollisterairshow.com . When using my PC WinXp/IE and Firefox without problems occur in the page layout. However, I have a couple of users who have reported problems when you view the web site by using their smartphones.

  An iPhone user said the second line of the section containing the flag / date / flag is not centered, but left-aligned, everything is fine.

  A Blackberry user indicates the second line of the topic is properly aligned, but the menu bar that must appear on the left is missing!

  I don't have an iPhone or Blackberry, is it possible that I can test this using my PC? Does anyone have an idea what could be causing these issues?

  Thank you

  Tony

  I agree with the previous poster here.  I think that the best response to this is to create a separate site for mobile users, which is called case of detection.  It will be thought to create a site that is optimal in both environments.

  Shane

  DomainShane

• Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

  Hello recently, I logged on to my computer and found out that my laser mouse does not shine by the sensor and the pointer didn't budge when I moved the mouse wheel works only the buttons and scroll

  Why what happened?

  wheel scrolling and buttons on my mouse works nothing else don't

  EDIT: im using a basic v2.0 mouse Microsoft Optical

  Nope it na no:(mais c'est correct, je pense que c'est un problème matériel et j'ai acheté une nouvelle souris qui fonctionne très bien)

  but thanks for your help when even :) as I'm not sure how this forum works, but I think a mod should close this question

• Modal Plugin Page showing the blank Page.

  Hi all
  I use modal Skillbuilder page 2.0 4.2 APEX.
  Whenever I open the modal page, blank page opens.
  
  Can someone guide me what could be the problem.
  
  To open the modal page, I did the following steps.
  1 installed the Plugin 2.0
  2. from parent page, I created a button. Set the action to "defined by the dynamic Action. (I also tried to set the id of the button = "CREAT_BUTTON", a dynamic action with jQuery selector etc., as shown in the example video. "But this does not also).
  3 created dynamic action on click, mentioned the button and gave the path of the new page opens.
  4. change make up the Setup for the plugin and set the theme 1.

  Please see my earlier post-
  Your 'integrate in executives' is set to 'Deny', under Edit Application Properties-> security-> security of the browser.
  I put it on "Allow same origin".

  BTW, don't forget to mark the answer as correct!

• Modal plugin page

  Dear APEXers!
  
  I used a plug-in SkillBuilders Web site.
  
  This plug-in is on the modal popup Page.
  http://skillbuilders.com/webinars/Webinar.cfm/53?title=introducing%20SkillBuilders%20Modal%20page%20Plug-in
  
  It's work perfect like on the video.
  But I faced a problem.
  
  I tried to used modal page for sub form of table where I need to use the button with "Redirect to the page within that Application" instead of "Redirect to URL" like on the video.
  
  I used 'Redirect to the page in this Application' because I need to set the value of a first page within the value to the second page.
  
  In video showed that I can use the link in the column, but I did not report on the first page. So I decided to use the button to redirect to the second page of a value.

  Hello

  I tried to used modal page for sub form of table where I need to use the button with "Redirect to the page within that Application" instead of "redirect > to URL" like on the video.

  It seems that you are trying to define the Action of the button, if so, the action of the button must be: defined by the dynamic Action.

  To see how to pass values to other items please read this:
  http://www.Oracle-and-apex.com/Apex-URL-format/

  If the previous tips do not resolve your problem, then please reproduce your problem on apex.oracle.com and give us your credentials to fix it for you

  Best regards
  Fateh