Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

Similar Questions

• Satellite 5200 903: problems with Fn + F5 and button Middle YPP

  Hello
  I updated my Win XP Home for Win XP Pro and installed all the goodies of toshiba from the home page. Two things do not work as expected if:
  * Fn + F5 is not scroll the screens available
  * The YPP middle button cannot be used as a middle mouse button

  Don't know why Fn + F5 does not work, all other Fn keys work as expected. They show the OSD, too. FN + F5 does not display the OSD menu and no service :/

  The YPP button: I tried the driver on the site of toshiba and synpatics.com
  The problem is: in Control Panel, I can choose functions to each button. The "middle button" function is available for the left and the right key, but not the middle. And it is not recognized as button in the Middle, but like PageUp.

  Any ideas? The laptop is a Satellite 5200 903.

  Thanks for your help.

  Ataraxis

  Post edited by: ataraxis

  Hello Ataraxis

  First of all I must tell you that the Satellite 5200 is a great unit. If I found one that doesn't cost a lot of money, I will buy it.

  For your questions:

  As far as I know if you want to use the FN + F5 key combination you must install TOSHIBA Hotkey Utility for Display Devices V2.1.0.0 - 1. I hope that this tool is installed correctly. If you want you can try to install again.

  I'm not 100% sure but I think that this little button in the Middle does not have the same function as mouse button of the medium, as a dial and it will be used to start the Launcher of sPad. If you want you can check it in s. manuals I've read n t, but I hope you can find a good explanation about the features of this little button.

  Good luck!

• Problem with action dynamics and button

  Hello
  
  I have a form of muti-region I have operational by using the region view selector. On one of the areas I wanted to create a reset button, where some elements within this region may be reset by the user if they wish. I tried to create a button associated with a dynamic action (DA), but the app has complained to telling me that I had to have a button template that refers to #BUTTON_ID #. So I created a custom button template even though I don't know if I'm referencing the #BUTTON_ID # correctly. In addition, even if the button is onclick variety, when I click on it nothing doesn't seem occurs. Because I copied this model to another model of button, I noticed that there is an onclick reference in the template itself and I'm not clear whether still there or not. This onclick event references #LINK # which would theoretically take me somewhere else, so I don't think how it's Setup is correct. I have included the template button below.
  
  "< button value =" "#LABEL #" onclick = "#LINK # ' #BUTTON_ID # class ="grey button"type ="button">
  < span > #LABEL # </span >
  < / button >
  
  The OnClick event should be included in this model, or is DA already knows it's an onclick event so it's not necessary? The #BUTTON_ID parameter # referenced is correct in this model? Since I PLSQL code running via this button which told him to actually run this code? I looked at a few examples of custom button models used with DA, but they are few and far between. Any help on this would be greatly appreciated.
  
  Published by: apexguy on September 28, 2011 09:20

  Hello

  Try to add id button in the model of button as below:

  
  #LABEL #.
  

  Concerning
  Jean Claude

• + 011 phone calls indicating that I have serious problems with my computer and that they provide a service of Microsoft solve problems

  original title: + 011 phone calls

  I just got a phone call from + 011 indicating that I have serious problems with my computer and they provide a Microsoft service problems. It sounds like a crowded call center and they can tell me their name and they tried to set up a remote entry on my computer. That's when I hung up. Is - this legitimate because what it really looked like a trick.

  Not legitimate... do not answer the call... Mike Hall MVP - Windows Expert: consumer http://msmvps.com/blogs/mikehall/

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Anyone having problems with Windows 7 and the HP LaserJet P2035n?

  It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

  TechNet forums

• Problem with the Access toolbar buttons

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hello

  Those who are not traditional icons they are symbols that belong to the Segoe UI police.

  See the following Web site for an excellent tutorial to solve this problem.

  [SOLVED] Unknown character or vertical Rectangles are appearing in place of metro icons in the Windows 8 start screen and login screen - tweaking with Vishal:

  http://www.askvg.com/fix-unknown-characters-or-vertical-rectangles-are-showing-in-place-of-Metro-icons-in-Windows-8-start-screen-and-login-screen/

  Let us know if it works for you.

  Concerning

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• Problems with Office 2010 and Acrobat 8 Pro

  Good Day All;

  We are in the middle of upgrading Windows XP to Windows 7 with Office 2010 and I was wondering if there are problems with importing Office documents in Acrobat 8 Pro. I discovered that there is some problem with office 201 and designer of the life cycle.

  Any comments would be useful

  Concerning

  Chomp

  Acrobat 8 is not compatible with Microsoft Office 2010 and PDFMaker plugin is not installed. Only Acrobat X is compatible with Office 2010and at that time in 32-bit mode.

  Acrobat 8 is also not officially compatible with Windows 7, once again Acrobat X is the first version to include accreditation for this OS. It will still install, but Adobe cannot guarantee, it will work perfectly in all cases and does not provide any support for this combination installation.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...