andkmdap has stopped working and has recovered

Similar Questions

• Intel Graphics Media Accelerator Driver for Windows Vista has stopped working and was recovered successfully (on a Windows 7 OS).

  I have a Windows 7 operating system, but I have a "Intel Graphics Media Accelerator Driver" for Windows Vista, which constantly crashes, causing the computer screen go idle for a few seconds and with the message in the title of the question. Can someone tell me please where to get a driver Windows 7 for stands for the Windows Vista driver? In addition, please tell me how to get rid of Windows Vista driver

  See you soon.

  If the manufacturer of your PC's drivers Win7 installation will replace Vista driver

• Display driver has stopped working and has recovered - Inspiron 7359 2-in-1

  This happens several times a day, please see the error message in the screenshot-"ha stopped working and also recovered display driver.

  The strange thing is that she mentions Windows 8 when I have 10 Windows running on the machine. I also removed the display driver and installed from the dell support web site. Also updated the BIOS from the same place.

  

  Had the same problem with an XPS 15 9530, to the point where it drove me crazy. I can confirm that, for a few days it's been corrected by installing the beta driver for Intel. You must uninstall the driver from Device Manager Dell, reboot and then install the beta driver.

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• Display driver igfx has stopped working and recovered

  While playing the sims 3 the screen goes usually black then back to the game. then it goes black again and the game will continue once again, the screen is much darker. the darkness of the screen comes and goes and seems to pass the game of light to dark. Sometimes my computer just hangs. After I quit the game, a message appears saying: "display driver igfx has stopped working and recovered." What should I do to stop these pranks of the screen?

  Floop51,
  Take a look at this post: what to post in the forum games and then give us the details of your system and the operating system.   Given that this error is indicating your graphics card you can uninstall\reinstall the most recent driver.  Then clean restart your system and test.  Check the specifications of your video against the requirements of the game card.  If your card is at the very least, you may need to lower the resolution of the game.
  You can also check with the support of The Sims .
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Display driver has stopped working and has recovered

  This is my first post, so please bear with me. Also although I use pc a lot, I'm not technical interest. I have a laptop Compaq presario CQ61 64-bit Windows 7.  2 days ago the screen went suddenly "speckly" flickered then briefly became black. On forward "normal service resumed" but a message "display driver stopped working and got ' came then disappeared. I was watching BBCiplayer in time if this is useful. Since then, the problem has re occurred several times and I had to reboot a couple of times. I don't do any game at all, just browse some sites regularly then use Skype for an hour a day.  I thought everything was good today as the portable performed normally for a long time, then did it again! Can anyone help (in terms of simple fool) Please? Thank you very much

  An update conflict is possble.

  It is likely, too, that just reinstall the driver - if necessary update or just reinstall the current version - can solve this problem, if the software is at the origin of the problem.  Sometimes the drivers are dynamited by the updates and can be cured by be reinstalled after the fact.

  Good luck!  Post back with your results, if you like, and let us know how you fare.

• display driver has stopped working and recovered

  In my laptop, I get a message from the display driver has stopped working and my screen goes black and crash suddenly

  Details of my laptop are
  Compaq 620
  Windows 7 ultimate 32 bit
  Intel (r) Core (TM) 2 Duo CPU T6570 2.10 GHz
  Display map Mobile Intel(r) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
  Hitachi HTS545032B9A300 ATA Device driver
  Display Mobile PC screen 1366 * 768

  Help, please

  I would start by removing the current driver and installing the latest driver available.  (yours is 5 years old)
  

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• My safari has stopped working and will not charge

  My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

  Try to open Safari in safe mode.  Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible.  Hold down the SHIFT key while clicking on the Safari icon.  If Safari loading, the problem is related to the third-party extensions or plugins.

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

• Installer of Modules of Windows has stopped working and was closed

  Hello
  I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
  Help?
  Thank you!

  Greetings mollypopsicle,

  I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

  I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

  If you have a download manager, please use it to download the KB958623 update from this Web site

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

  Make sure you use the version of Windows Vista that applies to your system.

  Once the download is complete and before running the update

  1. Restart your system in safe mode with networking, as described in the above post from Brian.
  2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
  3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
  4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

  Here is a link on how to hide the update

  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

  Select only the I'm getting offered an update from Windows that I don't want.

  However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

  Thank you and continue to keep us informed of the State of this update.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• "Dell Support Center has stopped working and microsoft has closed the program in order to find a solution."

  Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?

  I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution

  It happens every 5 minutes but never comes up with a solution

  Hello

  Refer to this article and follow the steps to help solve this problem.
  Dell Support Center has stopped working error appears
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

• Why my 8 Adobe has stopped working and I am unable to download the latest updates?

  My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.

  The most recent version is Adobe reader X (10)

  I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".

  You could also try to reinstall Reader 8 and try once again an uninstall.

  If all else fails I try and install Reader X in any case if you have a corrupted version of the 8

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• manages scheduled tasks has stopped working and was closed

  Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

  And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

  FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

  How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

  Craig in New Jersey

  Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

  It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

  Craig in New Jersey

  Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.