Announcement: update the Configuration guide for RHEL v6/v7 with storage Dell PS Series available

Similar Questions

• Windows Media Center has stopped updating the lists Guide for Windows 7

  Windows 10 will go out the next Wednesday July 29, 2015. I have Windows 7 and I have technical problems with the Guide in Windows Media Center lists. This isn't updated Guide lists and I wonder if this problem is related to the upgrade of Windows 10?

  I called a technician to answer Microsoft desktop and the technician fixed my computer errors. Unfortunately, he could not fix this problem. Even though I always reset and auto update of listings in the Guide, the result will prove be the same with "no data."

  Windows Media Center has given me many error messages:

  Windows Media Center

  "Windows Media Center has corrected a problem with your registration data and will download the Guide even once. You should review your records to make sure they are always planned properly. »

  Failed to download

  "The new TV configuration data could not be downloaded. Existing data, if any, will be used as you continue by configuring the TV signal. »

  Downloadable guide is not available

  "Downloadable TV Program Guide listings are not available due to previous failures of download. For more information, right-click on the Windows Media Center system tray icon and open Windows Media Center update log. Select back to try again. You may be able to get the TV show lists, if they are available. »

  Guide download error

  "The Guide could not be downloaded. For more information, then Windows Media Center system tray icon right-click and open Windows Media Center update log. »

  I can watch TV on the computer using Windows Media Center and manually record TV shows, but it is difficult for me to record TV shows without ads Guide on Windows Media Center.

  Note to update (as of August 2, 2015):

  The Electronic Program Guide (EPG) for Windows Media Center Guide ads was already programmed by zap2it until July 21. After July 21, zap2it is no longer can update the lists Guide for Windows Media Center.

  July 23, Rovi Corporation's new Electronic Program Guide (EPG) for Windows Media Center Guide ads.

  From 23 July, listings in Windows Media Center Guide is running back to normal for Windows 7 users.

  My Guide Panel is equipped with a selector more [on the listings in the Guide] where is the expiration date. I hope that Microsoft does not support Windows 7 WMC.

  Please don't waste your time trying to solve the WMC, it is the expiration of the license that is causing the problem. I know it's frustrating.

  On the other hand, is - can anyone say with certainty that WMC is available on Windows 10? No charge for the upgrade to Windows 7?

  The way I see it, not providing the function of key in W7 WMC guide is motivation upgrading to W10, assuming that WMC is available.

  Hopefully Microsoft will give us the fix for WMC in W7.

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• What is "you want to update the password saved for"

  Given that I deleted prefs.js and user.js when I connect to any account in the upper-left appears
  "you want to update the password saved for" this interferes with the connection and now it won't let me connect you to your e-mail account.
  I wonder where it appears? I don't want to use it and want better to delete, but don't know how?
  I wanted to add a page in this issue, but as usual Firefox won't like that I guess. So, after this announcement I'll add.

  Thank you.

  Hello

  Thanks for the very useful reply.
  I followed the direction and it seems to work.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How mass update the display name for a group of existing emails?

  We were recently acquired and at the end of April will undergo a change of name of company official. Is there a way to mass update the display name for all or most of the emails without manual update of each individual file in the details by email? I know how to update the name of the company in the configuration > system management > company display settings > name of the company; However, this is only the default display name for e-mail messages that are created from that moment. It is not to update existing records, as I understand it. This will be a huge pain updates of each email for each existing campaign in the program generator, so if there is a solution, please let me know!

  sc * 2799241 * tr-j' thought that this might be the case. We will make do. Thanks for your reply.

• Export the configuration information for each group

  How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)

  By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information

  We have a utility to do this, or can we get this information using LCM?

  Any information about him will be useful

  Thank you

  The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app

  There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• I want to download the User Guide for the Apple TV user guide.  How can I do?

  I would like to download the User Guide for the generation of Apple TV User Guide 4.  Impossible to do on the Apple official site.  East - intentional; and if so, is there another way to download this User Guide?

  Hi you have this internet guide http://help.apple.com/appletv/

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• The user guide for Sonytv NSZ - GT1

  Is there someone out there who has a downloaded User Guide?  I found it online, but it has a lot of links.  We bought a floor model and the manual was not in the box.  If you can and are willing to help with PDF txt I sure would appreciate it.

  THX,

  Larry

  Hello Larry,.
  Welcome to the community of Sony.

  The user guide for the Sony Blu - ray Disc Player NSZ - GT1 Google TV-powered is not available in PDF format. However, the reference guide and the Quick Setup Guide for the unit is available for download in PDF format.

  Reference guide:
  http://www.docs.Sony.com/release/nszgt1.PDF

  Quick Installation Guide:
  http://www.docs.Sony.com/release/nszgt1_qs.PDF

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• and I can't update the photoshop lightroom for the DC version.

  Good night

  I am a subscriber of residence, photography Creative Cloud (annual) Plan, and I can't update the photoshop lightroom for the DC version.

  Thank you

  Carlos

  If you have the Plan of photography with LR 5, now and upgrade to LR CC and can not?

  Please explain in more detail:

  Are not able to see the button install next to Lightroom CC in the creative cloud desktop application, or do you think see this button, but when you click it you get an error, or you have installed LR CC but when you try to start it, nothing happens?

• Link on the installation guide for content Portlet Suite 11 g Release

  Hi all
  
  Anyone knows the link to get the installation guide for dissemination of content Portlet Suite 11 g.

  Hello

  I also had this problem initially, but in my case I had missed on the following steps:

  1.

  From a command line, run the WebLogic Scripting Tool (WLST), for example:

  WLS-HOME/as11r1wc/common/bin/wlst.sh

  Note:
  The script of WebLogic (WLST) tool is a script command line that you can use to create, manage, and monitor WebLogic Server domains. See the Oracle Fusion Middleware Oracle WebLogic Scripting Tool for more information.
  2.

  After initializing the script of WebLogic tool, type connect() and press ENTER.
  3.

  You are prompted to enter the user name, password and server URL Admin. Enter the following values and press ENTER.
  4.

  Once connected to the server, run the following command to register your WSDL:

  registerWSRPProducer('webcenter','Provide_Any_Name_for_WSDL_Handle','Your_WSDL>',timeout=500)

  For example:

  registerWSRPProducer (' webcenter', ' StellentWSRP ',' http://Host_Name:Port / SPC/portlets/wsrp1? ") WSDL ", timeout = 500)

  Referencing your content server

  WLST following controls should be used to create, delete and reset an Oracle Content Server connection:

  Note:
  Custom managed server on which CPS is deployed and the WLS_Spaces server must be restarted after you run the following commands to make the changes take effect.

  *

  Run the following command from WLST to create an Oracle Content Server connection:

  createJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'Content_Server_Host' = serverHost, serverPort = 'Content_Server_Port')

  For example (if the CPS application name is StellentPortlets):

  createJCRContentServerConnection ('StellentPortlets', 'CSConnection','192.0.2.250 = ', serverPort = ' 4444' serverHost, socketType = 'socket')

  *

  Run the following command from WLST to remove Oracle Content Server connection:

  deleteConnection (appName = 'CPS_Application_Name', name = 'CSConnection')

  *

  Run the following command from WLST to restore an existing Oracle Content Server connection:

  setJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'New_Content_Server_Host' = serverHost, serverPort = 'New_Content_Server_Port')

  *

  Run the following command from WLST to list existing Oracle Content Server connections:

  listJCRContentServerConnections (appName = 'CPS_Application_Name')

  See if you've too missed to follow the above mentioned steps and if so then fill to see if the problem still persists.

  Hope this helps

  Thank you
  Srinath