Another impossible to download episodes of your power supply problem...

Similar Questions

• Cannot download episodes of your workflow

  Hello

  I am now looking for a day in it. So I agreed I need help to establish it.

  I though I had all ready to download my podcast on iTunes. However, I get the following messages.

  -Cannot download episodes of your workflow.

  -Podcast work must be understood from 1400 x 1400 to 3000 x 3000 pixels, JPG or PNG, in the RGB color space and hosted on a server that allows HTTP HEAD requests.

  It's I checked out the site with two validation podcasting sites and they say its all is ok...

  My power supply is - http://feeds.feedburner.com/MikesOpenJournalPodcast

  I use blogger and feed burner - mikesopenjournalpodcast.blogspot.com

  Any help would be thank you very much

  Mike

  This isn't a stream, I'm afraid of podcast. You have no tag "enclosure" containing the URLS of your multimedia files, as required by iTunes. You have a reference in the 'Description' tag (which itunes does not read) to a URL of Google Drive which is a web page with an embedded player - it won't work. You must provide a direct link to the media file, and if you enter the URL in a browser it should play directly in a browser and no download or appear in an embedded player. And you will need to find another server to host your multimedia files - Google Drive caused nothing but bad and I'm not sure that someone has managed to do work for podcasting.

  As for the image, the URL in your "tag" leads to an image that is 320 x 320 px so as you can see he doesn't qualify.

  It may be useful to read my page 'help you get started' on podcasting: http://wilmut.uk/pc - I'm afraid at the moment you have is completely unsustainable.

• error iTunes cannot download episodes of your workflow.

  iTunes gives forllowing error when I try to add.

  Cannot download episodes of your workflow.

  The feed url is http://www.midmarket.org/feeds/midmarketradio/itunes

  Not sure why it can not download feeds. Can someone help me to solve it.

  Thank you.

  You have introduced a fatal error in your workflow that makes it unreadable. The first tag "description" in line 13 reads:

  < description > The Hub for Midsize Companies, sellers and Capital providers and influencers worldwide < / description >

  You can not have an ampersand ('& ') by itself in food as in XML, it means the beginning of a sequence of code. Since this is never done, it looks like RSS readers as if the rest of the food is the code. You need to replace it with either the word "and" or the code

  & amp;

  like you did in a number of other instances. I have not checked to see if there are any other loose ampersands in animal feed.

  There is another point that may well cause problems. Your enclosure tags only contain the URL of the media file. The need also to contain the 'length' and 'type' attribute, like this:

  < pregnant url = length of 'THE URL OF THE MEDIA FILE for the FULL EPISODE' = 'FILE SIZE in BYTES' type = 'for AN MP3 - audio/mpeg"/ >

  The attribute 'length' can not so important with the store, but the 'type' to recognize the file.

  In addition, your media files are hosted on Amazon and use the protocol https (secure connection). This is not recommended; If in each case, you change the https protocol to http, it should still work. There has been problems with the use of Amazon, so if you still have problems after you correct the two points above which would be the next place to look.

• Cannot download episodes from your stream

  Hello, I'm fighting this for many, many hours now.   I can't download my iTunes podcast because when I validate my RSS feeds, I get the error: "unable to download episodes of your workflow.

  I created 2 FLOW RSS, in two different places, and when I use power validators, they return without problems.   I don't know why iTunes won't accept it!

  The original: http://feeds.soundcloud.com/users/soundcloud:users:223621246 / sounds.rss

  Second: http://feeds.feedburner.com/MetalheadAsia

  I don't know what else to do here, I am a novice to the news FEED.

  There is a constant problem in Soundcloud and you have fallen on it, in common with a number of other posters. The URL of the media file from your top of the page of the episode is

  http://feeds.soundcloud.com/stream/261810590-Metalhead-Asia-episode-1.MP3

  This redirects to http://feeds-tmp.soundcloud.com/stream/261810590-metalhead-asia-episode-1.mp3

  When you enter the URL in a browser, others have seen an error message saying 403 Forbidden: request prohibited by administrative rules but you get nothing at all - maybe a change since yesterday. It's something that only Soundcloud can fix. Their status blog says there is a problem with the RSS, although with the audio file rather than the power supply is probably all part of the same problem.

• "Unable to download episodes of your workflow.

  I was handed a food that was installed by someone else in the past. I have most of the errors fixed (work fixed, fixed illegal characters in titles, etc.). But when I go to add the feed to the apple store in podcast, I get the error "unable to download episodes of your workflow. I searched through discussions and seemed most of the time, it was because of the invalid enclosure, but I checked and they seem fine download. Could someone take a look and provide feedback?

  http://feeds.feedburner.com/CalvaryNorthglenn

  The problem is that you have a mixture of episodes with boxes and episodes without. Your episode at the top of the page is not a forum, and it's the only one that is checked when you submit a stream. Because it is not a stream is rejected.

  It is not a good idea to mix the types of the episode in this way. The episodes that do not have fences do not appear in the store or a subscription. For now you seem to have Wordpress showing only 10 episodes in food, after which older, those are deleted (of course you can have only 10 so far). If you mix episodes and the number is limited, then very few episodes will appear in the store. You should be able to increase the number in the Wordpress settings that would work around this problem, but it is really better to have only playable episodes in a podcast feed. You can find that Wordpress has also produced a stream with only these podcast episodes, and if so you could argue that to Feedburner. Otherwise, you must remove the episode at the top of the page or your diet will not be accepted.

• Error message "unable to download episodes of your workflow.

  Here's my workflow, and an episode of my podcast appears on this subject: http://feeds.feedburner.com/WhatHappending

  However, when I try and submit my feed to the directory of iTunes it says "unable to download episodes from your workflow."

  When I manually to the file, Subscribe to the Podcast and submit URL, my shows stream but for some reason, the episodes don't. Could someone tell me where I'm wrong here?

  Thank you!

  Within each episode in a flow, there must be an "enclosure" tag that contains the URL of the media file for the episode. Your reads:

  length of http://whathappending.blogspot.com/2016/01/Episode-2-Felicity.html"="0"type =" text/html"/ >

  This URL is for a web page: it does not work. You must provide a direct link to the media file - .mp3 or something else - and the file should play directly in a browser when you enter the URL in the address bar, not force a download. If you send a file suitable for Blogger must build the feed properly. Allowed file types are file .mp3, .m4a, .m4v, .mov or .mp4 (not Windows Media, RealMedia, Flash or any kind of built-in player).

  Your media file is hosted on SoundCloud, so you'll need know how to access the file directly. There is a setting for the download and you must disable that.

• Continue to receive the error - cannot download episodes of your workflow

  Hello

  I'm using feed burner to add to create RSS feeds to add my

  ITunes podcast.

  But, when I add this feed - http://feeds.feedburner.com/wordpress/ueef

  I get the error message - unable to download episodes of your workflow.

  I want to connect Itunes to thisblog - where I'll post my future podcasts. At the moment I have a test post with a link to the

  file (which is hosted on an account of google reader with permissions to be available for anyone who wishes to

  Download or listen.

  I'm new pod casting and not really sure that I can do to solve this problem.

  Will be grateful for any assistance.

  Thanks in advance.

  There is no file at the URL you give to your Feedburner feed.

  The blog that link you has a link of RSS, but there is no media files. The episode on the blog page has a link to a media file to Google Reader, but it does not play and also the URL has no extension (for example, .mp3) so he won't have a podcast.

  Google Drive caused a lot of problems, and the indications are that he is not a suitable place to host a podcast.

  WordPress will build a podcast for you, but you must provide the URL of file media that are a direct link to the file, the extension and play in a browser, rather than forcing a download. I can't advise on the specific features of Wordpress, but they have a help page at https://en.support.wordpress.com/audio/podcasting/

  You can also find it useful to consult my page 'help you get started' on podcasting at http://wilmut.uk/pc

• Pavilion a6655f: hard drive or power supply problem?

  A few days ago, I was trying to low loading part of the steam.  My download speed is 30 kbs, obviously not good.

  I did some basic checks, malware, viruses, etc., but did not find any problem.  I did a diagnostic check and got a BIOHD-8 error code, which indicates a hard drive problem.  I decided to try to reset the computer back to the factory setting before changing the hard drive and once that I made and updated windows Vista for several hours, I restarted the diagnosis and he came clean.  Then I updated my software, including steam and a few games.  Downloads were fast and had no problems.  Later that night the computer started to shut down randomly, and I was unable to run any games.  Thinking it's maybe a power supply problem, I have replaced my graphics card with an elder who needs less energy.  I am able to run without any problems so far.  So, I'm looking for help in identifying my problem.  HDD problem, power supply, something else?  Any thoughts are appreciated.

  Pavilion a6655f

  Windows Vista

  PS 500 watts

  WD hard drive provided with the computer

  Thank you.

  Ken

  Hard to say without proper trials.

  You can use a hardware monitor HW Monitor to monitor tensions it is: http://www.cpuid.com/softwares/hwmonitor.html
  But there is no software that can test a power supply.

  You can get a tester of hardware like this too: http://www.newegg.com/Product/Produc...82E16899887005

  But there is really no of it will predict fails if the power supply, if you overloaded it, if its duration in time high, or if the power supply is a device of poor quality that can be subject to failure.

  You can also check that your power cable is comfortably installed on the computer and not frayed.  Try a different wall jack where there are fluctuations in power.

• Power Supply problem when installing Windows 7

  So I'll keep this short and to the point. I was upgraded yesterday from Vista to 7. Has made all the necessary updates and restart before installing 7. While it was installing, I weppe out of the room, came back and my monitor was empty... Silly me, I thought it was a reboot during installation. Futher glance, the monitor is in standby mode and the PC itself has been disabled. I waited about 10 minutes and it was always off. So I hit the power button, and it will not turn back. Tried the flipping of switches, different cables. Even called tech support, to get your warranty has expired and its $ 99 for me you tell the problem... Then he became the Lady on the line, telling me something I already knew... I got a power supply problem and I had to mapy 340.00 to repair... My question is this... It was just the stars lining up properly and my diet is to bite the dust while I have been upgraded or is there more behind it?

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• 3525 Deskjet printer power supply problem

  Brand new printer, I have been connected, printed OK. Once off, lights not again unless you pull on the power cord plug, then plug it in yet. Then can be turned on. But once off so the same problem all over again. I tried different plugs/Sockets, same problem with them all. Same thing happens when the printer is connected to the electric network without being connected to a laptop Desk/computer. Is this a power supply problem? Is it not ridiculous to do out of the box?

  Thanks for any help,

  Nicholas

  Hi Nicolas,.

  The latest firmware should solve the problem you are experiencing.

  Download and install the update of the firmware for your operating system below:

  32 bits:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128070-2&cc=us&DLC=en&LC=en&OS=4157&product=5241265&sw_lang=

  64 bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128071-2&cc=us&DLC=en&LC=en&OS=4158&product=5241265&sw_lang=

  If the printer connected to your PC via the wireless network and the update fails to install, connect the printer with a USB port in order to complete this update, or update your device from its screen as follows:

  http://support.HP.com/us-en/document/c03250770

  Kind regards

  Shlomi

• "Unable to download episodes of your flow" when you try to validate the Squarespace power

  Hi all

  We are moving our Church of Drupal 7 to 7 Squarespace site.  Today, I tried to post one of my feeds. However, the page connect Podcast throws me error of not be able to download episodes.

  I checked my xml, and 10 episodes all have valid links to .mp3 files in their enclosure tag. I even tried one of the URL of the file directly in a browser, and I can listen to the episode successfully, so I know that it is accessible.

  Here is the http://regeneration-church.squarespace.com/genesis?format=rss

  The Bank verifies that the high episode in your stream. Your high episode - as of January 1, 2025! n ' has no 'enclosure' tag than others do. As a result, the store complains that he cannot find a media file. I guess that this episode is a model? -in any case, you should remove it.

  None of your episodes have titles, so when you subscribe to iTunes media file name is displayed. It would be interesting that unravel.

• With Tecra750DVD power supply problem

  My laptop recently decided to refuse to turn on when I turned on. There is a yellow light in the position of "power" over the front of the machine, but it won't start. I tried all the options: Power Supply Unit only, only battery, Power Supply Unit + battery and nothing works. Fuse is good in the plug of power supply. Battery is less than 12 months.

  Hello

  You can remove the battery completely when problemshooting this kind of predicament.

  First of all - what impression the power button? Does it feel as it should? Refers to how it used to feel? If this is not the case, check if there is an active "lock" behind it.

  Some models have a safety lock to keep the machine from accidentally start in a bag or two.
  Please look at the LED that indicates that your adapter is connected. When you try to switch the machine on, what is happening with this LED? Always the same fixed green light or suddenly out or flashing?
  If out, please try to get your hands on another adapter (borrow prefferably). If it flashes then try to remove the AC adapter, remove any option that can be easily removed, CD/DVD, memory, expansion card PC and so on.
  Try to restart it (remember to join HQ again). Even? If Yes, then sorry to say I think that your machine needs service. If this isn't the case, then there could be hope.

  Disconnect the AC and put back in place the units that you have deleted before, one by one and after each unit, try to restart the machine.
  If it starts fine, remove the unit and reconnect the next unit. Perhaps you will find that there is a problem with an external device (memory, CD, PC Card and so on), then at least you can continue working more or less as before the problem.

  Good luck

  Tom

• On Satellite P100 power supply problem

  Hai
  I bought the new laptop Satellite P100. Suddenly it does not start (no power to notebook) and the same time, I have only checked by the only power a/c no result, also do not charge the battery. I put t know what is the reason. Can someone give suggestion?
  Thank you bye.

  If the power light is blinking there is probably a problem with the electronic power supply. In this case, the laptop sends flashes code. Read this code, technicians can identify the problem.
  Please, don't waste your time but the closest service provider contact allowed in your country.
  After 18 months of that guarantee must be valid (it depends of course on where you live) as well as the repair must be free.

• HPZ620Workstation and Evga Titan SCBlack POWER SUPPLY PROBLEM Edition

  Hello world

  I bought (Evga Titan SC Black Edition), but I have a problem with my power supply hpz620

  http://www.plugloadsolutions.com/psu_reports/HP_S10-800P1A_ECOS%202609_800W_Report.PDF

  I have two xeon processors (2 * 135W) and my question is the graphics card has enough power to do with the rest?

  Second problem is the molex cable I have only one. What is the best solution for me?

  Edition of black titan sc EVGA specification

  Performance

  NVIDIA GTX TITAN BLACK

  Hearts CUDA 2880

  967 MHz Base clock

  Boost 1072 MHz clock

  Memory

  6144 MB, 384-bit GDDR5

  7000 MHz (in force)

  336 Gbps of bandwidth

  Hello:

  You can also ask your question on the HP Business Support Forum - z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U4CnZ-lOW9I

• Strange on my Satellite A100 power supply problem

  Hi I hope it's just me in Sun.

  I plugged my power on my laptop today and found that no power is getting to the laptop. I checked all the obvious things like the fuse and have even tested the output of the power supply with a multimeter and I get what looks like the correct voltage.

  However, when the power supply is plugged into my laptop blue "alternating current" does not and windows wants to say I'm running out of battery.

  Someone else had this problem? It is a work of repair and return? (I hope really not).

  Thank you

  Doug

  > Is this a work of repair and return
  I'm afraid, m Yes :(

  But the question is; malfunction of what part?  :|
  Maybe that your inquiry is good and everything is ok with the AC adapter / CC.
  This means that there could be something wrong with the laptop itself.

  Maybe it's only one loses the connection between the plug and the motherboard or most serious problem as a malfunction electronics power?  :|

  Who knows. It of very difficult to say what's wrong without any diagnostic tests
  I recommend you contact a technician in your country. He could check the laptop and found much faster fault as a user simply ordinary like you and me.

  Good luck