Apex 5.0 - scrolling page builder

Similar Questions

• Create a page long scrolling pages with distinct url

  Hello all, I just finished rebuilding our site big enough in Muse.  We leave the square space and I was shocked when I learned about the lack of any kind of blog integrated.  I spent the last two days to play with the news FEED and Iframes but I can't all RSS widgets look pretty transparent and I need SEO for Iframes are out.  I have really no experience with the code so I'm at the point where I intend to build the blog in muse as any other page and just use muse to make blog posts, I assume that there are a few disadvantages that people could report?  We have enough long positions, but only a few of them so I don't mind the work, my real concern here is if it's going to hurt the site speed or anything.

  If this stupid idea is actually not as stupid as it is probably and I do actually my problem is the link to a specific blog (mainly for social media), I wonder if anyone has a way that I can make each publishes a page on my site and make my blog page a long scrolling page of these pages , there are some models of square space who seem to do that (is what makes me think it is something) I noticed on some models the URL would change as you scroll to the bottom of the page (square space called the Index pages, but I think that is not what an Index page, I don't know tho) I think anchor points may be the best solution , but if its possible to make each its own poster page it would help a LOT for organization and liaison.

  Please feel free to explain how my idea is bad and why, or better yet give me a impressive alliterative.

  Thanks in advance.

  -Steve

  Why Muse doesn't have Articles?

  I know in the case of Google's B i.e. gets analyzed, but added to the main site (say wordpress for example) and not the Muse which links to it.

  I beleave startpage has the score on the site of Muse, but it's been a while and they could have sold themselves to Google / Microsoft now.

  From the interface point of view user gives its all smooth and in the example of Mr. White , the blog is its website in any way... good luck with it mate.

• How can I disable the little hand that pulls (scrolls) pages?

  How can I disable the little hand that pulls (scrolls) pages?

  Hello

  Check the mouse applet in the control panel. Usually, cela lie on the device settings tab select device, click settings.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• scrolling page in QML

  I have a QML page with 20 keys inside. These 20 keys to take more space than available in a page 1280 pixels.

  Is it possible to make the scrolling page so that I can see all 20 icons by scrolling top down?

  ScrollView is your friend for this...

• When I scroll page left shift

  Hi I am a beginner using the Muse. I have a problem: when I scroll page left movements.

  I find that when I do either a Bureau site fixed width or fluid and if I click on the menu that points to a more low placed whiles scrolling content moves to the left.

  This phenomenon occurs when the browser window is smaller, but the pages still fits into and under the horizontal scroll bar is displayed.

  This phenomenon occurs with own Muse Starter models as well.

  What causes this problem? Is there a solution?

  Please let me know.

  Sincerely Pal Virág

  Hello Virág Pal,

  Could you please try to perform the steps in below two threads and I would like to know if one of them works.

  Adobe Muse page moves to the left

  The site drifting to the left when you browse with anchors

  Kind regards

  Ankush

• Frame scrolling page

  Can you do one side of your scrolling page? On the screenshot attached, I want to on the right side to scroll so you can display the text but keep the image on the left, as it is. Here is the Muse that I created - Dropbox file - Strattons.muse

  

  This would be a normal composition with two subgroups - with overflow to generate the scroll, the other with a fixed size.

  Mylenium

• I develop a site of scrolling page

  I develop a site of scrolling page and also export to HTML work fine in html... but I save as this site in php... fixed menu color change does not work... no color change r when scroll down. Please help us to what I can do... and how to export php

  There is more than one PHP page that simply changing the extension from .html to .php. You can trick the server in processing PHP code in an HTML file. Here is an explanation. Basically, you add a line to your file on the web server's .htaccess.

  https://encodable.com/parse_html_files_as_php/

• How to put a foot in a scrolling page, keep it visible site even when scrolling, using PC

  How to put a foot in a scrolling page, keep it visible site even when scrolling, using PC

  Hello

  Please select the footer items and pin them on the bottom like the screenshot below.

  

  Concerning

  Vivek

• Hello. Is it possible to jump to a certain part of a long scrolling page, using 'go to destination', in DPS?

  Hello. Is there a way to jump to a certain part of a long scrolling page, using 'go to destination "?

  Digital Publishing Suite helps | Overlays of hypertext link and button:

  Cles scroll smoothly, you can use decimals or percentages to access a specific position.

  Example: navto://myarticle#3.3 (jumps to a specific position in the article of smooth scrolling that appears at the bottom of page 4 and the top of page 5)

  Neil

• Is it possible to make a "GO DOWN" - button in a smooth scrolling page?

  It is possible to make a button GO UP in a page to scroll smoothly AND in a several page article

  It is possible to make a button GO to BOTTOM in a several page article (for example the button go to URL > navto://pagename#pagenumber-1)

  But is it possible to make a "GO DOWN" - button in a smooth scrolling page? Perhaps with some sort of anchor point?

  Yes, in the scenes, Smooth Scrolling items are divided into tiles, each tile is actually a page, so navto://articlename#99 will pass at the end of the article. You can even use fractions to jump to a specific point. See DPS tips > overlays advanced for an example.

• Extensions of the experience Manager 2.1.2 (Page builder Extension 0.6)

  Have someone worked on Extensions of the experience Manager 2.1.2 (Page builder Extension 0.6) and above all, I'm looking for solutions for these 3 cartridges (more important-> RefinementSelectorEditor)
  
  I changed the pbconfig.xml according to the PBX-lite idea shared by Peter Kim and teammate (a few months in Eden).
  
  
  < = Publisher "publishers: CalendarEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  < = Publisher "publishers: DataManipulationEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  < = Publisher "publishers: RefinementSelectorEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  Problem is when I start Report Builder page (as an experienced Manager call you now), I get these errors for the OpenEditorsText cartridge.
  
  The specified package contained no editors: CalendarEditor
  The specified package contained no editors: DataManipulationEditor
  The specified package contained no editors: RefinementSelectorEditor
  
  
  Thank you
  John

  John P and I were able to get these 3 editors working with the wine sample project that comes with Extensions 2.1.2 Manager experience. These should work out of the box.

  We hit the catch, is that there are several versions of PBX on the host previously for the Sling JCR became corrupted with different config over time/version files. If you want to be sure you have a fresh Sling JCR, you can stop the short tool Service and delete the contents of the Sling directory on disk (on windows, this is in C:\Windows\System32\sling for example. Under linux I believe it is located under the directory of the ENDECA_TOOLS_CONF/State Workbench (I don't have linux version available so can be a directory or both)). When you reinstall the extensions, the appropriate content of the canvas must be created.

  To ensure you have erased the tracks away from the previous config PBX, beyond to remove the Sling directory manually, you can delete the cached Tomcat under ENDECA_TOOLS_CONF/work and also don't forget to clear your browser cache. This should get rid of all old caching configurations and allow you to implement Extensions to the experienced Manager 2.1.2 freshly. It worked for us in these 3 editors getting usable in the experience Manager.

  Published by: Doracle on March 22, 2012 11:37

• Apex 4.2.5 skill builder 2.0.0 modal page plugin - refresh IR problem

  Hello

  I recently installed, configured and used the Skillbuilder 2.0.0. modal plugin page and it works very well (thanks guys) on apex 4.2.5 installed on Oracle XE 11.2 - in addition to a question:

  The link change on the interactive report does not work IE fails to show the modal pop-up window after update of the region interactive report (updating can be done either manually by clicking on the GO button or dynamically in the autoclose even case).

  Change the link works fine when you first go to page 1 and continues to work well until the interactive report region is updated.

  I have tried different browsers Firefox, Opera, Chrome, IE 11 - all exhibit this problem.

  I tried debug and the Inspector of the element, but nothing gives traction on the issue.

  Note also: basically, I followed the Skillbuilder youtube and I created an interactive report as that page 1 with a shape as a page 2, then following instructions to create dynamic actions, model page on autoclose etc...

  I made a few minor changes (for example the table is a table of 'real world' of 8 columns - not emp;) I did a static height and width % and changed the automatic closing selector element of article #uSuccessMessage which seems to work for theme 25.

  Has anyone encountered this before?

  See you soon

  Kevin

  Hello

  Check if you have set the "scope of the event" to "Dynamic" in the "Advanced" section on the dynamic action.

  When you refresh the interactive report elements are recreated and if the scope is set to static dynamic action is not connected to the elements more.

  Hope that helps,

  Moritz

• scroll page won't stay, arrow to the left of page breaks, the program freezes and crash

  I'm under Win Vista2007 sp2, IE9.0.2 I noticed that my roll was not in Mail W, now I am doing a slideshow and do scroll will not take in WMM or WMP. I can't use them.

  I know that WMM uses a lot of memory. It crashed the first day, again and again / 500pics. Then, I was able to make a DVD. Projects open once after that no, they just hang on. Whenever they crashed or does not open it takes me hours to get the photos.  My KODAK program crashed all the time too, but I think Windows closes it because it uses memory, not that I don't have. Now my back button does not work, it will just go back to the same page or jump page. WMP freezes. He also had other problems, can not remember what. My Performance is 3.2

  Help don't give me answers and if she helps him options usually do not exist on my computer, thank you MSN. I tried searching internet more yesterday, no response. I unplugged my mouse, I used maintaince on it, I turned on my stop scroll, I used a restore point, I updated and all scanned. The only option I have is the big hammer F. It comes to J4 trying to make a slide show.

  Windows keeps getting worse and harder to use. I push an option to do something and I get ths boring box ask that if I want to allow this, well DAA, I pressed the button, COMPUTER STUPID. I hate my machine. I spend too much time trying to do something on my computer. Its Apple, next time.

  So is there a solution? I wish I lived in a high building so I could throw this thing out the window.

  I discovered that my mouse went crazy, I tried to restart it, go fix a new mouse, I read a lot of inquiries about unstable scrolling, but no responses, which was my problem, the mouse had gone wrong...

• Refresh the interactive report without scrolling page?

  Hello.

  I have a page with three interactive reports arranged vertically on the page. I want that each of these reports to refresh automatically, so I added the following to my page header:

  setInterval ("jQuery('#report1').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report2').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report3').trigger ('apexrefresh');", 10000);

  The code works and the data is refreshed, the problem is that when this happens APEX seems to focus on the report, it is refreshing and page scrolls to it. This means that the user could be down at the bottom of page 3 of the report but every 10 seconds they are caught back to 1 at the top of the page report.

  Is it possible to refresh the reports without going through the emphasis placed on them?

  I use the Application Express 5.0.0.00.31

  Thank you very much.

  Andrew V wrote:

  Hello.

  I have a page with three interactive reports arranged vertically on the page. I want that each of these reports to refresh automatically, so I added the following to my page header:

  setInterval ("jQuery('#report1').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report2').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report3').trigger ('apexrefresh');", 10000);

  The code works and the data is refreshed, the problem is that when this happens APEX seems to focus on the report, it is refreshing and page scrolls to it. This means that the user could be down at the bottom of page 3 of the report but every 10 seconds they are caught back to 1 at the top of the page report.

  Is it possible to refresh the reports without going through the emphasis placed on them?

  I use the Application Express 5.0.0.00.31

  See APEX 5 - IR r region without losing the focus on the region of origin for a similar problem, but I do not think that the workaround solution discussed here will be of use to you.

  APEX 5.0.1 patch that contains a fix for this problem is now installed on apex.oracle.com. Try your page there to see if it solves your problem. The patch should be made public quickly.

• Problem with double direction scrolling pages

  I am trying to load two pieces of identification as an article for a DPS Folio.

  A single document 'xx_h.indd' which is 1024W x 1060 H, the other 'xx_v.indd' which is 768W x 1200 H.

  When I try to download the two orientation by Folio Builder > add article, then select 'Import the multiple items' and the folder that contains the two files, I get a warning:

  Error generating content.

  Cannot find the files to be imported as an article.

  If I import items open the _it is imported as an article of portrait.

  I managed with that for the other items of the folio where article landscape has less than 1024 px height.

  I thought about it, I have a Smooth Scrolling put vertically, not both Directions. I thought that the page will scroll vertically, a poor understanding of the menu setting. Thanks anyway.