#apexir_SAVED_REPORTS find the current value
APEX, Version 4.1.0.00.32
I have read and tried various solutions on how to detect a user selects a report IR saved from the drop-down list of the builtin report.
I find the same question, where it might work once on the PRIMARY selection / DEFAULT and once again 1 selected report is saved, but it does not detect the changes after that.
Ex: (after previous messages):
Dynamic event
Event: change
Selection type: Jquery
Selector value: #apexir_SAVED_REPORTS
Conditions: no
Then I just added a REAL action of an alert.
Fire on the loading of the Page = True
The alert is triggered once (I think because of the fire on loading the Page = True), the page displays the default (main report).
He fires again as I select a saved report.
But it does not shoot again, even if I select the report by default/primary.
I noticed the behavior even if I changed the right-click event; Selection type: Jquery; Selector value: #apexir_SAVED_REPORTS
That's all! Thank you very much for your time and an excellent explanation!
Tags: Database
Similar Questions
-
How do you find the current value of each sample when collecting a finite number of samples
My program works with an external clock with no constant pulse intervals and acquires a value of voltage on the front of these impulses. Is there anyway to get the value of the voltage at each pulse without having to wait until all samples are taken. I would Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} programmatically raises an event when the voltage reaches a certain level during the scan if so why I need to constantly monitor the voltage. "}
Any help would be great
Hi JED1986
I have two solutions for you, for your problem.
The first idea I would recommend creates the code below:
Remembeer to define the sources correctly, including the clock to read source as your external clock. The above code will be permanently read 1 single sample with a rising edge, write to the disk, clear and will continue to read the following sample.
Another way to proceed is to use an express VI and set the mode of acquisition as ' on demand ' with 1 sample currently playing. This is illustrated below and highlighted in red:
I hope this helps. Please let me know how you go.
-
JUCtrlListBinding - get the current value of the list
Hello.
(Win7 Jdev 11,1,2.)
I saw a personal code in the book 'Oracle Fusion Developer Guide' to get the current value of the listItem as below:
Import oracle.adf.model.BindingContext;
Import oracle.binding.BindingContainer;
Import oracle.jbo.uicli.binding.JUControlBinding;
Import oracle.jbo.domain.Number;
Import oracle.jbo.server.ViewRowImpl;
BindingContext bindingCtx = BindingContext.getCurrent ();
BindingContainer links = bindingCtx.getCurrentBindingsEntry ();
JUControlBinding listBinding = null;
listBinding = (JUControlBinding) bindings.get ("JobId");
ViewRowImpl selectedListRow = null;
selectedListRow (ViewRowImpl) = * listBinding.getSelectedValue () *; :(
String jobIdValue = (String) selectedListRow.getAttribute ("JobId");
Number of maxSalary = (Number) selectedListRow.getAttribute ("MaxSalary");
but Jdeveloper cannot find the method getSelectedValue() to listBinding.
Help me please to understand the correct method. !
Thank youDeclare the type of the variable listBinding as JUCtrlListBinding instead of JUControlBinding. The base class JUControlBinding does not contain a getSelectedValue() method, this method is defined in the subclass JUCtrlListBinding.
Dimitar
-
Find the average value of a buffer
Hello
In my VI Panel, I have a digital control, a button and a digital display.
When the user, enter a number in numerical order and press the button, the digital display should show the average value of all the past 5 values entered in the digital control, for example:
1st entry: 10-online average = 10 (as sum = 10)
2nd type: 0-online average = 5 (as sum = 10 + 0 = 10)
3rd enter: 5-online average = 5 (you get the idea...)
4 enter: 1-average online = 4
5 enter: 14-online medium = 6
6 enter: 2-online average = 4.4 (sum = 0 + 5 + 1 + 14 + 2 = 22, because the 1st value is thrown)
How to write this VI?
Thank you!!
You can also use arrays to hold the data in a registry change and find the average value of the last five items.
Good luck
-
Subtract value of the signal of the current value 2 seconds ago
Hello
I'm relatively new to LabView, but I went through the Forums and google a lot and have not found a solution. I have this problem:
I have an analog signal from my USB6009 DAQ of NOR. I want to take the signal I got 2 seconds ago and subtract its value to the current value. And I want to do it countinously.
My data are acquired 1 sample on request by NIDAQ Deputy in while loop.
Signal result should be something like:
Y = y - y(t-2), where there is a result and there is a signal of NIDAQ.
Can you help me or anything else you need to know to help me? Thank you.
You must use a ring instead of the shift register buffer.
Your signal source must be configured to read constantly (take readings more (best would be multiple of line period) and average)
-
Find the minimum value of the table in time...
Firstly that it is not "find the min value in the table.
It is:
I have a table that changes its values at each iteration, and I want to compare the new values with previous values and make a new array with the minimum values...
In C++, it would be like this:
int main() {}
int array [8];
int min [8];
int i;
for (i = 0; i<>
min [i] = 1000000; Initialize minimum table with a high value
}
{while (1)}
Array = update_array ();
for (i = 0; i<>
If (array [i]<>
min [i] = array [i];
}
}
do things...
}
return 0;
}
IM new to labview and it always confuses me a lot...
Thanks in advance.
Using the function Max & Min regular (not table Max & min as you know) with tables and a good will of employment registry change. Max Min &, as most of the digital functions, is polymorphic and works witt tables as well as scalars.
Lynn
-
How to make the current value by default to all controls both
Choose 'Data Operation'-> 'Do current Default value' to several controls requires a lot of clicking. Is it possible to do so with a single click?
Yes. If you select no control, he says 'Do the current default values' and it does all the controls at the same time. If you have a control is selected, then it does so only the selected controls.
Reset the current values default works in the same way. Do not select anything, he does all the controls at the same time.
Bob Schor
-
Get the current value of a control of the ring
I have a control of the ring that has the following values. See attacment. I need to get the current value of this one and use it as input for another function, but First I would like to get the current value and save ina text file. I tried this
if (event == EVENT_LEFT_CLICK_UP) || (event == EVENT_LEFT_CLICK_DOWN) { int p; GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p); FILE *OutFile = fopen("C:\\Users\\Student\\Desktop\\ringtest.txt","w"); fprintf(OutFile,p); fclose(OutFile); }
I need to get the current value of the ring (& p) to write to the file ringtest.txt.
Also, I need to use this value (& p) as another entry in the same program.
IE value of & p must be used in
b = c * 5; where c is the value of the current & p.
Can any 1 help?
You're right: EVENT_LEFT_CLICK_DOWN is not a valid event for the CVI. Valid events are listed in the userint.h file, and are the only events that can be caught in the trap in a point of order. On the other hand, you're assuption on EVENT_VAL_CHANGED is correct: you can trap forget the EVENT_CLICK_UP event.
According to the second question, looking at the definition for fprintf you must pass a string format as the second parameter to the function, then the value to write to the file. In your case, the correct syntax is:
fprintf (OutFile, "%d", p);
-
I have a need to query the most recent entry in a value in a field became the current value, but it is possible that it was this value before, so a simple MIN() is insufficient.
Example, I want to date the EMPLID reported to the current REPORTS_TO
EMPLID REPORTS_TO EFFDT OTHER_DATA Comment 123456 500500 01/12/2010 xxx 123456 500500 15/12/2010 XYY 123456 500999 30/01/2013 XYZ 123456 500999 30/06/2014 zzz 123456 500500 15/01/2015 ABC GET THIS EFFDT 123456 500500 01/12/2015 nnn Most of the time a MIN() would work, but there are cases like this that throw me a curve known.
Any advice is most appreciated. Thank you!
WITH emp_report_tab AS
(SELECT emplid 123456, 500500 reports_to, DATE ' 2010-12-01' effdate FROM dual)
UNION ALL
SELECT emplid 123456, 500500 reports_to, DATE ' 2010-12-15' effdate FROM dual
UNION ALL
SELECT emplid 123456, 500999 reports_to, DATE ' 2013-01-30' effdate FROM dual
UNION ALL
SELECT emplid 123456, 500999 reports_to, DATE ' 2014-06-30' effdate FROM dual
UNION ALL
SELECT emplid 123456, 500500 reports_to, DATE ' 2015-01-15' effdate FROM dual
UNION ALL
EmplID SELECT 123456, 500500 reports_to, DATE ' 2015-12-01' effdate FROM dual)
SELECT er0.emplid, MIN (er0.effdate)
Of emp_report_tab er0
WHERE er0.effdate >
(SELECT MAX (er1.effdate)
of emp_report_tab er1
where er1.emplid = er0.emplid
and er1.reports_to! =
(By SELECTING er2.reports_to in emp_report_tab er2
WHERE er2.emplid = er1.emplid
AND er2.effdate =
(select max (effdate) in emp_report_tab er3
where er3.emplid = er2.emplid
and er3.effdate<=>=>
GROUP BY er0.emplid;
EMPLID MIN (ER0. E
---------- ---------
123456 15 JANUARY 2015
-
How to find the current level of the tree in oracle forms?
Hi, I want to find the current level of the tree when the user click on a node wants to find current level how to do this?
Dear Mohammed,
You can use the FTREE. GET_TREE_NODE_PROPERTY ('tree_block.tree_name',: SYSTEM.) TRIGGER_NODE, FTREE. NODE_DEPTH); To achieve the current level of the node.
Kind regards
Manu.
-
PL/SQL loop to find the minimum value
I want to find the minimum value from a table using the pl/sql loop
I have data format below.
1 ABC 2
1 ABC 20
1 ABC 500
1 ABC 2000
XYZ 2 250
JKL 3 300
MNP 3 350
3 KLM 400
I wrote the code below. His does not work. Please suggest.
Set serveroutput on
declare
x number: = 3;
y VARCHAR2 (3): = 'ABC ';
fmin number: = 0;
number of Fmax: = 0;
Start
for rec in (select sal from test
where id = name and x = y) loop
If rec.sal > fmin then
fmin: = rec.sal;
on the other
FMAX: = rec.sal;
fmin: = fmax.
end if;
end loop;
dbms_output.put_line (Fmax);
end;
/I want to output 2 on top of code.
Thanks in advance
Why PL/SQL? SELECT MIN (SAL) OF TEST will be more rapid and much less coding. In any case:
declare
number of v_min_sal;
Start
for v_rec in a loop (select sal from emp)
If nvl (v_min_sal, v_rec.sal + 1) > v_rec.sal
then
v_min_sal: = v_rec.sal;
end if;
end loop;
dbms_output.put_line (' lowest salaray is "' |") v_min_sal | '"');
end;
/
The lowest Salaray is "800".
PL/SQL procedure successfully completed.
SQL >
SY.
-
Hi team,
I have the following query where I need to find the max value
[code]
with t as)
Select 'L1' R_nm, R_Data 'Data', 'Obj' R_Obj, r_prec 'Wd', '2' double val
Union of all the
Select 'L1', 'Data', 'Obj', 'No', '4' double
Union of all the
Select 'L2', 'Data', 'Obj', 'No', '4' double)
Select t.*, max (val) on rk (partition r_nm, r_data, r_obj) of t
[/ code]
My results should be
[code]
r_nm r_data r_obj r_prec rk val
L1 Data Obj 1 2 Wd
L1 data Obj 4 No.2
L2 Data Yes 1 1 Obj
[/ code]
Thank you
Hello
It seems that you are not interested in the MAX at all. Looks like you want to classify the lines, such as one that has the lowest value is assigned the number 1, the 2nd line with the lowest values gets 2,... and line with him gets N-th lowest value N. If is not serious if the MAX is 4, 2 or 420.
Here's a way to do it:
SELECT T.*
, RANK () OVER (PARTITION BY r_nm, r_obj)
ORDER BY val
) AS rk
T
ORDER BY r_nm, r_obj
val
;
Depending on how you want to deal with links, you can use ROW_NUMBER or DENSE_RANK instead of RANK.
-
How to get the current value of db in backing bean
Hello
I use jdeveloper 11.1.2.3.0
I would like to know how I could access the old value of an attribute in backing bean.
I know I can get it in terms of EntityImpl with the getPostedAttribute function,
but as I see that I'm not allowed to access this function in the ViewImpl.
I get this error:
Error (151,33): getPostedAttribute (int) has protected access to oracle.jbo.server.EntityImpl.
Could you help her?
What is the right way to get the current value on db in backing bean?
Thank you very much!You can add a transitional attribute to the entity object to hold the old value of the desired attribute, then you can add this attribute to the view object.
Check [url http://www.youtube.com/watch?v=iKVIiK0FBXI] retrieve the previous value of an attribute ADF BC -
How to get the current value of the checkbox button programmatically in the adf
Hello
I want to get the current value of the checkbox (checked/unchecked or 0/1) in my bean java whenever I press the button "submit" on my page jspx.
My version of JDeveloper is: 11.1.1.6.0Where the value checkbox link? The State of the check box is held in the value property of the check box. This is normally an EL as
#{bindings.Myvar1.inputvalue}
or something pointing to a bean property. This value can be read from the listener to the action of the submit button
BindingContainer bindingContainer = BindingContext.getCurrent().getCurrentBindingsEntry(); AttributeBinding attr = (AttributeBinding)bindingContainer.getControlBinding("Myvar1"); Object obj = attr.getInputValue();
Timo
-
Hello.
I use jdev11.1.5
I had created the Office of evaluation, namely fin_period, rec_dist_doc_hd
I had also created a VO with readonly querry
My scenario is that I need to get the current value of the finperiod attributeselect distinct fp_bu,fp_year,fp_period, decode(gdh_status,'R','Yes','No') distribution,decode (aj_status ,'N','Yes','No') Recursion, decode(RSUPHD_STATUS,'P','Yes','No') Supplier,decode(RCDOC_STATUS,'P','Yes','No') Customer from gl_dist_hd,fin_periods,appl_journals,rec_suplr_doc_hd,rec_cust_doc_hd where fp_bu = gdh_bu(+) and gdh_bu = aj_bu(+) and aj_bu = RSUPHD_BU(+) and RSUPHD_BU = RCDOC_BU(+) and fp_year = gdh_year(+) and gdh_year = aj_year(+) and aj_year = RSUPHD_DOC_YEAR(+) and RSUPHD_DOC_YEAR = RCDOC_DOC_YEAR(+) and fp_period = gdh_period(+) and gdh_period = aj_period(+) and aj_period = RSUPHD_DOC_PERIOD(+) and RSUPHD_DOC_PERIOD = RCDOC_DOC_PERIOD(+) ORDER BY fp_period asc
links below explains my scneario
http://www.4shared.com/photo/XyV4inog/D001.htmlHello.
If you want to get the attribute value in your ApplicationModuleImpl class
then try this methodViewObjectImpl vo = getYourViewObjectName(); Row current = vo.getCurrentRow(); Object val = current.getAttribute("FpPeriod");
Maybe you are looking for
-
Thunderbird timer does not not on Win10 when iconed
I'm running 38.2.0 on Win10 and noted that if Thunderbird is iconed it does not check the stack of mail on my ISP. Once I bring him to a window apparently the timer starts up and finally he reached 10 minutes and check. I guess something about the so
-
Satellite L550D-13V - how to recover without recovery disks?
Hello I had a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V. I tried to fix it, but it does not work. So I decided to recover via HARD disk utility.Everything seems to be okay, but ultimately the tool said that errors have
-
Satellite L450-136 model video transfer from camcorder to laptop
HelloI recently bought your laptop model Toshiba Satellite L450-136. I want to transfer video from my SONY camcorder to the laptop.The SONY camcorder has a slot 4 pins. In this model laptop I think their isn't any location of 4 pins.Can you please ad
-
Satellite L350 updated Bios to pad 2.1 and lost
Hello As indicated above for the update Bios to 2.1 later I lost the functionality of numeric keypad, not the right side as if it were a good keyboard.The above keys work IE delete scroll etc. The numlock light does not illuminate, but it does if I a
-
Windows starts screen indicating avg watchdog began. Nothing happens after that.
Original title: pc work cus ov avg watchdog please help? my pc starts 2 charge, the windows xp page appears, but he's going 2 a blue page where it is said that avg watchdog started & then I can't do anything at all other than putting out my pc, there