Appellant DB stored procedures before committing changes.
HelloI use JDeveloper 11.1.1.6.0.
I have a use case that requires me to do the following:
When you create a new transaction in master-detail, I have to call a stored procedure that selects the transaction full master/detail and insert it into a table to archive. To resolve this problem, I have substituted the beforeCommit method in the implementation of AM class and call the stored procedure from the pharmacokinetics of the current line in my header VO. I found this solution after reading [http://www.oracle.com/technetwork/developer-tools/jdev/index-092937.html] written by Steve Meunch. More specifically the following, that I needed the whole transaction in the database before calling the stored procedure.
+ POST-FORMULAIRES-COMMIT
Run the code after the "posted" all the lines necessary for the database, but before issuing the VALIDATION data at the end of the transaction. If you want a single block of code for the entire transaction, you can override the doCommit() method in a custom DBTransactionImpl object and write code before calling super. To run the code specific to the entity before validation for each entity affected under the operation, override the method beforeCommit() on your entity object and write the code it. +
The second part of the use case allows a deletion on the header only. This action should also call the stored procedure and insert the transaction full master/detail in the table of archive. To do this, my previous solution does not work. The current line is not the line that has been deleted. In the article referenced above, I assumed that the following could offer me the solution,
+ PRE DELETE
Run the code before the line removed the datablock is REMOVED from the database during the processing of "post". Method doDML() override in your entity class and if the operation is equal to DML_DELETE, then write the code before you call the super. +
Actually it works, but the overridden beforeCommit also runs, so I have the deleted record and the next record in the VO inserted in my table of archives.
I tried a few options by exposing the method that calls that the stored procedure for my UI project, but it has also some problems, as my PK is filled with DBSequences and at the point of my workflow when I run the sequence method is not yet filled.
Ideally, I'd like that some entries in how I might solve this problem to my business services layer.
Concerning
Leon.
To be honest I would always fix this to the database layer, copy the following code is negligible in the PLSQL triggers, why clutter up the average level by additional detours?
CM.
Tags: Java
Similar Questions
-
call a pl/sql stored procedure from a report link
Hi all:
I have a report with a link in a column, which you take to another page and passes the values to this page, but also need to link, run a stored procedure before you go to the other page.
In the Forum, I found a case similar to this one, but none of the examples is clear to me that I'm doing this. It seems that the target of the link must be URL, and also I have to call the stored procedure with a javascript function.
My questions are:
-Is the best way to do what I need?
-How should be the syntax of the link that takes me to another page and run the "procedure".
-How and where I put the "javascript" function to execute the "stored procedure".
BDD: Oracle 11 g
Apex 4.1 version
Best regards
GerardHello
Change the link to call an apex.submit procedure. (javascript).
Edit:
I created a basic example.
Region 1 (just so that you can see the value ready):
Select: P27_HIDDEN item_Value
of the doubleRegion 2:
rownum SELECT id, dbms_random.string ('U', 12) sss
of the double
connect by level<=>=>element attributes for ID:
Target: URL
URL: javascript:apex.submit ({request: 'NAVIGATE', value: {'P27_HIDDEN': #ID #}});(P27_HIDDEN is just a hidden item I created)
http://Apex.Oracle.com/pls/Apex/f?p=54920:27
Edit2:
In your case, then you can only have a page based on conditions request = expression1, expression1: NAVIGATE... then a branch of the page to go to the desired page, also with the same conditions
Edit3:
I'm not sure what examples you're talking about, that you provide no link; but you mention calling the stored procedure of javascript, so would probably involve some AJAX, but is not necessary IMO.
-
user_table should be used in the stored procedure.
Hello
I want to find my permanent table user_tables and then drop and recreate it,
I can use this user_tables in my stored procedure for above purpose or is there any notice that must be used.
SP is admin sp, used to run in offline mode.
yorus truly
Published by: 944768 on 10 February 2013 23:44
Published by: 944768 on 10 February 2013 23:44944768 wrote:
but I wanted to know that can I use user_table in above proc stored to conclude and then drop and create it when Everitt runs?Oracle manages two "flavors" of the stored procedure - copyright and rights of the Summoner. Rights of the DEFINER (default) is always performed under stored security area of the owner of the procedure no matter who calls it. So, if you ask USER_TABLES (or any display USER_, besides) within DEFINER rights stored procedure, you will get a list of tables owned by the owner of the stored procedure, not stored calling procedure. Rights (AUTHID CURRENT_USER) stored Invoker procedure is always carried out under the domain of the calller security. Therefore, if you are querying USER_TABLES (or any display USER_, besides) within the Summoner rights stored procedure you will get a list of tables belonging to the appellant a stored procedure. Hope it answers your question.
SY.
-
infinite loop in stored procedure
I am trying to create an infinite loop to test an error condition. I do this in the stored procedure. I have not created a stored procedure before. I get errors when I am writing the script. Can you please tell me what I'm doing wrong with this script?
CREATE OR REPLACE PROCEDURE blah.test_timeout
IS
number of deadline_days: = 1;
grace_period number: = 0;
BEGIN
-get day of the date limit
While deadline_days < 4000
LOOP
grace_period: = grace_period + 1;
dbms_output.put_line (' Hello mum ');
END LOOP;
RAISE_APPLICATION_ERROR (-20071, "what_error error:' | ') SQLERRM (sqlcode));
END;
/
Thank you!First tell me that this error message happens when you run this script.
You can use only * $, _, #* when you give the name of procedure, function, package, variable, trigger. Here, you use * (.) * in your name of the procedure so it will give you error.
and you first declare exception in your procedure declaration section. and raise it in Exception of procedure section.
In this you have to give the condition for which exception condition must raise.This is a sample I'll send to your reefrence:-_
CREATE OR REPLACE PROCEDURE raise_demo (inval NUMBER) IS
evenno EXCEPTION;
oddno EXCEPTION;
BEGIN
MOD IF (inval, 2) = 1 THEN
RAISE oddno;
ON THE OTHER
RAISE evenno;
END IF;
EXCEPTION
WHEN evenno CAN
dbms_output.put_line (to_char (Inval) |) "is even");
WHEN oddno THEN
dbms_output.put_line (to_char (Inval) |) "is weird");
END raise_demo; -
The call PLSQL stored procedure from the HTML form Submit button
Hello
I'm having a little difficulty with the appellant a stored procedure using a html form button. Here is the code I have right now...
Here's the question - I need to find a way to pass variables to this stored procedure, so he knows what data to operate on. This stored procedure removes the data in a specific database record and I have to pass three variables to this procedure to run.HTP.PRINT('<form action=ZWGKERCF.P_confdelete>'); HTP.PRINT('<input type=''submit'' value='' Yes '' onClick=''document.getElementById("mypopup").style.display="none"''>'); HTP.PRINT('</form></div>');
Allows to call class_number, term, conf will impact these three variables and the data will be deleted and the person will see a confirmation screen once the deletion request completed.
So ideally I would want: ZWGKERCF. P_confdelete (class_number, term, conf), then the stored procedure would deal with the rest!
Seems simple enough, but I don't know how to make this happen... My thoughts were:
Transmit data to this (the three areas that I need) html form in hidden variables. Then somehow pass them using the POST method to the procedure and read using GET?
Can someone clarify what the best way to do it? I feel that its little something miss me you - but I would really like an idea expertise :-)
Thank you very much in advance!
-Jeff>
...I would like to assign a variable, the duration, the conf crn all variables in this procedure and then act on them accordingly.
But you already have it in a variable. If you want you can assign the value again to another variable.
example of
PROCEDURE P_confdelete(CRN NUMBER,TERM NUMBER, CONF VARCHAR2) IS v_crn number(38); v_term number(38); v_conf varchar2(1000); BEGIN HTP.PRINT('test1 '||crn||'/'||term||'/'||conf); v_crn := crn; v_term := term; v_conf := conf; HTP.PRINT('test2 '||v_crn||'/'||v_term||'/'||v_conf); END P_confdelete;
-
IOS XR - How to show the complete changes before committing?
In IOS XR, there is an order to see the complete changes before committing? For example:
RP/0/0 / CPU0:INET #show running-config prefix-set MYPREFIX
Mon Oct 24 15:06:16.288 ARBUE
all of the prefix MYPREFIX
the 10.0.0.0/8 32,
172.16.0.0/12 32,.
192.168.0.0/16 32
end-set
RP/0/0 / CPU0:INET #Configure terminal
Mon Oct 24 15:06:30.427 ARBUE
RP/0/0 / CPU0:inet (config) #no set prefix MYPREFIX
RP/0/0 / CPU0:inet (config) #show the configuration
Mon Oct 24 15:06:38.767 ARBUE
Building configuration...
!! Configuration of the IOS XR 6.1.1
!
no set prefix MYPREFIX
endBut I want to see the full content of all of the prefix before validation, something like this:
RP/0/0 / CPU0:inet (config) #show configuration?
no set prefix MYPREFIX
! the 10.0.0.0/8 32,
! 172.16.0.0/12 32,.
! 192.168.0.0/16 32
! - coverDitto for the political course and for the BGP neighbors. Thank you.
You can get a diff of the changes, like this:
lab01(config)#no prefix-set MYPREFIXlab01(config)#show commit changes diffWed Oct 26 15:56:21.322 CESTBuilding configuration...!! IOS XR Configuration 5.3.4 !- prefix-set MYPREFIX- 10.0.0.0/8 le 32,- 172.16.0.0/12 le 32,- 192.168.0.0/16 le 32- end-setend
-
change the caption of the label of a result of the stored procedure
I have need to change the caption of the label on the report using the generator of reports and the source of data to a stored procedure.
Your information and your help is much appreciated,
Kind regards
Iccsi
There are at least two ways to handle this.
The first is to transmit the column headings to the State as parameters.
The second is to use a subreport that uses a record-results set that contains the column headers. You will need to set the sub-rapport to zero margins to get things to line up correctly.
-
How to edit or change a stored procedure?
I created a stored procedure with the name getRecords 1 months ago
I want to change this getRecords of stored procedure
Please tell me how to change the stored procedureSo what you would do is
Starting sqldeveloper, connecting as the owner of the procedure.
In the tree list, expand the entry procedures.
You will see all the procedures in this scheme.
Double-click the procedure that you want to modify, and a window opens with the source code.-----------
Sybrand Bakker
Senior Oracle DBA -
appellant the pl/sql stored procedure
Jdev11g R2, ADF BC
I have a stored procedure 'COPY_BKG_E2I' and it has three input parameters to generate a new record in the database.
===========================================================================
I created the AM method as follows and defined as method of the client AM class:
=========================================================
helper method:
===========
protected void callStoredProcedure (String stmt, Object [] bindVars) {}
PreparedStatement st = null;
try {}
// 1. Create a JDBC PreparedStatement for
St = (PreparedStatement class) getDBTransaction () .createPreparedStatement ('start' stmt + ";"end;", 0);
If (bindVars! = null) {}
// 2. Loop on values for the bind variables passed, if any
for (int z = 0; z < bindVars.length; z ++) {}
// 3. Set the value of each variable binding in the statement
st.setObject (z + 1, bindVars [z]);
}
}
// 4. Execute the statement
st.executeUpdate ();
}
catch (SQLException e) {}
throw new Aexception.getLocalizedMessage (e);
}
{Finally
If (st! = null) {}
try {}
// 5. Close statement
St.Close ();
}
catch (SQLException e) {}
}
}
}
call the stored procedure:
{} public void callProcWithThreeArgs (String V_BKG_NO, String V_VESSEL_ARRIVED_REMARKS, Date V_ATA_POD_D)
callStoredProcedure ("COPY_BKG_E2I(?,?,?)", ")
New Object [] {V_BKG_NO, V_ATA_POD_D, V_VESSEL_ARRIVED_REMARKS});
}
Now, I created back bean and page fragment,
=================================
in my page fragment, I bind the field three entries to the bean back:
============================================
package olfms.view.backing;
Import oracle.adf.view.rich.component.rich.input.RichInputDate;
Import oracle.adf.view.rich.component.rich.input.RichInputText;
Import oracle.adf.view.rich.component.rich.output.RichOutputText;
public class saveBkgUpd {}
Private RichOutputText bkg_no;
Private RichInputDate arrive_date;
Private RichInputText arrive_remarks;
public saveBkgUpd() {}
Super();
}
{} public void setBkg_no (RichOutputText bkg_no)
This.bkg_no = bkg_no;
}
public RichOutputText getBkg_no() {}
Return bkg_no;
}
{} public void setArrive_date (RichInputDate arrive_date)
This.arrive_date = arrive_date;
}
public RichInputDate getArrive_date() {}
Return arrive_date;
}
{} public void setArrive_remarks (RichInputText arrive_remarks)
This.arrive_remarks = arrive_remarks;
}
public RichInputText getArrive_remarks() {}
Return arrive_remarks;
}
My question:
//?????? How to call the callProcWithThreeArgs with these three bkg_no; arrive_date; arrive_remarks; Help, please! Thank you!
?
}Check your imports
especially: import oracle.binding.BindingContainer;
This is the bean of tireimport oracle.adf.model.BindingContext; import oracle.binding.BindingContainer; import oracle.binding.OperationBinding; public class Test { public Test() { } public BindingContainer getBindings() { return BindingContext.getCurrent().getCurrentBindingsEntry(); } public String callProcedureProgramatically() { BindingContainer bindings = getBindings(); OperationBinding operationBinding = bindings.getOperationBinding("callProcWithThreeArgs"); operationBinding.getParamsMap().put("param1", "first value"); operationBinding.getParamsMap().put("param2", "second value") ; operationBinding.getParamsMap().put("param3", "third value"); Object result = operationBinding.execute(); if (!operationBinding.getErrors().isEmpty()) { return null; } return null; } }
-
Function of stored procedure defined by the user of the appellant
Hi all -
I am trying to call a function defined by the user of a stored procedure. I'm using something like
the above is correct.IF condition1 THEN function1(param1, param2); END IF;
I have PLS-00221 function1 is not a stored procedure or is not defined?Well, if it is a function, you will need to assign its result value in a variable.
Like this:
DECLARE some_variable [of the right datatype]; ... IF condition1 THEN some_variable := function1(param1, param2); END IF;
-
Call the stored procedure, and bind parameters by name
Hello
I use the Oracle ODBC 12 c driver to pass values from one Interface to our database Oracle 11.2. The Interface software collects data from modbus protocoll and calls a stored procedure. Right now my syntax to call the stored procedure looks like this:
CALL procedure-name ('STRING', 'Timestamp as String', numValue1);
It works very well. Now, I have to add a default setting to my procedure. To stay flexible to make other changes, I want to call the procedure and bind the parameters by name. Release 10.2.0.1.0 ISC ODBC Notes:
Added support for the named parameter, binding the parameters by name. ODBC Oracle driver now allows the application to specify the parameters of a stored procedure by name, in the procedure call. Named parameters are to be used in calls to stored procedures and should not be used in other SQL statements.
So, it shouldn't be a problem to use named notation, but how do I do this in ODBC? I tried like this, but oracle returns an ora-00936 error of missing expression:
call procedure-name (paramName1 = > 'STRING',= paramName2 > 'Timestamp as String',paramName3 = > numValue1).
Thank you for your help.
Finally, I was able to find the error. The syntax of the statement was very good. The problem was caused by another declaration that I edited before and the error has not attracted Attention immediately.
Thanks for reading and looking for an answer.
-
Logic of tip insert - using a stored procedure?
Here's my use case:
- I have a table called TAGS that has two columns: id (number key, primary) and text (string)
- the table has a constraint of database set that each text must be unique
- the table also has a fixed sequence back next id available
- I created an entity of the DB object and its default View object
- I also created a page where I display a table read-only based on the View object
- Finally, I added a text field and a button to the page
- What I want to achieve is to insert all tags entered in the entry in the table fields, when the button is clicked. Note, however, that the entry field is a comma-separated list of tags, moreover, I have to insert only those tags that are new (to respect the constraint of database), and finally, I would like to use the sequence in insert or orders. Once completed, the page should also be updated.
My first question is whether a stored procedure is the right way to perform such a step insert logical. If not, what other means must be used in the ADF.
My second question is to know how to call the stored procedure and pass it the value of the input as a parameter field. I found this article http://andrejusb.blogspot.cz/2011/04/invoking-stored-procedures-and.html, but miss me a few transition points:
- How the callGreetingsFunction method call (I just get it that it's a method of the EO generated Java class?) after that the button is clicked?
- How to pass the value of the input field in this method as a parameter?
Thanks in advance for your help.
Now, what happens if I run it like this:
A. the procedure is executed after a click on the button
(B) the page is not updated (I had to do the research to get the new lines are visible in the table)
C. the constraint is ignored (after discounting there were several lines with unique identification number, but pr is - empty)
D. nothing has been committed to the database - if I closed the application window and it start again, the lines have disappeared from the table, but addition of new lines used number of increased seq
E. Similarly, if I did directly inserts into the database, these lines did not appear until I transferred the application
B. told it page to refresh. And that's usually enough to refresh your ViewObject with: viewObject.executeQuery)
C. Si the constraint is not enforced for null values. And this has nothing to do with the adf, this is related to oracle db.
D. you're calling commit.
E. you must re-run your view object (viewObject.executeQuery ())
Nevertheless, here is my rookie questions:
There there a simple way to refresh the page (or just the table containing the data)?
-How to validate changes (immediately after execution of the procedure)?
-How is the constraint has been ignored? I am sure it would fail on validation, but I thought that it will be considered even for adding data to the table.
-Are there a way to update the original Version of the database every time that the page is opened or refreshed?
-Drag and drop operation Execute like button on your page (or call vo.executeQuery () by program)
-Drag and drop the operation of posting as a button on your page (or invoke it by programming on the DBTransaction object)
-ignored for what values? for null values? It is expected, because each null is "unique."
-Yes, but you probably shouldn't do that for performance reasons, see this: Andrejus Baranovskis Blog: Cache results for ADF iterator property
Read also this: Andrejus Baranovskis Blog: job ADF and PL/SQL Invocation changes side effect
Dario
-
How to do this consult of a hierarchical recursion on a stored procedure? Help!
Please help me, im using oracle 11g
I have 2 tables
Department table (number of I_Depto (1), number of E_Depto (30));
i_depto e_dept
1 Finance
2 shopping
3 sistemas
4 rh
Empleado table (I_Emp number (5), N_Emp varchar (20), Q_salary (8.2) number, number of I_boss (5), the number of I_Depto (1));
i_emp n_emp q_salary i_boss i_dept
Juan 100 300 null 1
200 100 100 1 Pedro
300 Angélique 150 100 1
400 70 300 2 alberto
500 60 300 2 Miriam
600 3 500 80 moises
And yet, I have 3 conditions:
If the boss has 3 employees or more, he has increased his salary by 20%
If the boss have 2 employees, there was an increase in his salary of 10%
And if 0 or 1 employee, there is an increase of 5%
herarchical diagram is like that
-> Pedro Juan
Juan-> Angelica-> Alberto
Juan-Angelica-Miriam-Moses > > >
I have to present the name of the Department (e_depto) in the console and the result should be like this;
SQL > exec p_example ('finance');
Employees of BOSS of the boss pay increase employees (name) boss of the salary increase employee employees employees
juan 6 60 pedro 0 5
juan 6 60 angelica 3 45
pedro 0 5 NULL 0 0
Angelica 3 45 alberto 0 5
Anglica 3 45 miriam 1 3
SQL > exec p_example ('shopping');
Employees of BOSS of the boss pay increase employees (name) boss of the salary increase employee employees employees
alberto 0 3.5 - 0 0
miriam 1 3 moises 0 4
SQL > exec p_example('sistemas);
Employees of BOSS of the boss pay increase employees (name) boss of the salary increase employee employees employees
moises 0 4 - 0 0
His need to create a recurrence, stored procedure
The query I have is this, but it only shows me that the boss and the boss employees.
createor replace procedure deptos (depto varchar) as
t_boss varchar (49);
t_employ varchar (50);
cursor c_depto (t_depto varchar) is
Select a.n_emp boss, employee of b.n_emp
of empleado a, b empleado, departamento d
where a.i_emp = b.i_boss (+) and d.i_dept = a.i_dept
and a.i_emp in (select i_EMP from empleado where i_dept = t_dept);
Start
Open c_depto (depto);
loop
extract the c_depto in t_boss t_employ;
When the output c_depto % notfound;
dbms_output.put_line (t_boss |) Chr (9) | Chr (9) | t_employ);
end loop;
end;
/
Hello
I know it's a pain to post CREATE TABLE and INSERT statements for the sample data. Think about why it is necessary: that people who want to help you can recreate the problem and test their ideas. If you post statements that do not work, which does not recreate the problem or to test their ideas. Test (and, if necessary, correct) your statements before committing. Make sure all quotes are balanced.
I don't understand the desired output. For example, when n_emp = 'Juan', why is-employees_ofthe_boss = 6, 5 no? When n_emp is 'Angelic', why is-salary_increase = 45, not 30? When n_emp = 'Alberto', why is-salary_increase = 5, not 3.5?
You may want something like this:
WITH universe_dup AS
(
SELECT i_emp, n_emp, q_sueldo, i_jefe
SYS_CONNECT_BY_PATH (i_emp, ","). ',' AS line
, LEVEL AS lvl
Of empleado
START WITH (IN) i_depto
SELECT i_depto
OF Department
WHERE e_depto = 'Finance' - or what you want
)
CONNECT BY i_jefe = PRIOR i_emp
)
universe
(
SELECT i_emp, n_emp, q_sueldo, i_jefe
MAX (lineage) DUNGEON (DENSE_RANK LAST ORDER BY lvl) AS lineage
MIN AS min_level (lvl)
Of universe_dup
GROUP of i_emp, n_emp, q_sueldo, i_jefe
)
got_salary_increase AS
(
SELECT a.i_emp, a.n_emp, a.i_jefe, a.min_level
EARL of (d.i_emp) AS employee_cnt
, a.q_sueldo * CASE
WHEN COUNT (d.i_emp) > = 3 PUIS.2
WHEN COUNT (d.i_emp) = 2 PUIS.1
OF AUTRE.05
END AS salary_increase
OF the universe a
LEFT OUTER JOIN universe d ON d.lineage LIKE '%', | a.i_emp | ',%'
AND d.i_emp <> a.i_emp
GROUP OF a.i_emp, a.n_emp, a.i_jefe, a.min_level, a.q_sueldo
)
SELECT p.n_emp AS boss
p.employee_cnt AS employees_ofthe_boss
p.salary_increase AS salary_increase_boss
c.n_emp AS employees_name
, NVL (c.employee_cnt, 0) AS employees_ofthe_employee
, NVL (c.salary_increase, 0) AS salary_increase_employee
OF got_salary_increase P
LEFT OUTER JOIN got_salary_increase c ON c.i_jefe = p.i_emp
WHERE p.min_level = 1
;
Depending on your data and your needs, it may be more effective to do "START WITH i_jefe IS NULL", as one of the above. I guess "START WITH i_depto (...)" in the largest tables, when efficiency is more important.
-
Hello
I am facing a problem in which I want to extract a line newly entered into the database table but impossible to recover before as I have post the transaction.
I created a VO based on an OA. I inserts a new row into the table by using vo.insertRow (row). I am able to get the data that is stored in an object by using the Get accessor methods. But I want back the newly input line, which I am unable to get that returns a null value. The line is returned only when I put the only.
Can someone help me, how do I retrieve this record before committing?
Concerning
Rahul
Hello
Thanks for your reply. I found the solution for this.
The new inserted row is not displayed in the database table until it is committed.
I used the necessary line RowImpl object, and I do changes to this object in row after insertion, but before the transaction is committed.
Thanku
-
How to call oracle stored procedure with hibernate
Hi all
I wrote the following stored procedure:
create or replace
PROCEDURE SP_GET_NUMBER (p_cursor sys_refcursor, departmentId in number, userId in number, documentTypeId number)
as
Enter the integer;
sqlScript varchar2 (60);
Start
sqlScript: = "select registrationnumber_seq.nextval from dual;
immediately run sqlScript in register;
dbms_output.put_line ('Nextval is: ' |) To_char (Regid));
insert into roketsanuser.registrationnumbers
(id, departmentid, documenttypeid, number, registrationstatus, status, updatedate, updateuserid, version)
values
(enter it, null, null, enter it, 0, 0, sysdate, 0, 0);
commit;
Open the p_cursor for
Select id
roketsanuser.registrationnumbers® systems
where reg.id = regid;
end;
And I define in the annotations in my entity class:
@Entity (name = "Number")
@Table (name = "REGISTRATIONNUMBERS")
@SequenceGenerator (name = "REGISTRATIONNUMBER_SEQ", sequenceName = "REGISTRATIONNUMBER_SEQ")
@org.hibernate.annotations.NamedNativeQuery (name = "SP_GET_NUMBER", query = "{call? "{= SP_GET_NUMBER (: departmentId,: userId,: documentTypeId)}"
Callable = true, readOnly = true, resultClass = RegistrationNumber.class)
@EntityListeners ({BaseEntityListener.class})
Number/public class extends BaseEntity
I call the query in my Dao class:
public number getNumberForIncomingPaperworkByStoredProcedure (EntityManager Manager, number number)
{
A session = (Session) manager.getDelegate ();
query org.hibernate.impl.SQLQueryImpl = (SQLQueryImpl) session.getNamedQuery ("SP_GET_NUMBER");
query.setParameter ("departmentId", ObjectUtil.isNotNull (registrationNumber.getDepartment ())? registrationNumber.getDepartment () .getId (): "");
query.setParameter ("userId", ObjectUtil.isNotNull (registrationNumber.getUser ())? registrationNumber.getUser () .getId (): "");
query.setParameter ("documentTypeId", ObjectUtil.isNotNull (registrationNumber.getDocumentType ())? registrationNumber.getDocumentType () .getId (): "");
Collection list = query.list ();
return new RegistrationNumber();
}
But when I run the application exception occurred:
< 01/02/2013 10:04:24 EET > < opinion > < Stdout > < BEA-000000 > < hibernation:
/ * name of SP_GET_NUMBER native SQL query * / {call? = SP_GET_NUMBER (?,?,?)} >
< 01/02/2013 10:04:27 EET > < opinion > < Stdout > < BEA-000000 > < 10:04:27, 811 ERROR [IncomingPaperworkMBean] EJB Exception:; nested exception is:
org.hibernate.exception.SQLGrammarException: could not execute the query. nested exception is: org.hibernate.exception.SQLGrammarException: could not execute the query >
This is perhaps the reason why, please help me?
Thanks in advanceMessage to research in syntax of:
@org.hibernate.annotations.NamedNativeQuery
It seems that following is a possible cause (but I'm not sure about this one):
Query = "{call?" "{= SP_GET_NUMBER (: departmentId,: userId,: documentTypeId)} '.
You can change this:
Query = "(?)". (= appeler SP_GET_NUMBER (: departmentId,: userId,: documentTypeId)) "...
or
Query = "(call SP_GET_NUMBER (: departmentId,: userId,: documentTypeId)).
and check if that helps...
You can take a look at:
https://Forum.Hibernate.org/viewtopic.php?p=2401604
HTH,
Bravo!
AJ
Maybe you are looking for
-
Import of images from the iPhone 6 s
How can I import the photos from my iPhone or the iCloud and record a memo card?
-
What laptops will run Office2007?
We will soon be deploying Office 2007 Std. For our desktop computers that we replace everything with a less powerful than a P4 2400 MHz processor.However, the situation with the laptop processors is less clear. Some of our Toshiba laptops have Celero
-
Z400: Z400 firewire pinout of the connector?
I noticed that the connector on the front panel 1394 connector 12 pin rather than the standard 10 pin. Does anyone know the pinout? It is not in the maintenance manual. Thank you!
-
I tried to download Itunes, but I get it blocked because of an old version of Hello I can't remove it from my computer. Can anyone help?
-
The SWR30 is really waterproof up to 1.5 m?
Went swimming today and now I can barely hear anyone on the speaker. On the highest volume, they are as strong as the speaker internal speaker on my Z1C (that is to say, barely audible unless I hold the SWR30 against my ear). Anything less and they a