Apple will never allow iPhone users to connect to their Apple TV via Bluetooth, and the remote app?
I am frustrated because I know that the iPhone can connect to any Apple TV via Bluetooth to "auto set-up" but when it comes to linking in general, apple specifically denies this functionality to users. I would use this feature because I use my AppleTV for travelI obtained and I would make a transfer to wi - Fi password. I can access Wi - Fi without needing to put distance with me.
Download the Remote by Apple app on your phone.
Tags: Apple TV
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
Yes, I'm doing exactly this with the same put in place.
If the problem persists the next relative to the following articles might help you.
My Apple TV remote broke so I use the Remote App on my phone, but we recently got a new router and network connection and so now it is impossible for me to use with my Apple TV because I can't update the wifi settings so that it can connect to the new wifi... How should I do? I can't update the wifi because I need the TV and my iPhone to be connected to the same wireless network for do, which is impossible. Appreciate any help!
Use the remote device provided with the ATC to access settings and change the information of WiFi.
How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?
You do not have. This isn't a feature of iOS. It has never been.
connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057
Best regards: John
-Do you have Bluetooth devices internal or external connected to the laptop?
-Have you checked if all the Bluetooth drivers on two laptops are very well installed?
-This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
-Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?
I suggest you to go through these below items that could help you to fix this problem.
The problems with Bluetooth devices
Set up a Bluetooth compatible device
Hardware devices not detected or does not
I hope this information helps you!
Quite simply, I'm setting up my xbox live to run through my internet connection of mobile.
When I select the check box to allow other users of the network to connect through this computer's internet connection it turns off immediately, so is not enabled.
I tried disabling the firewall etc to see if it limited the ability of sharing, but it did not work.
Any information or help would be greatly appreciated.Hi Stewart,Please go through the article below which will help you to connect to windows live using your internet connection for your laptop.How to connect your Xbox 360 wired controller to a computer running Windows
Please also see the link below. This could help you.
http://support.Microsoft.com/kb/978618If the problem persists, I suggest that question you post you to Xbox forums.
I need to allow a user (not root) to connect to a server ESXi 4.1 via SSH.
The ESXi server is not a member of Active Directory.
I have read the article on the http://kb.vmware.com/kb/1024235 page and created a new user.
Then I opened the inventory, choose 'Add Permission' and adds the new user with the role of administrator on all of the inventory.
When I try to access it via SSH using the user name and the password of the user I get "access denied".
I think I missed a relevant step because if I open the inventory again and select ' add permission "the list of users with the privileges granted is empty and I don'tI do not see the user in the list of users with permissions."
However, if I use the vSphere client I locon as a new user and perform all the administrative tasks of ther.
- What step am I missing?
- As my user should only use SSH to perform actions on a given virtual machine, I can great administrative rights only for the virtual machine without rights to granding to all inventory?
- Is there a more detailed documentation for referred to?
Why not use powercli to create a snapshot of the vm? http://tech.mikeal.com/Blog1.php/2011/01/21/VMware-PowerCLI-scripts-delete-all-snapshots-create-new-snapshots
- What step am I missing?
How can I activate my BLUETOOTH on my laptop? He cannot receive a file becauce he can not allow a device to connect... My bluetooth mobile device is detected but is not active and cannot be discovered?
Hi najla treas.,.Since you have not mentioned your OS version, I'll give you a general/generic resolution.Please check the links below and follow the steps on how to make your detectable bluetooth.If it helps, let me know.Jaycee
Does anyone know if view Horizon be configured in such a way that:
-Two (or more) users can connect on the same desktop
-vSGA can still be used
The reason why I ask, is that in my area there is a request for collaboration in which two people on different locations want to go through a 3D medical treatment plan and discuss on the phone. Documentation of the Horizon does not say that it can, but it does not say that he can't.
There is nothing on the Horizon that would in native mode. You must use a product type to have two people viewing the same third party screen sharing office.
I had the two work 15 "MacBook Pro (retina, early 2013) Mac OS X v10.10.5/Yosemite) and 64 bit W7 EE SP1 to a Thinkpad Lenovo W530 to pair with the iPhone to work 6 (iOS v9.3), but they do not connect. The iOS from iPhone Bluetooth said no "connected". I want to just copy my files between each image.
Connection of Mac OS x before trying again to 64 bit W7. If I click on the name of his MacBook, it said "unsuccessful connection - make sure that 'computername' is active and within reach. Mac OS X says 'Not connected' to 'iPhone 6"working device. Double-click on "network is unavailable. Make sure that network access is enabled.
W7 64 bit, I say its Bluetooth and find matching the iPhone detected 6. I see the iOS device. Yet once, "not connected". HOWEVER, it says "Connection failed"ComputerName"is not supported." and forget this device. WHY?
Why orders wireless is so difficult? USB cable was easy.
Thank you in advance.
This has never been a feature of the iPhone/ipad/ipod
Bluetooth is supported for hands-free phone features, speakers/headphones, some keyboards a few apps from the app store and the interest of home - if it is provided by the carrier.
It doesn't connect to other phones, computers
I feel like this is a stupid question, but I can't for the life of understand me. I have an iPhone running iOS 9.1 5. I just bought a Sony CMT - X5CDB hi-fi Mcd289.
It has built in bluetooth. I followed the instructions to associate my phone and listen to music from him, but he does not ever appears on the phone as a device for me to choose.
Sorry to hear that you can't associate your iPhone with your Sony's Hi-Fi speaker. We'll see what can be done to get it paired.
I would first start by taking a look at the troubleshooting below sketch. Start by making sure that your devices are close to each other, restart your iPhone and speaker ensure that your iPhone is updated to bring them to see each other.
First try these steps
- Make sure that your device iOS and Bluetooth Accessory are close together.
- Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
- Restart your Bluetooth accessory.
- Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
- On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
- Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.
Let me know if it helps.
Original title: passwords lost after reboot
I have a user with multiple pop accounts and multiple rdp servers to which it connects
When the laptop is connected to the domain he is allowed to save the credentials of rdp as usual and also its pop accounts work fine
If the laptop is removed from the dock and hibernating come off hibernation works very well
the problem starts when it restarts in fact the laptop when it is on the road.
When he goes in outlook passwords for pop account are lost and all its Remote Desktop connections is no longer have recorded identification information
his outlook passwords will save is no longer and rdp connections will save is no longer
Once he returned to the office and connects back to the field all his pop account passwords are restored, the credentials of the rdp remain missing, but it can re - save them
any ideas where to look for problem
I also noticed inot laptopn with another user and will not experience the issue
Hi, Robert Allen,.
Thanks for posting your question in the Microsoft Community Forum.
According to the description, you have a user facing problems with multiple pop accounts and rdp credentials when the connection / disconnection of a domain.
Since the problem is associated with multiple pop accounts and rdp credentials when the connection / disconnection of a domain, the question you posted would be better suited for the IT Pro on TechNet public. I would recommend posting your query in the TechNet Forums to get help:
It will be useful.
Let us know if you need help with Windows related issues. We will be happy to help you.
I was watching netflix on my iPhone and then I suddenly noticed the screen get a slight green tint to it. I go to the home screen and notice that it is all green and the image is blurred. I did not drop the phone, so I don't know what's the problem with him.
First of all restart the device by holding the home and power button until the Apple logo appears. If the screen is always off color take your device at the Apple store, that she be evaluated. Your device may still be under warranty. If there is a problem, Apple will repair or replace the unit. Do it now while the warranty is still in effect.
Apple Watch with bluetooth
Apple Watch can still be used in conjunction with the matched iPhone (which is based on cellular services) in places where there is no Wi - Fi network.
The availability of some built-in and third-party applications can vary, depending on your cellular data settings and a network of cellular data speeds.
If your question relates also to longer term, it is not currently possible to update the software on Apple Watch unless the paired iPhone is connected to a Wi - Fi network.
Some built-in functions of Apple Watch can still be used even when the pair iPhone is not available via Bluetooth or Wi - Fi.
I was unable to get the new application Apple TV to pair with my iOS devices. Or see the other. I have Apple TV via the Ethernet cable is plugged in (4th gen). It has network and internet access very well. Must be on wifi to sail with an iPhone or an iPad? Google searches have turned up nothing so far.
Apple TV can be on wifi or ethernet, it makes no difference. However, they need to be on the same network.
Maybe you are looking for
Hello I want to do all my black plots, when I do this in my VI running, get errors, because the number of plots is not always the same... So I made a table to initialize and then try to colorize my plots, but it won't work...? Anyone?
the buttons can be configured to have the discrete steps?
My printer worked flawlessly for a little more than 2 years, and without visible reason to do it, now folds of paper for almost every print job. When I print from an application (Word, WordPerfect, Excel, MS Paint, etc.), it is a page scale crinkle a
I can't post a background for my desktop, my computer doesn't even gives me the option, I can only choose solid colors that come with all of the other computers... but I can have a screen saver and change my themes, just not a background... someone a
I have an asscoation of files for Python scripts. I type: > myscript.py and Windows running 'python.exe myscript.py' python.exe being the file association for the *.py files. However if I type: > myscript.py - option Windows still running "python.ex