Apply a filter to several frames together

Similar Questions

• Apply the filter at several layers at the same time (without converting them to a CG)

  Hey everybody,

  I looked everywhere for a way to simply apply the same filter with several layers at once, without first convert to smart object. I need to keep my layers intact and separated from the others. Does anyone know of a script or a way to do this?

  Any response is appreciated.

  -Andy

  Paul has a script "Filter selected Layers" on the site that makes the most of the filters.

  It's at the bottom of the "CSP Scripts" section.

  http://www.PS-Bridge-scripts.TalkTalk.NET/

• link to an interactive report AND apply the filter for 2 items.

  Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.

  Here is my code

  I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.

  A filter = > works very well

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Scenario 2:

  Two filters = > does not

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Thanks in advance

  actually the syntax wrong values in the syntax of the passes to several elements.

  is

  f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678

  Use above scenario and verification.

  Go

• Need help to apply the filter in my query

  Hello
  
  I have impact records in my table. These impacts are of two types, a normal incidence where I impact flag N and other altered impact where I impact flag Y. These impacts can have several status as 1. 2 cancelled. 3 closed. Open, etc.
  
  A single frequency can have several plan to fill that and more this plan contains multiple activities.
  
  Now I have to apply a filter to my report of the Sub conditions.
  
  I want to show all the records the impact of normal incidence.
  exclude impact modified records where status impact = cancelled
  exclude impact modified records where status is closed and there is no date of completion of the plan
  exclude the impact changed records where activity status = canceled
  
  
  Your help will be greatly appreciated.
  
  Thank you
  Shantanu

  Hi, Shantanu,

  That's what you asked for:

  SELECT    *
  FROM       table_x
  WHERE       incidence     = 'N'
  OR       (    status               != 1     -- Cancelled
         AND  (   status           != 2     -- Closed
              OR  completion_date     IS NOT NULL
              )
         AND  activity_status          != 'Cancelled'
         )
  ;
  

  Among other things, which means that the status and activity_status are never NULL. If it is not NULL, the solution is a little messier, but only a little: instead of things like

  status   != 1
  

  you have to say

  NVL (status, 0)   != 1
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• apply the filter sketches without changing the color of the photo

  I want to use some filters in photoshop, those in the drop down filters.
  I was wondering is it possible to apply a filter like pencil tale of half-hearted or something without changing the colors in the original photo?

  Hope it makes sense

  Thank you!

  Duplicate the layer, the filter, and then together a blend mode of 'brightness '.

• It does not apply the filter to the Tables to LAST_DDL_TIME.

  I am trying to apply a filter to the registration of a user table (me!). Open the dialong box I chose for the column LAST_DDL_TIME, ' > = ' as the operator and type in "(sysdate-30)". " Although registration of the tree said "Tables (filtered)", I still see all the tables listed. I tried several combinations, and nothing seems to work for the LAST_DDL_TIME. I don't get either all tables or none at all. Filtering by object_name works fine however.
  
  If anyone else has noticed the problem or have an answer? I use version 1.5.1.

  I never tried the filtering by the LAST_DDL_TIME option, but with a little experimentation is basically the same thing that you found (all or nothing). I went on tracing and found that it implements the LAST_DDL_TIME filter as follows:

  WHERE TO_CHAR (LAST_DDL_TIME) > =: LAST_DDL_TIME

  In view of this, except if you set NLS_DATE_FORMAT for something that sorts the same date as the character (IE AAAA/MM/JJ HH24:MI:SS) and then use the format of your LAST DDL TIME value (must use actual values - cannot refer to the sysdate), then it will not work as you wish.

  For example, I put my the Date format of the NLS (Tools > preferences > Database > NLS parameters) to YYYY-MM-DD HH24:MI:SS, then added a filter LAST_DDL_TIME of LAST_DDL_TIME > = 2008-11-04 00:00:00 and I got the same list of tables in a query USER_OBJECTS OBJECT_TYPE = 'TABLE' and LAST_DDL_TIME > = trunc (sysdate).

  theFurryOne

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• apply the filter command button does not

  Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works.   Array is not be filtered:

  {} public void applyTableFilters (ActionEvent actionEvent)

  FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();

  QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);

  myTable.queueEvent (queryEvent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  < af:commandButton text = "ApplyFilter".

  ID = "applyFiltersCB" styleClass = 'blue '.

  actionListener = "#{viewScope.myBean.applyTableFilters} '"

  Binding = "#{viewScope.myBean.applyFilterCB} '"

  immediate = "true" >

  < / af:commandButton >

  < af:table value = "#{bindings.myList.collectionModel}" var = 'row' "

  Rows = "#{Bindings.myList.rangeSize} '"

  emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".

  fetchSize = "#{bindings.myList.rangeSize} '"

  disableColumnReordering = "true" rowBandingInterval = "1".

  inlineStyle = ' height: 400px; "

  filterModel = "#{bindings.myListQuery.queryDescriptor} '"

  queryListener = "#{bindings.myListQuery.processQuery} '"

  filterVisible = "true" varStatus = "vs."

  selectionListener = "#{viewScope.myBean.currentSelectionListener} '"

  rowSelection = "#{viewScope.myBean.rowSelectionMode} '"

  ID = "t1".

  Binding = "#{viewScope.myBean.MyTable}" >

  < af:column sortProperty = 'year' filterable = "true" sortable = "true".

  shortDesc = 'AnnΘe Prg'

  headerText = "Year" Prg"id = 'c4' >

  < af:outputText value = "#{row.yearCode}" id = "ot6" / > "

  < f: facet = name 'filter' >

  < af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "

  value = "#{vs.filterCriteria.yearCode} '"

  maximumLength = "5" >

  < / af:inputText >

  < / f: facet >

  < / af:column >

  ......................................

  < / af:table >

  Appreciate any help.

  Finally it worked.    The question is the table PPR using backing bean does not display the filtered data rather than it shows full data.  If I use UI PPR, then apply filter method works very well.

• Runtime Error 21 trying to filter &gt; render &gt; photo frame

  Hey all, I get a runtime error when you use PhotoShop 2015 CC for the Mac on Yosemite. The problem occurs when I click on filter > render > photo frame.

  

  The error is "error 21: undefined is not an object." Line 600. "-> If (win.panels [pl] [ml] .menu. var1.enabled == enable).

  The error is now comes with new projects as existing projects. Difficulty please!

  This is a known bug. It will be difficulty soon. Here is the work around the engineer who wrote the script:

  The solution is to delete the Custom.xml in the user presets folder and try

  do not use the #37-41 chassis until Adobe releases the next update.

  The predefined folders are found below. But some files may be hidden and

  It may be slightly different on a different version of windows.

  Under windows, the easiest way to open the folder would copy the line below

  and paste it into the directory on a file browser box.

  Windows7, 8

  \AppData\Roaming\Adobe\Ad C:\Users\[user NAME]

  Photoshop CC OBE
  2015\Presets\Deco\Frame

  Mac
  /Users/ [USER NAME] / Library/Application Support/Adobe/Adobe Photoshop CC
  2015/presets/deco/framework

• Help! When you apply a filter "Fluidity" in the picture - objects of art.

  When you apply a filter " fluidity" in the picture - objects of art

  Front

  

  After

  

  Hi AlexSecstasy,

  The problem with the Liquify Filter has been fixed in the latest update: Photoshop CC 2015.1.1. Learn more about the update here: keeping up to date of Photoshop

  Thanks for posting and your patience!

  Melissa

• Help needed to apply the filter condition

  I need to apply a filter condition based on the database environment:
  1. only if the database name is UAT tb1. > 23 - OCT-2012 CREATED_DT.
  2. only if the database name is OATS then tb1.application_no in ('1 ', ' 2')
  3 If the database is a different database then these conditions do not apply.

  Try this

  Select  tb1.*,tb2.* from tb1
  join tb2
  on (tb1.col1=tb2.col1)
  join (select  case when global_name='UATDB' then 'UAT'
                           when global_name='QATDB' then 'QAT'
                           else 'OTHERDB' end DB_NAME  from global_name) DB
  on 1=1
  where (DB.DB_NAME='UATDB' and tb1.CREATED_DT > 23-OCT-2012)
  or (DB.DB_NAME='QATDB' and tb1.application_no in ('1' ,'2'))
  or (DB.DB_NAME='OTHERDB');
   
  

  Note: not tested code

• How can I apply an action to several images in CS5?

  How can I automatically apply an action to several images in CS5?

  Hello, welcome to the forum.

  If you are talking about a Photoshop action, you can use bridge, select the files and use the tools > Photoshop > batch, or, if you need also to save in different formats, tools > Photoshop > image processor.

  

• Image not updated after you apply a filter in CS6

  Image not updated after you apply the filter to the CS6. Preview is generated, but filter does not apply. Very sporadic so I guess this could be a problem of memory. Help on Win7, AMD Phenom II, with 8 GB of memory.

  Post edited by: claytor1999

  Yes - thank you! It seems to turn off graphics solves the problem. Appreciated.

• Changing the shape of several frames

  I created several frames, using the tool polygon framework, in the form of octagons. Is it possible for me to change all the boxes? Even a change by one would be fine with me, I don't want to have to recreate all of them from scratch.

  Thank you!

  It's easy. Select them all and choose object > convert shape > Rectangle.