Driver for Keysight 34461 A DMM instruments works with GPIB, errors with USB

Similar Questions

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• is there a driver for the faxphone l80 printer that works with Vista home edition

  Identical to the subject

  Hi RayBlack.

  There is a driver available for the 32-bit version of Windows Vista, however, the L80 doesn't support printing on the 64 bit version of the Windows operating system.  You can download the driver by clicking on the link below:

  FAXPHONE L80 - software and drivers

  Click on the drop down arrow to [Drivers] and select the fax printer driver.  Select "I agree - Begin Download" to download the driver.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.
   

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• A drive enclosure hard card SBT-EKU25 will work with a Toshiba Satellite L355D?

  As the title indicates, I would like to know if a Sabrent SBT-EKU25 ultra slim USB 2.0 hard drive 2.5 inch pregnant will it work with my Toshiba Satellite L355D model. I've never used a hard drive enclosure before and I just want to be sure that it will work with my computer before buying it.

  The housing of the hard drive, it also says IDE/PATA, but I know not really knowing what that means. I would be very happy if someone would inform me on that as well.

  Thank you for your time.

  MissSakura.

  Hello!

  I don't know, but as I know that this model comes with a SATA (Serial ATA) hard disk drive & enclosure is PATA (Parallel ATA), so it won't work. but you can try and take your laptop to a computer guy and ask him to be sure if the hard drive can be adapted to your external case. Also, if it is a SATA hard drive you can always go for an external SATA enclosure.

  Concerning

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Double post please see also /questions/925441 #answer - 326583

• Need for Speed Hot Pursuit 2 will work with Windows 7?

  Need for Speed Hot Pursuit 2 will work with Windows 7?

  Click on the following link for the game compatibility in the Windows 7 operating system.

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

• 4clipika for satluj police (Punjabi) does not work with windows 8

  R/Sir

  4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

  BSwakaf

  I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

• Message: this device could better work with usb 2.0 when you connect the USB device.

  Original title: USB 2.0

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  To answer your question directly: you replace with USB 1.0 (most likely USB 1.1) USB 2.0 by the purchase of new equipment.

  If you have a desktop computer, you can buy an internal with several Sockets USB 2.0 card.

  If you have a laptop, you can get a card with 2 ports USB PC Adapter 2.0

  Before you buy anything, however, if you have a desktop computer, it is possible that some (but not all) of your taken USB is 2.0.  Open the Device Manager (start > run > devmgmt.msc > OK), click on the + sign next to the category "Controllers of Bus USB" and watch the 'Host controllers' listed there.  If any host controller is 'enhanced' then you have at least one (and probably 2) USB 2.0 taken somewhere on the computer.

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Conversion of SSD drive for the reader to boot on m7 with Win8

  I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

  The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

  The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

  So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

  I don't know what the problem is.

  What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

  I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

  Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

  Any ideas out there in the land of the experts?

  Vachsen wrote:
  

  Thank you, erico, for advice.

  I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

  So far, I've done everything suggested this that caramel:

  -Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

  -Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

  -Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

  -The series 160 GB 320 firmware was up to date.

  -Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

  -Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

  -Enabled secure boot.

  Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.

  
  

  When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

  A number of things, I noticed I did upgrades:

  -The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

  -The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

  Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

  Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

  The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

  The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

  You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

  The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

  Dan

  Intel also recommends the free use of third parties such as cloning utilities

  http://www.EASEUS.com/disk-copy/

  http://Clonezilla.org/downloads.php

  http://www.partitionwizard.com/products.html

  EASEUS is, in my opinion, the best of the three.

• Ethernet passthrough for station host UltraSlim does not work with Folio 9470 m

  I have a new Folio 9470 m Win7 64 bit running.  I'm tying to a Docking Station UltraSlim

  The port ethernet on the Folio works very well and I am able to connect to the local network in the office without problem.

  However, when I connect the Ethernet cable to the docking station and then place the Folio on the docking station, I am * not * be able to get a connection.  The link on the docking station lights will not Flash again.

  The dock is connect to power and the lights are on.

  I also have an external monitor, mouse and a wireless headphone wireless connected to the docking station.  It all works perfectly.

  Any suggestions?  I'm completely unable to find a driver for the folio, which would be connected to a docking station.

  You can get a better response in the company support forums located here.

• Driver for Sharp AL-1530CS that are compatible with Windows 7

  I had the same problem but with a printer of AL-1661CS and was able to resolve it with the help of Sharp.  They directed me to a Polish website to download the driver for Vista 64-bit.  Here is the link: http://esupport.sharp.pl/html/driver/index.php?ProdLine=34&TemplateLang=en

  After installation it only recognized as a scanner, but then I went to update the driver automatically and it finds the driver and I'm able to print.

  Hope that helps...

  Well, he sure give me and the opportunity to try to find a driver for my printer but it also showed me that Sharp should have abandoned my Copier years until I bought it! He was not a 64-bit driver or 86 bit pilot planned for the copier to al-1530cs and Sharp is not even considering what makes a. And it's sad because they deal with technology rather than waiting for people to buy a new.

  While I can't make the Church, that I work buy a new copier that I have the power to make sure that they never buy another one built by Sharp. And while I'm Pastor here they will never.

  Thanks for all the help you gave me. At least I feel like I tried as hard as I could to find a driver. And who knows maybe Microsoft will think about an update a day that will make a normal XP compatible driver for a 64-bit Windows 7!

  Thanks again and always to remember that we did our best!