Similar Questions

• How to convert AVI files for first CS4 (Mac) with VLC - Please Help!

  Hi thanks for the reading-post it here for the first time.

  I'm another grass sorry, trying to convert AVI files, so I can import them into first CS4 on a Macbook Pro laptop. I am using VLC on the macbook to perform the conversion. I don't want to use free converters such as iSquint (tried and many others) b/c they cause a significant loss of video quality. But I'm trying to do it for free! (I'm broke).

  Been read tons here and on other forums to get advice first, but in my view, none is really specific to my situation.

  I'm fine (slight quality loss) video but NO Audio. I want the audio too!

  AVI files seized on an old NV3 camera SD card.

  VLC said the Codecs for these files I got off the SD card are as follows:
  0 workflow:
  Type - video
  Codec - MPEG - 4 (XVID) video
  Resolution - 640 x 480
  Rate - 30

  Stream 1:
  Type - Audio
  Codec-MS ADPCM (audio ms)
  Channels: Mono
  Sampling frequency - 22050 Hz
  Bits per sample - 16

  I tried several different configurations with VLC conversion according to the documentation of "Supported file Formats for import in first CS4": http://help.Adobe.com/en_US/PremierePro/4.0/WSf52ca809ac8f6c7135876f961243120b72d-8000.htm l

  For example I tried to convert the same file as follows:

  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 192-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/MPEG Audio 128-bit
  Wrapper MPEG 1 - converted with MPEG-2 VID 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MPEG Audio 16 bit VID
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MP3 Audio 16 bit VID
  
  When converting to MP4 (MPEG-4) I get a general error while importing first so no dice on that, and I tried a lot of other configurations/combinations, but not all. 

  I check each result with VLC before import into the Prime Minister and they play both audio & video fine with VLC.

  My question is the following: what settings can I select in VLC for audio first? Or if there is a specific codec I need to download and install a download link... would be much appreciated.

  Alternative solution?...

  If I put these files on the SD card in my camera and click on and drag them on the macbook pro laptop as AVI files (instead of dragging to a PC first, as was the case)... don't you think it would make a diff?  Also, I tried sucking to the top of the camera first, but that didn't work... the camera turns on when connected to the computer... so that you can not navigate to a file on the camera and then use the GUI first to suck.

  I have a laptop. These original files play well with Windows Movie Maker because I downloaded the appropriate codec. Hi and low tried a mac version of this codec without result. CS4 my install discs do not work on Windows/PC. Trust me I wish they did! Even the configuration required on the package is in the absence of any mention of Windows. Windows Movie Maker convert .mov... that was my first game b4 plan, I realized that VLC was quite robust and user-friendly in its Export Wizard codec functionality.

  Any help would be much appreciated! I swear! I'm banging my head against the wall and I want to just change already!

  Thank you!

  Do not use the flow function; This isn't what you are doing.  (Although technically, I don't think it matters)

  Use the convert/save option.  The first screening, video - H.264 + AAC (MP4), should work great.  Don't change anything.  Save the file with a MOV or MP4 extension.

  If you get audio weird sounding, then create your own preset that matches the Video - H.264 + AAC (MP4) preset, uncheck only Audio the Audio tab and convert to video.  Then run convert/Save using the Audio - CD preset.  Save the file as a WAV (or an AAC?).

  Import the 2 files into PR.  You shouldn't have synchronization problems if the points are aligned in when you add them to the sequence.

  -Jeff

• Expanding Cross dissolves on mov. the files cause first crashing?

  Hello Adobe community.

  I was wondering if anyone else is having the same problem;

  

  

  Strangely, this happens when dragging multiple clips with a cross dissolve (and sometimes even simply by dragging a clip it freezes).

  I already tried to create another project file in another scenario, but the error still appears. I have to work around by removing dissolves it and then adding them later.

  Hope anyone can help with that, or at least fix the bug.

  -John has.

  Try to export a PNG image instead of use the frame to hold.

• How to export files video first Pro CC 2015 according to Effects CS6?

  The choice of dynamic link in the file menu is grayed and I can't replace with After Effects Composition when I right click on the video file in the time line.

  Dynamic Link only excist between applications of the same version.

  You need to export with a mid-range codec if you want to use CS6, otherwise install AE2015.

• How to convert/export a file HAVE to be functional in MS Publisher

  Hello

  
  

  I need to convert my file HAVE to be compatible with MS Publisher.

  It must also be able to be modified more (color filling Forms).

  Can I save/export the file to a certain format that would help me achieve this goal?

  
  

  Thank you

  Harrison
  

  Your question is a bit like asking, "How can I convert my Mercedes Benz to use Hyundai parts?"

  The best you'll do is save in PDF format, then use a PDF to PUB converter, many of which are available (Google "convert PDF to PUB"). Be ready to make repairs and the compromise in the Publisher file.

• The numbers don't convert/export of files in Excel

  Spin Numbers ' 08, Version 1.0.3

  OS X Version 10.10.5, Yosemite

  I started by spending eight hours per person in total entry of data into a new file numbers "clean". Once completed, I needed to share this data with anyone who has only Excel. So I thought I'd just to export this file in Excel and send it to him. But...

  When I try to convert a file of numbers in Excel, data I click file > export > Excel, Next > select the destination > export.

  I get the error message: "Error exporting the file 'nom_archive' could not be found."

  Where 'filename' is a file I probably had on my hard drive a few years back, but is long gone.

  I tried cutting all the data of the file numbers I'm trying to convert to and paste into a new file numbers. Same error message.

  Anyone ever heard of this, or knows how to get around it?

  I have not heard of it, but another option would be to open the document numbers, select all and copy paste into a spreadsheet of LibreOffice, then save in Excel format. You can download and install LibreOffice toll-free and it has excellent compatibility with Excel: https://www.libreoffice.org

• Windows Movie Maker - convert wmv files

  How to convert windows movie maker files wmv files

  How to convert windows movie maker files wmv files

  ==========================================
  Project Windows Movie Maker .mswmm files are you referring?

  To publish (save your project .mswmm to .wmv format files)...
  See the following articles:

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why do I get a 0 byte file during the export of the first 13 items?

  If I choose to export it to a file MPEG, the results look ok, but when I choose AVCHD with the setting below, I get a 0 byte .mp4 file after first made for quite awhile

  

  _______________________________

  Gunnar

  One last thing to try.

  Go to the preferences of the program, under the Edit menu. On the general page, uncheck the use hardware acceleration.

  Click OK to close the window and try to publish & share.

  This little feature was at the heart of some failures of file DVD.

• Flash animation is not export file in the first

  I don't know why I can't export a file from Flash animate at first; When I do, a window, who say it didn't is no any aviable audio/video streams, appear.

  Do you now how I can solve the problem?

  Thank you

  If you are on Windows, you have installed QuickTime? Are you able to view a file somewhere, if I try to export to the first with your file?

• I have a HP PC. I ordered export them to Adobe PDF format and whenever I try to convert a file, I find myself on the command screen?

  I have a HP PC. I ordered export them to Adobe PDF format and whenever I try to convert a file, I find myself on the command screen?

  Hi Judy Wooters,

  Please try to connect to "http://cloud.acrobat.com/exportpdf" using your Adobe ID credentials, and then try converting the file.

  Let me know if your problem still persists.

  Kind regards

  Ana Maria

• convert a file from .cube (resolve) in Speedgrade to fall in the first

  Trying to convert a file .cube (cube has been created at will) in 2015 Speedgrade to then drag the file on my video editing in first 2015.

  Anyone who has knowledge of this?

  The workflow I think that it had carried out since the first 2014, lumetri import in the first in the effect controls panel > video effects > color correction > lumetri snd which would open browser operating system for guide way to ' select a glance / LUT

  Who changed the first to import the first LOOK in 2015. lumetri > color > creative > look > pop-up window > [custom] or click Browse that launches the operating system file browser

  As to convert the cube - it just will be important in first by guiding the file as above States?

  Or

  as for Speedgrade, can you just save as a glance in your path of the selected folder, and then guide your look in the first?

  EDIT: other then that I paste link to associated message, I read once all the time and that it cannot absorb it currently adding of LUT to color Lumetri?

• What file format can I convert AVCHD to for first?

  With the help of Aunsoft MTS Converter to convert my AVCHD files but have NO IDEA where to start with the selection of a format. There are some parameters of the first, but there are options (quality, medium, high, etc.) and a few others. (Like Aunsoft so I can create a file among many others.)

  I am shooting in 1080 p 30 and just development of the training videos, so this isn't the stuff of Hollywood. Just try to get a nice HD, easy to change and easy to convert format.

  Can anyone recommend a default basic formula? Would be very happy!

  And you want to convert it why? First can edit AVCHD directly. Copy the entire contents of the SD card directly to the hard drive, then first, import using the functionality of the media browser, works like a charm. Maybe you have an older/more slower computer and it can't handle natively? You did not say

  Jeff Pulera

  Safe Harbor computers

• Virtual copies come first in the exported files?

  Is there a good reason why the virtual copies, coming after the original in the library file, are named in a way that causes them to come before in the game exported JPEGs?  IE - ogfile.jpg and ogfile - 2.jpg.  When sorting by file name, the virtual copy is the first!  This totally counter-intuitive.  The original files should get a suffix-1 or the virtual copy must be named in the order.  Or am I missing something?

  Lightroom uses the suffix "-2" to avoid name conflicts. The first pictures are exported with the file name that you set in the export dialog box. Since the two your master and VC were exported with the same file name - there is no way to avoid conflict, but to add a suffix.

  If you want your master to have a "-1" suffix, you can control it by choosing a model of export file name, which includes a sequence # variable. For example:

  -

  This will give you the expected results:

  • ogfile - 1.jpg
  • ogfile - 2.jpg

• Export files Temp CS5.0.3 on C during even with zero as E

  I have a small project that uses a lot of Photoshop files as graphical models. I thought that because I put my "scratch disks" to "E" whenever I want to export, it would use 'E' as my temporary location temp generated/required during export files. But for some reason, my exports have been crashing because I'm running out of space on my C drive during the export. I discovered that for exports, there are several TEMP Photoshop files being created on my C - each as 3 GB drive, ends up cluttering my drive c. (I confirmed that I put the backup made at E destination) after rendering/export, these TEMP Photoshop files disappear on C. This is expected behavior? Is there something obvious that I can do to make sure that all the files go on a separate drive? Thank you!

  

  

  Adobe, like many other applications use the Temp Variable Windows directory for cache files. For example, if you export out of first and select the queue to the Media Encoder, it will show the C drive instead of the drive where the support is in fact located with the project file. This is because the source is to see this media encoder is the Directory Windows Temp Variable. You can change this by creating a folder on the E drive called Temp. Then right click on computer and go to properties. Select Advanced settings on the left, click Environment Variables on the bottom of this Panel. You will see the 2 files Temp and the places that appear in the upper part of the Panel of Environment Variables. Select Edit and then type or copy/paste in the location of the temporary directory created on another drive. Example - E:\Temp

  Restart Windows, and then the Variable cache should move to this directory. Remember that Windows uses to allocate things. So if this drive is removed or do not take a lot of time at the start and it will start with errors.

  Eric

  ADK

• Moving files from first elements 8 PC for Premiere pro CS5 for Mac

  Hi, I am a new user of Creative Suite CS5 Production Premium on a Mac and I'm trying to open some of my unfinished projects of video from my old computer with Premier Pro. My old computer is a PC and I had been editing HD with first Elements 8 images, but I now have an equipped MacBook Pro which is much more suitable to what I was trying to do on my old computer, and I'd rather finish my projects on my new mac rather than on my old computer.

  I exported my workspace for the videos and the file of the elements, I was working on in folders and them moves on my Mac's hard drive. I read that first Pro CS5 automatically converts files of items when they are open, however, I get an error message about how they are files of a PC version of the elements and cannot be opened. My question is, is it possible to convert PC files first elements 8 into something that can be opened on the first Pro CS5 for Mac?

  PrE is only available for the PC. Unfortunately, there is no compatibility between PC GER (PREL) and PrPro on a Mac project files.

  It was the same with files in project PrPro 1.0, 1.5 and 2.0, because they were PC only and there is no Mac version, up to CS3. The only solution was that could get a friend on a PC with the CS3 version to open/import the PrPro 1.0-2.0 projects inside, let it convert and then make a Save_As. That the resultant project COULD be opened/imported in CS3 Mac. Compatibility is with PrE8 and CS5 - PC.

  Your choice is:

  1.) export rough-edited pre on your old PC files and then import those as assets, to finish editing

  2.) find a friend with CS5 - PC, import/open these project files PrE who, not a Save_As and then move the files to your Mac project

  3.) finishing editing on the PC

  Sorry for the bad news, but good luck.

  Hunt