ASA 8.0.3 vulnerable to attacks BACK TCP?
Can anyone confirm if the ASA 8.0.3 image is affected by the denial of service (DoS) vulnerabilities that manipulate the State of the Transmission Control Protocol (TCP) connections?
BACK of VPN on ASA is not affected on version 8.0.3:
http://www.Cisco.com/en/us/products/products_security_advisory09186a0080833166.shtml
However, you may be affected by the following vulnerabilities:
http://www.Cisco.com/en/us/products/products_security_advisory09186a00809f138a.shtml
Tags: Cisco Security
Similar Questions
-
device is vulnerable to attacks from hackers WNR612V2 NO-20125-0211
Avast gives me an error message saying that I need to upadate software/fimewear for WNR612V2
that I'm vulnerable to hacker attacks also any help would be appricated thank you
Hi @lucky43113
Welcome to the community!
The model number you have is already considered as end of LIFE.
There will be no more updates for this device and it is best to update your device to a newer model.
-
Hi all experts,
Can someone help if I need to simulate an attack on a server on the DMZ.
How know there is an attack on this server and how to generate attack?
Very grateful for the help on this.
Thank you.
Rgds,
To the Shaw feel Yeong
Hello
If you want to test your server, there are a number of things that you might need to do, simple attack complicated. It depends on what you want to achieve, attack type, for example, server operating system application.
But that simple could use ICMP/ping attack or attack SYN TCP (you can easily get tools on the Net).
Perspective PIX of firewall, you will probably need to active built-in IDS feature, limit the embryonic level and open ICMP to the target server. Make sure your ACL allows ICMP and authorized service port requests to pass through. In addition, make sure that you enable syslog and probably set for information or debugging, to capture the log.
PIX will easily pickup the ICMP attack based on the ID services, while for the attack of TCP - SYN (targeted to your application via ACL), you can see the attempts of the newspaper.
Rgds,
AK
-
If anyone can help with the Please this problem.
Hi handymanken,
1. what operating system do you use?
2. you have made no changes to the computer before the broadcast took place?
Method 1
If you have any security software installed on the computer it would take more time for the backup center to back up files. Try to disable security software and try to make a backup and verify.If it works fine afterwards, enable the security software.
Follow the link for more information
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2
Run the check disk for bad sectors.Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-a-drive-for-errors
http://support.Microsoft.com/kb/315265
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Additional information:
Backup and restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restoreShould what backup settings I use to maximize my disk space?
http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space -
How to enable protection against SYN attacks? my laptop is under this thread.
My Internet access to "ON" and "OFF". "» Help, please...
Hi abangmamat,
Thank you for posting. You can protect yourself against these types of attacks using Windows or a third-party firewall.
If you are vulnerable to a SYN attack, you can do the following.
1. click on start, then run.
2. in the run window, type 'CMD' and press 'OK '.
3. in the command prompt window type: netstat - n tcp PeiLook at the output for the entries in a SYN_RECEIVED State. If you notice several entries, your system is vulnerable to attack.
I hope this helps. After the back if you have any questions.
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Vista update fails, takes 30 minutes to come back!
It's been a week now, whenever I turn on the PC or reboot, Vista will update... 15 minutes later, I get the message (updates are not configured correctly, returning any changes... Do not turn off your computer) and then I have to wait another 15 minutes to get him back! Now, all I have in the start menu is: note pad, calculator and backup and Restore Center! It becomes very annoying. Please advice. It's windows Vista Home Basic, SP2, 32-bit.
Hi HeshamEtaby,
Thanks for posting your query in the Microsoft Community Forums!
Of after the description of problem that I understand that you can not install windows update on the windows vista computer, and it's back to the desktop.
-What do you mean "I have in the start menu of note pad, calculator and backup and Restore Center"?
This give a try.
Method 1
Run the fix of the article.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
Try to install the update in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 3 in the Knowledge Base article.Method 3
The problem can also be caused by your security such as anti-virus program that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable the anti-virus and check the result again. You must activate new security that you was disabled programs.
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareOnce we install the updates, please turn on the firewall.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 4
Refer to the help article and check if that helps.
Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://support.Microsoft.com/kb/949358#method3
Note: It is recommended to back up the data before you start the installation. Installation takes the same amount of time to make the upgrade to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
For your reference:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
Bad Image keeps coming back!
Hello world!
The power is out and since she came back I had problems with my computer.
Bubbles.SCR - bad Image keep appearing then
C:\Windows\system32\AVGRSSTX. DLL appears and then
MCCIBrowser.exe - Incorrect Image
Iexplore.exe - bad Image
Can someone help me get rid of recall errors.
Thanks for any help you can give.
Hello
1. what version of Internet Explorer you are using?
Please follow the methods.
Method 1:
Uninstall and reinstall AVG Antivirus and check.
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Please visit the links.
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
http://www.Avg.com/us-en/download
Method 2:
Run the tool file system from the link checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
-
How can I stop the update KB2644615 to come back?
Vista Home Premium 64
KB2644615 was part of a weekly update on 10/01/2012. I was able to install all other 14 updates that came with it, but it goes through the motions, then update fails and comes back. I'm now stuck in a loop. Please help me.
Thanx. Don
[Moved from Internet Explorer - browser version: IE9]
Hello
Follow these methods mentioned below and check
Method 1: Follow the steps mentioned in the article below, which deals with a similar question.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358Method 2: Follow the steps in the following articles.The problems with the installation of Vista updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesYou cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-filesMethod 3: You can temporarily disable your antivirus and then try to download and install the update.
Disable the antivirus softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Now, you can try to download and install this update manually.
Update security for Windows Vista (KB2644615)
32-bit - http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28656
64-bit - http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28696 -
I have an acer Aspire T180 and I can no longer go back to my hard Drive
I'm having some problems with the backup of my hard drive and the media pool shows this isn't a thing here
E-mail address is removed from the privacy *.
place help do you thinkHey O Dwayne,
· What happens when you try to back up?
· You get the error message?
· Use any third-party for the backup application?
· Have you made changes on the computer before this problem?
· What exactly you talk like a Media Pool?
Follow these methods.
Method 1: Temporarily disable the security software.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Check the status of dependent services backup. Follow these steps:
(a) click Start, type services.msc and press to enter.
(b) double-click Backup Windows and Volume shadow copy services.
(c) make sure that the startup type is automatic and the services are started.
(d) apply the settings.
Note: If the Volume Shadow Copy service is stopped all restore points will be lost.
Reference: http://windows.microsoft.com/en-us/windows-vista/Back-up-your-files
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
-
I do automatic closing his day, the computer has not been connected in recent years. 46 updates downloaded, when I turn it on it tries to configuire updated and fails. He then returned back. How can I solve this problem?
Hello
What is the accurate and complete error message?
Method 1:
You can see the knowledge base article and check if it helps:
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358Method 2:
You can stop the automatic update and install an update at a time and restart the computer to verify the update is causing the problem.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-offYou may need to temporarily disable the antivirus software updating.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks -
Back to the top: the files are not backed up on external hard drive
When I back up my hard drive to Windows Vista, the backup (which should include my documents) works about 30 seconds and it didn't save the file created on my external hard drive of diving. The hard drive is a Seagate 160 GB with about 90 GB of available disk space. I have my using the Windows Vista program upward.
Thanks for the help.
Hello
· Have you tried the same files and backup folder in one different location (another drive or media)?
You can check if there are errors listed in Event Viewer related to backup is not made. To open Event Viewer, follow the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
You can also try to disable the security software and then try to run the backup utility and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My wireless connection turns off randomly and I must turn back each time.
Original title: my wi - fi connection keeps turning off randomly and I have to reactivate using trouble shoot problems. How can I do to stop turning off by its self?
I just got this computer today. Connected to my wi - fi, but the internet connection turns off randomly by its self and I always have to use diagnose pushes hard problems do turn back on but it turns off again later and I must do it again repeatively. What should I do?
Hello
1. you receive an error message?
2. What is the brand and model of the computer?
You can follow the suggestions and check out them.
Method 1
You turn off registration for the Wireless Network Adapter.
a. Click Start.
(b) in the search box, type Device Manager.
c. expand network adapters.
d. right click on the wireless network adapter and select Properties.
e. uncheck the allow this computer to turn off this device to save power.
f. click OK.
Method 2
You can follow the procedure in the article.
a. Click Start.
(b) in the search box, type Device Manager.
c. expand network adapters.
d. right click on the wireless network adapter and select Properties.
e. click on uninstall the tab drivers.
f. click on apply and OK.
You can re - install the drivers for the wireless network adapter on the computer manufacturer site.
Method 3
You can disable the security software on the computer temporary.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Note: A firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
You can also see the article for more information on the issue.
Windows wireless and wired network connection problems
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Use Network Troubleshooter event logs to solve network problems
-
security vulnerability "deadlock" to the current version 38.0.1
Just got an email from freeware to gizmo describing a new threat to browsers, including the current Firefox.
Hello skp53106, it is more of a vulnerability that can be exploited in Web servers down to levels of encryption that are easier to break. a fix will land in the next version of firefox version to mitigate these attacks to downgrade the part of the browser.
so far, you could use this addon that disables the suite of encryption vulnerable to attack: https://addons.mozilla.org/firefox/addon/disable-dhe/ -
I see in my logs
[DoS attack: go Kill] source: 85.252.162.7, port 123, Monday, September 26, 2016 17:57:50
[DoS attack: go Kill] source: 195.154.174.209, port 123, Monday, September 26, 2016 17:55:03[DoS attack: RST Scan] source: 188.121.36.239, port 80, Monday, September 26, 2016 17:52:32
etc.
Is it really attacks back. Why would anyone back me, and how to avoid it or guarantee me the better of her?
Thank you.
So you say that these things are normal. OK, I don't have a slow network, so I guess I can stop worrying
-
I don't find Windows Firewall in my list of services. Where and how do I get it back?
I am running Windows VIsta. I am leaving a program through my Windows Firewall and whenever I double click the firewall icon in the Control Panel, it opens and tells me that I do not use recommended firewall settings and then I click on update settings and he know Windows could not update the settings. Then I click on the Windows Firewall enable or disable the link on the left side and he know "because of a problem not identified, Windows cannot display Windows Firewall settings. I searched and found a comparable discussion topic and opens the window to see what the settings were on it and start it manually if I had to but I can not even find the Windows Firewall Service in the list of services. Where it is and what can do to find it?
Hello
Do you have any third-party firewall installed on the computer?
Method 1:
Run the tool fixit from the link below and then search for the question.
Diagnose and automatically fix problems of Windows Firewall service:
http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
Method 2:
If you have any third-party firewall on the computer, it can disable the windows firewall. So, you can disable the other third party services that are installed on the computer.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacksYou can also try uninstalling the firewall installed on the computer and check.Method 3:
You can also perform a SFC scan and check.
SFC: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 7
http://support.Microsoft.com/kb/929833
Method 4:
Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING:
If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
See also the link to learn more:
http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
Maybe you are looking for
-
DAQmx how to control the level of tension AO paused for a relaxing break?
I have an application where I need to generate a waveform of a fixed frequency (~ 200 kHz) and the amplitude, but for differing them burst lengths and different lengths of time between bursts. These bursts and these delays are controlled by a line of
-
Wireless stopped working completely on WAG200G
Radio has stopped working completely on my WAG200G. I'm not talking only a weak signal. My phone or my laptop can see nothing even when there is only 1 m. Works always wired network and the wireless router lights, but they don't blink at all. I tried
-
Control the access of the user for the SSL VPN profile.
I have two ssl vpn profile, can I restricted the user to access only ssl vpn profile, when they get to the page of the ssl vpn service. Each profile to create different types of access, and they will have different client IP address.
-
How to retrieve information from the appellant in BPEL
I have a SOA - BPEL process that is consumed by the different systems. Purposes of registration, I need to retrieve the host name of the appellant for each request.Consumers are not cross any additional headers or special settings of WS-addressing.Si
-
Scalability EBS - Vertical and Horizontal
Hi allWhat do you mean by scaling vertically and horizontally?The figure presented here > https://blogs.oracle.com/stevenChan/entry/disaster_recovery_oracle_ebusiness_release_12Horizontal is on the side, it does mean adding multiple clusters of serve