Aspire 5253 series

Similar Questions

• I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 set up

  I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 put in place down, but only for a few seconds, then it goes very dark, almost impossible to see what is on the screen, but there is something.

  I connect a monitor to the VGA connector and th PC works fine.

  I've updated the drivers, but it shows always available, as the main screen attached to the was'nt PC he all of a single screen

  to detect not to bring, and isentified on ly show 1 on both screens, PC built in display still very dark, like the backlight is not on

  reboot always perfect watch on the screen for a few seconds then dark

  Thanks for help

  by chance, I moved the cable button / stop for the Office and the screen turned on

  I checked the cable, it was slightly broken by the brokrn hinge

  I just had to cable and now it works fine

• Acer Aspire 5253 Sluuggish acting

  I'm trying to fix Acer Aspire 5253 a friend. It came with Win 7, which has been altered, so I installed Win 8.1. He worked for a while and then refused to start so I reinstalled Win 8.1. It worked well, but now is sluuggish, taking too long to respond to commands from the keyboard. When I go online to a news article it freezes when I try to scroll to the bottom of the page. Windows says that internet Explorer is unresponsive. When I try to restore the same web page. This has happened on two successive days. I discovered after installing Win 8.1 that Acer does not support Win 8.1 for this laptop. However, it supports 8 Win, & I have been informed that Win 8.1 should work. I found scan with HD Tune recently that the hard drive has 40 bad sectors, according to the most recent analysis 41 today. Makes it sound like I should forget Win 8.1 and reinstall Win 7, buy a new hard drive, or is there another solution? Antivirus software is updated and a complete analysis of the system shows no malware. All Windows updates have been downloaded & installed. I tried to update all the drivers, but in each case, said that the best driver is already installed.

  buy a new HARD drive in my opinion.

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• How to reset aspire keyboard? Windows 7 aspire 5253

  HOW TO RESET HIM ASPIRE 5253 KEYBOARD? FAILURE OF THE RIGHT KEYPAD NUMRIC.  THE DEL BUTTON DOESN'T WORK SOMETIMES DOES NOT.

  Hello

  If you spilled anything on the keyboard?  Bring it in a warm room and let it dry.

  Start > all programs > Accessories > accessibility

  Select the on screen keyboard

  Use this option if needed

  If make sure that keys filters is not checked

  Click

  Start > right click on my computer

  Select manage

  Click on Device Manager

  Click + next to keyboard

  Right-click on the driver and then select uninstall

  Restart the computer

  Go to the manufacturer's website and search for updated driver

  Press Fn + NumLock

  Keyboard works now?

  If not works, you are able to remove the keyboard and try another to determine the keyboard is defective?  Can you reconnect the ribbon cable that holds up?

  If under warranty, contact the Acer Support for repair

• Acer Aspire S3 series off? Why does this happen?

  I have a laptop Acer Aspire which has served me well. The laptop turns off unexpectedly when it is on battery or plugged in.  The battery has been replaced twice, the fans and internal ducts cleaned, System calaberated and yet the problem persists. Someone had this isssue?

  What is the solution? It becomes frustrating and a nuasance; especially if you work on large projects. The laptop is 2 years. I had no other problems up to this point. Can someone advise please how to fix or what to look for or what next steps should be taken?

  Thank you.

  Hello

  Here is the part number of the power supply Board:

  55.M1FN1.001

  BD POWER (30 USD)

  I would also check the power cable:

  50.RSF01.001

  CABLE. POWER. BOARD OF DIRECTORS

• my laptop fell to the bottom of the acer aspire 5253

  After the slaughter, I logged in but when I turned on, he gave me notice that I have to start with disk recommending that it cannot start because it is no bootable disk. Can someone help me what I need to do?

  Seems to me that you'll need a repair or replacement of equipment.  There are several things that could cause this error, but I guess that something on the laptop is damaged: the hard drive, connection is the motherboard, something else, and how much it will cost is impossible to say.

  Good luck!

  Clive

• Acer Aspire 5253 keyboard does not!

  Hello

  I wonder if anyone has any suggestions!  Keyboard suddenly stopped working, tried a buch of things including: take batteries, FN + F6, FN + F7, does not not in safe mode, reinstalled dirvers - without exclamation points.  Tired an external works very well.  Tried the keyboard on another laptop fine owrks.  I think it's on the side of the motherboard, but I missed anything, any suggestions would be appreciated!

  Well got it works still not sure what cause worked, I took everything out, including the card mother put everything back together, and it works now!

• fact my aspire 5517 notebook series have built in microphone?

  I tried to get my microphone to work for use in my Skype calls. I do not know if the series aspire 5517 laptop has one built and if yes, how can I get it to work?

  Hi kerrysmith_611,

  There is no built-in microphone in don't aspire 5517 series.

  http://support.Acer.com/acerpanam/notebook/2009/Acer/Aspire/Aspire5517/Aspire5517sp2.shtm

• Definitions of key Acer 5253

  After having been screwed on a TIME TOO MANY and wasted a lot of time due to inadvertently clicking on a Fn key and completely disable certain features of the base system, I try to find documentation exactly what it are all the nasty little keys Fn for the Acer Aspire 5253.  You would think that I have found this with a simple websearch or a search in the Acer support site, but you would be wrong.  What I found instead is an absurdity of waste of time much more in the form of a generic manual for Acer (everything that is in the Acer area support for the 5253) whose key mappings have nothing to do with reality and a lot of craziness on the installation and Launch Manager, which requires a download and decompression and a backflip and a plie , a reboot and STILL does nothing running.  So I ask you, as a last resort to write an oath of blood to never buy another product Acer: where can I find the Fn for the Acer Aspire 5253 keys?  I don't want to change them, I don't want to do something with them, I just want to know what they are doing (allegedly), so that the next time that some incredibly vital system functions cease, I'll at least have an idea that affects Fn to use to unscrew, rather than randomly by clicking on the Fn keys and thus more hugging me even worse.

  High

  Don't know if this will help but...

  On the support page for document downloads 5253, there is also a "Quick Start Guide" available (aka Aspire Notebook Series Quick Guide).  It has a page on the uses of the hotkey, for example Fn + Fx.

  Let us know if it meets your needs.

  Sort

• Aspire 9410 laptop

  I am trying to determine if I have an Aspire 9410 series or model 9410Z.  I want to upgrade my RAM from 2g to 4g, but have not been able to do.  Have learnt the 9410Z RAM cannot be upgraded, but I can't find anything on my computer tells me that I have.  The label shows Aspire 9410-2829.  My SNID is *.  Thanks for any help

  [private under the leadership of life]

  GMD,

  We have removed the SNID of your post to keep your personal information private, but I was able to determine that your model is an AS9413Z. I can also confirm that the unit will support a maximum of 2 GB of RAM to our specifications.

  Hope this helps,

  Cory

• Aspire BIOS 1414WLMi

  Hi all

  I searched for weeks for an answer to this, but no luck.  So I hope that someone here will be able to help.

  I have an old 1414WLMi book sucks (since 2005).  He came out with BIOS version a 3, 06, and I've updated from 3 to 10.

  When I do a check of numebr series on the site Acer he tells me it's an Aspire 1410, so it fits in this category.  The older version of BIOS that I find on the site is 3108, and the most recent is 3314.

  When I try to update the BIOS 3108 or 3314 (of Windows), I get an error saying that Insydeflash is not supported and an other error message on IHISI something or other.  When I try to update BACK I get an error about an interruption of process 10: 00.

  I tried updating using the Fn + Esc, but I just get a continuous flow of 3 beeps (one long, two short).

  How can I get these updated BIOS up-to-date?  (I want to install Windows 7 and he told me that my BIOS is not ACPI compatible and I should update).  I have a feeling that he must have had a BIOS update some time back, somewhere between version 3 has 10 and 3108, which activated the function Insydeflash.  But I had no luck finding it.

  * Extra info: I contacted Acer in South Africa and they tell me that the BIOS versions listed on the site (3108-3314) are only released versions.  That cannot be, because it is very clear that my BIOS is currently 3 to 10 which is not on the list.  They were not much help.

  I've updated the 1.25 GB RAM and it works quite happy.  He got the original Windows XP with SP3 now.  I just did a system restore is back to factory.

  Look forward to your comments!

  There are two versions of the Aspire 1410 series.  Those with LCD 11.6 "is the latest system and what you seem to be looking on the page drivers.  BIOS for this system are the 31xx versions.

  LCD 15.4 version "of the system, which is the oldest circa 2005, includes a series of BIOS which is 3Axx.

  The two BIOS are not flashable-Cross and are intended for different systems.

  Please understand that, due to the age of the systems LCD 15.4 ", we do not support Windows 7 above.

  We have published only Windows XP drivers for this system.

• Acer Aspire 5742 G died. I think the BIOS is damaged because all I get is a blank screen.

  I was a heavy task on my other laptop and I wanted more RAM, so I decided out of the 4gigs of my Aspire 5742 G only to find out that this is not not a 4 × 1 GB of RAM (instead a 2x2gb DDR3). All I've done is out of RAM, I saw that it was only 2gigs and put in (nothing else, I know my way around computers quite). Then I thought to share work on the network, only to find out that my Aspire 5742 G will not start. Nothing. Not eveb the Acer logo appears. Access to the hard drive led is always off (not a single blink). Terrified. I thought it would be to display, but like I said the HARD drive light flashes once again.

  So I jumped to Google. Discovered it probably a BIOS problem. So I downloaded the BIOS Acer will, comes to be welcomed with a ZIP file of gibberish. I have no idead how to use this ZIP to update my BIOS. The exe file is not good as the PC starts no and all other methods seem unlikely given the boot selection is not yet possible.

  Can someone please guide me to the right maybe average to refresh my BIOS?

  Thanks in advance,

  PC Info and specifications:

  Acer Aspire 5742 Series
  Model No.: PEW71
  Aspire 5742 G-374G50Mnkk
  MFG Date: 1011
  Current OS: Windows 8 Pro
  Original OS: Windows 7 Home Premium
  RAM: 4 GB (2x2gb) DDR3
  CPU: Intel Core i3 - 370 M
  GPU: ATI Mobility Radeon HD 5470
  HARD DRIVE: 500 GB 2.5 "SATA

  [private under the leadership of life]

  It may be almost impossible to diagnose a problem remotely, I hazard a guess and suggest that your problem has nothing to do with your BIOS.

  Given your description of your actions, I would recommend you check and double-check your RAM seats. Also, make sure there is no damage to the socket. There is also the probability that static was able to destroy the RAM. You may need to try known good RAM to exclude this possibility.

  It is not always possible to update a BIOS if there is a hardware problem.

  Of course, I can't risk a BIOS Setup until there is absolutely no doubt that a problem does not exist elsewhere. If an update attempt fails, you might find yourself worse. In short, make sure that your RAM and the seating is 100% before looking elsewhere. Your choice of courses.

• My acer aspire 5050, pin power connection is broken, what is my options?

  The power cable to operate or recharge this phone cannot be used as the PIN inside the connector that connects the cable is broken. What are my options? This device is an Acer Aspire 5050 series, type of laptop. Thank you

  send it back to acer for the service

  but they will charge out-of-warranty fees

• Windows 7, re - install the new hard drive was a success, but I now get guests that it is not valid, and I need to buy Windows 7

  From January 2013, after a series of about 13 automatic updates, Windows 7 hang in the boot process.  Using the repair function of the system on the Windows 7 installation disc, I was able to select a restore point at the beginning and Windows would be operated until I chose shutdown and updates would be automatically install 13 updates and then freeze at startup.  Finally, in a workaround, I would choose standby extended instead of shutdown until the system would break down after 10 days.    After going through this loop until the end of February, I bought a new hard drive and installed Windows 7 again.  I used the product key and the OEM ID on the back of my Acer Aspire 5253 - BZ849, but keep getting prompts is not valid.  How can I get this fixed WITHOUT PAYING for WINDOWS AGAIN!

  The product key on the back label of the Acer PC is: * product key removed privacy * (initially, it has been accepted as valid.  Now I get guests that it is not and I have 22 days to activate.)  There is also a code in parentheses (X 16-96072), followed by 168-00196-149-361.

  Other data are product ID: 00359-OEM-8992687-00006

  The following Diagnostic Report:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - VFP73 - B9WVC-W84BD
  The Windows Product Key hash: X7U6R5xvKJwITn/mt/K9SSBRVrk =
  Windows product ID: 00359-OEM-9816812-49361
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W84BD00359-OEM-9816812-493618S-1-5-21-3043357091-958766540-506442348AcerAspire 5253AcerV1.1120110425000000.000000 + 000C6203007018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Standard 20071228D727E4AEA970Eo9pPGB5tREOLSGNBIe + lixmnuZ0 = 1 81607-903-2756143-64835

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-168-149361-02-1033-7600.0000-0712013
  Installation ID: 011270290203018496573530022091757890631021023321580540
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W84BD
  License status: initial grace period
  Time remaining: 31800 minute (s) on (22 day (s))
  Remaining Windows rearm count: 4
  Trust time: 21/03/2013-16:37:33

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 3:16:2013 15:10
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEA6GHg0Gyi3MFU + QArIHFiPUqF6j / 8 it ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SLIC ACRSYS ACRPRDCT
  SSDT AMD POWERNOW
  SSDT AMD POWERNOW

  the first time you use the COA key, you need to activate by phone

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.