Assign several getFields to a variable of monkey

Similar Questions

• Assign several handlers to a single user in Captivate premium

  Is it possible to assign several handlers to a single user in Captivate premium?

  I have a group of users, where I need 3 managers to have access to a group of users (all 3 managers are educators of customer).

  I want to know if I can add three (separated by commas) Manager ID in the CSV download, or if I can perform this action in the user interface of the first, once users have been downloaded.

  Thanks in advance.

  Hello

  We cannot assign several handlers to a user.

  If we add a comma with the Manager separate ID to will gives us the error when loading the CSV.

  Here is the screenshot for the same thing.

  

  Thank you

• How to assign a user to a variable?

  for example:
  
  username: * scott *.
  
  under this user, there is a table called employee.
  
  Select * from scott.employee; (Normal mode)
  
  I want to assign the user scott to the variable a and view the table as
  Select * from a.employee;
  
  Is it possible to assign a user to a variable?

  In SQL, a variable is allowed to be used only as a value that is passed to a clause where clause. You cannot use variables that contain the name of the object in the static SQL. You must build the SQL Dynimically.

  Here is an example.

  declare
    mySchema varchar2(100);
    lSal emp.sal%type;
    lEmpNo emp.empno%type;
  begin
    mySchema := 'SCOTT';
    lEmpNo := 100;
    execute immediate 'select sal from ' || mySchema  || '.emp where empno = :1' using lEmpNo into lSal;
  end;
  

• How to assign the value to the variable of project in the Jython script

  Hello
  
  I want to assign a value to the variable of project in the jython script.
  I tried to assign the following, but it is throwing some errors.
  
  < @.
  int noOfRecords = 10;
  #var1 = noOfRecords;
  @ >
  
  
  Can you please help me in this regard.
  
  Concerning
  Shyam

  Perfect! Good to know that!

  Please, don't forget to close the thread and assign the status to 'correct' or 'comfortable' to each response that helped you!

  Thank you

  Cezar Santos
  http://odiexeperts.com

• assign / argument of the loop variable

  So normally we can configure a loop like this argument:

  {% for section in webapp1.items %}

  But I want to put the argument (not sure if that's the right terminology) as a variable, so something like:

  {% assign arg = 'elements' %}}

  {% for item webapp1. arg %}

  ...

  
  

  or

  
  

  {% assign arg = "webapp1.items" %}}

  {% for %} arg element

  ...
  

  
  

  but it does not work (I guess because the variable is treated as a string and not a true argument).

  
  

  Is it possible to achieve the same idea?

  Or a way to "convert" to the variable in the right data... type?
  

  I'll assume you want to do this within the large_product.html model - a way to do it may be addressed as follows:

  {% for attr in this.attributes-%}

  {assign key = attr [0]-%}

  {% assign values = attr [1]-%}

  {% for value in values-%}

  {{value.id | adds: "ID:" ""}}

  {{value.name | added: "name:" ""}}

  {{value.displayType | adds: "display Type:" ""}}

  {{value.image | adds: ' Image: '}}

  {{value.price | adds: "price:" ""}}

  {% endfor}

  {% endfor}

  Essentially, you could build the container (lets say you had a drop-down list (you may not know until you get in the attribute values - but Im going to assume that you can have only one type of value - so a drop-down list, select or list. Radio on the last element of the array, you can set the type based on the Variable DisplayType... have a switch... or even just check out the first value of an attribute and the)) value before you browse through them... I would then have a switch that is developing good "support" typebefore and after that the 2nd loop - and in the 2nd loop for build the 'options' by using a point likealso add value by default "Please select an option" element...

  You could really do this to get a list of the products as well, this set of curls just needs to reside in a loop through the product - I hope it's useful.

• How to assign a calculation to a variable in the RTF file?

  Hello

  
  I play a series of if - end if statements to calculate the "Days_Late."

  <? If: DAYS_LATE < 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

  <? If: DAYS_LATE = 0? > * <? end if? >

  <? If: DAYS_LATE > = 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

  I would like to assign the code above to a variable and use this variable in the following logic <? xdoxslt:IfElse (VARIABLE > 0, round (VARIABLE),-1 * round (xdoxslt:abs (VARIABLE)))? >

  to exercise a function of round_up ("symmetric" rounded). Oracle doesn't have a function for this yet...

  
  

  How can I make this work directly in the .rtf file?

  
  

  Thank you

  ATP
  
  

  Hi all

  I didn't change the data (sql).
  Also, I tried to make it work using the xdoxslt:set_variable () and xdoxslt:get_variable () functions. However, this was not necessary and makes more complex than required.

  It is now resolved using a formula of symmetric rounding (rounded to 0):

  I replaced the VARIABLE with my calculation: (sum (DAYS_LATE) count (PAYMENT) div)

  Thanks a lot for the replies and offers to help her

• return Recordset from several tables with session variables

  First of all, let me start by appolgizing for the rawness of this question, but I'm really stuck...  I have two tables in a database, a table name, username, password and company (user logs on to a secure site using the UN and PW creating a session MM_username variable).  There are several users from different companies (IE 6 users of XYZ Corp., 20 ABC... etc.).  The second table has data that is specific to each company.  How to display the data in the second table so that it is specific to the user (ie: Robert of XYZ Corp. sees only specific data of XYZ Corp.)?

  Thank you very much

  What you would do, is to join the tables on the company name field in a query:

  SELECT * FROM tbl_name LEFT JOIN tbl1.company_name ON tbl2.company_name WHERE username = MM_username;

  If you need a more details or help database tables themselves you'll need post a few details anymore, but that's the gist of it.

  And just to add, is that if you try to add in the session.  Otherwise take your session for the company_name variable in table 1 and use it in a select query based on your session pages.

• Required emergency aid: restore the value assigned to the previous session variable

  Restore the variable value assigned to the previous session.

  I'm looking to restore the value assigned to a variable in the previous session. I learned that I don't put any value in the field of the value of the variables, captivate will automatically restore the value assigned to the variable in the previous session. Captivate stores interrupt the data value.

  Also, I could find a good example with source and the file published by Jim Leichliter. However, if it is downloaded the file published to Moodle, it works fine. But if it is open the file source Captivate 5 publish without making any changes and transfer to Moodle. It does not work.

  Any thoughts or ideas are appreciated.

  This should work for both.

• How to assign several groups of home page tabs?

  I was hoping to make use of the tab function, but when I restart FF my groups all disappear except my home page tabs. Is there maybe an add-on that can save and rebuild groups of tabs?

  And is it just me or should FF have warned me that the creation of a group of tabs set my home page and remove my links?

  Also, I wouldn't need to tab groups if the new tab screen can be configured to contain more links with small vignettes - perhaps also a possibility to Add on?

  Thank you...

  Finally got a chance to try it - looks great so far. Configurable Super - lose the search bar, reduce the size of the tile while maximizing the police to name, create custom groups...

  There will be no problem to get everything I need on a single screen with scrolling - just wish I could reorganize and group in a single screen.

  I see no reason to set as my homepage though - there are several tabs, I always open so 'new tab' mode, that's exactly what I was looking for.

  Thanks for the help,
  CC

• several versions of the Variables shared on the same network

  I have 2 separate reactors working on the same network each variable deployment shared ~ 50 (different names on each process) contacting LV 8.5RT running on hardware of the FP.  One of the reactors is asked for new features and upgrade.  It is possible the Heve 2 different shared variable engine (8.5 and 2010) and the versions on the same network, and the client computer, or I'm in trouble.

  Oh boy I think you ask in trouble here!

• Assign a value to a variable

  Kind of a matter of newbie here.  In TestStand, I use an action (ReadTemp see table) to call a .vi who reads a temperature of a sensor.  One of the parameters in action (the return of the vi) is the value of the temperature as a DBL.  I would attribute this numerical value to a variable FileGlobal to decide at what stage of test that is run then.  It doesn't seem like this should be difficult, but I don't know how to do it.  Any help would be appreciated.

  I can't read your attachment for the moment, but I noticed that you use TestStand 4.1

  Then you should be able to set the output of your VI connection your FileGlobal, but please make sure that you have connected to this output in your VI to the part of the connector of the VI. Back to TestStand SeqEditor, if you do not see this connection try to make a prototype of reloading.

• Selection of several columns in the variable of a string

  Hi all

  Is there a trick how to select the values of all columns in a single variable of type varchar?

  Consider that une_table has 5 columns of data type VARCHAR or NUMBER.

  DECLARE

  vvc_String VARCHAR2 (1000);

  BEGIN

  SELECT * INTO vvc_String une_table;

  END;

  /

  Thanks for the tips.

  Use dynamic SQL statements:

  SQL > CREATE TABLE UNE_TABLE
  2 AS
  3. SELECT *.
  4 OF DEPT
  5 WHERE ROWNUM = 1
  6.

  Table created.

  SQL > DECLARE
  2 vvc_String VARCHAR2 (1000);
  3 v_stmt varchar2 (10000);
  4 BEGIN
  v_stmt 5: = Q'[select "]';
  6 for v_i to (select column_name from user_tab_columns where table_name = 'Une_table"of order of column_id) loop
  7 v_stmt: = v_stmt | ' || ' || V_I.column_name;
  8 end of loop;
  9 v_stmt: = v_stmt | "to une_table";
  10 run immediately v_stmt
  11 in vvc_String;
  12 dbms_output.put_line (vvc_String);
  13 END;
  14.
  10ACCOUNTINGNEW YORK

  PL/SQL procedure successfully completed.

  SQL >

  SY.

• How to assign the value of a variable to a quiz?

  Hi, I have a problem, I attempted to set the value of a variable for the quiz on the final value of the project, any suggestions?

  Sorry but I do not understand your question at all. If you talk about a quiz like cpQuizInfoPointsscored or cpInfoPercentage system variable, this is all simply impossible because the system variables are read-only.

• SQL query to assign several concurrent programs to the concurrent Manager.

  Hello

  You have any script to assign a list of program contributing to separate concurrent managers. Currently, there are more than 100 programs need to be assigned to the manager.ut

  We do front end, but it will take quite a long time to complete this task.

  Could you please help me on this.

  Thank you and best regards,

  Simone.

  Hi Simone,.

  First of all I need a sql query to find out what custom programs are assigned to which Manager.

  Please see:

  How can I tell which concurrent Manager handled a simultaneous [ID 344011.1] application/program

  Find all programs assigned to the specialization Manager rules? [271283.1 ID]

  Second, I have to give these programs customized to different custom managers.

  See if this helps:

  https://forums.Oracle.com/thread/2343489

  Thank you &

  Best regards

• How to assign several TOC to correct the text?

  I work in InDesign CC2014 on a Windows 7 PC. I have a document with TOC - one three styles to the content of the chapter, one for a list of figures (LOF) and one for a list of tables (LOT). In each, I have assigned different paragraph styles to use - chapter heading styles, figure caption for the LOF and legend of table for the BATCH. The text for each is an area of unique text not moved on.

  Using the option to update Table of contents in the menu layout, the table of contents chapter works. The LOF is using the BATCH. And the LOT is grayed out and will not be updated the content at all. Each of them occurs with the cursor in the correct discreet text box.

  I can get everyone to work if I use the Table of contents, choose one I want, flow the text into a new text box and replace the existing text by the new box. Next time, I must do the same, because the Update Table of contents will not work in the new text boxes.

  I hope I'm missing just something simple. Any help would be really appreciated.

  Thank you.

  Peter,

  I placed a figure and a table in the document, recreated it in the model from scratch, and everything seems to work. I realized the original had the text placeholder, in the correct style, but if it has not been generated, this could be the reason why it did not work.

  I saved the model as a indt file and will use later today or early this week next to the 17 other documents. This will be the text - if they work in the documents created from the template.

  I will mark this answer as being correct, and if I have questions after I tried to use it, I'll post them in this thread as well.

  Thank you!!