Assign to grouosps the public

Similar Questions

• VPN client with counterpart on secondary ip address on the public interface of the router

  Hello

  On our office LAN, we have a Linux server than it hosting a VPN connection to a remote client.

  Do this to ISAKMP card on our Cisco router port connections to the internal ip address of the Linux host.

  However, we now want to allow our users to establish VPN connections to our local network using the unit of Cisco VPN Client.

  Of course, this would present challenges, as the ISAKMP our router port is mapped through an internal host.

  So, we tried to set up a secondary ip address on the router and VPN clients to connect to that.

  What we see in our newspapers is as follows:

  Phase 1 is very well established, and the VPN Client prompts the user for a user name and password.

  Authentication of the phase 2 starts, but the router says it's is not to receive a proposal of hash of the client.

  185 12:18:06.943 09/03/11 Sev = Info/4 IKE / 0 x 63000014
  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  (in this case, where x.x.x.x is the secondary ip address on the public interface)

  After that, the Phase 1 SA is removed and the connection fails.

  My understanding is that the Phase 2 negotiation takes place with the ip address assigned to the client in Phase 1, which suggests that the problem occurs because the client communicates with the main on the interface ip address, and no secondary ip address.

  When remove us the mapping of port isakmp and the VPN client to connect to the primary ip address, everything works fine.

  Question:

  It is possible to establish 2 router VPN Client uses a secondary ip address?

  If not, is there some way I can implement the port mapping so that it occurs, the connection comes from a specific ip address?

  Garreth

  Should be supported on IOS.

  The command is crypto ctcp port...

  Check this link:

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd8061e2b3.html

  Federico.

• How to export the public key / certificate of OUD?

  Hi all

  Maybe it's to export the public key of a unified directory of Oracle?

  I.e. I have Setup SSL on port 636.

  I had created a new certificate self-signed and added to the LDAP server following the guide of SSL to get up and running fast - Oracle Fusion Middleware Oracle Administration Guide unified directory.

  But the certificate for the LDAP server sends when the connection to this is some other certificate and not my certificate.

  CN = computer name, O = Oracle unified the self-signed certificate directory

  Instead of

  CN = Company.com, o = company, c is AU

  that I had created. Because when I created this certificate I exported public key in a text file as per step 4.

  Any guidance would be great.

  Hello

  You want to assign a new SSL certificate to the OUD instance or you just want to export the existing one so that you can import it into a truststore customer?

  To export the cert public key OUD, follow these steps:

  JAVA_HOME/bin/keytool - export - keystore /OUD/config/keystore-alias server-cert-file mycert.cer

  You will be asked the password store which is located in OUD_INSTANCE_DIR>/OUD/config/keystore.pin

  -Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• Does not illuminate VAPP deployed to the public catalog

  Hi guys,.

  I created a Public catalogue and exported a file to ovf Nexus 1000v in this catalogue. Since it's Public catalogue it has the rights to publish this catalogue to all organizations.

  I have an organization named "developers". This organization is able to refer to the public catalog and deploy a new TIME of it. I see on vCenter new VAPP appearing under the pool of developer resources. But this TIME lighting fails with the error message below

  "The operation could not be performed because the argument is not valid. A specified parameter was not correct.

  spec.memoryAllocation.reservation

  vCenter Server task (moref: task-1201) failed in vCenter Server 'Cloud_VC' (7b35a50a-dea1-48a2-9ae4-b38c74f8ffbb).

  -A specified parameter was not correct.

  spec.memoryAllocation.reservation ".

  I assigned 5 GB of RAM to my org vDC and I use 'Booking Pool' allocation model. I also tried giving them 1 GB, 2 GB and 3 GB of RAM to this Nexus1k TIME at the time of the deployment of the catalog, but every time I get the same error.

  Any help in this will be highly appreciated.

  Problem is with your catalog here.

  Nexus is suppose to work with vcloud Director in parallel integration. do not deploy inside like a paralytic. And NExus have its own requirement that interact with the dvswitch. I will propose you can deploy some other TIME like windows/linux and see if it works.

• Problem of change in status .folio of 'Private' to the 'Public '.

  Hi all

  I am ready to publish a .folio for my client.

  It is the new edition of a Magazine within a folio Multi application.

  I created the problem with my Adobe ID account " " [email protected] ', so I am the owner of the .folio. .

  I shared the .folio with the client, owner of the Pro DPS license and now I'm ready to .folio the value of 'Public', but the 'Public' choice is not in the window as you can see in the screenshot here below...

  I put only "private".

  I already tried to "do not publish" and repeat, but nothing changes.

  Any idea to change the situation?

  Thanks in advance for your kind reply.

  Best regards

  Michela

  

  An easy way to fix this is to share the folio from one account to the other and then use the copy feature Folio in Folio Producer. If you do this on the same computer, it is as if you created the folio from scratch in the new account, and all your items and metadata are intact. It takes about two minutes.

  The 'step by step guide' is only for simple editing. See Pro Quick Start Guide and the Companion Guide Edition for multi-folio applications. The Adobe ID allows you to create and publish folios is important. It determines what pages you publish appear in which app. So, you'll want to create a different Adobe ID for each application that you create. Assign you these Adobe as a 'Request' ID using the Admin account. Which is explained in the two guides.

• How to assign values to the nested table and passes as a parameter for the procedure?

  How to assign values to the nested table and passes as a parameter for the procedure?
  
  Here are the object and its type
  
  create or replace type test_object1 as an object
  (
  val1 varchar2 (50).
  val2 varchar2 (50).
  VARCHAR2 (50) val3
  );
  
  
  create or replace type test_type1 is table of the test_object1;
  
  
  create or replace type test_object2 as an object
  (
  val1 varchar2 (50).
  val2 varchar2 (50).
  VARCHAR2 (50) val3
  );
  
  
  create or replace type test_type2 is table of the test_object2;
  
  
  GRANT ALL ON test_object1 to PUBLIC;
  
  
  GRANT ALL ON test_type1 to PUBLIC;
  
  
  GRANT ALL ON test_object2 to PUBLIC;
  
  
  GRANT ALL ON test_type2 to PUBLIC;
  
  Here is the table object type:
  
  create the table test_object_tpe
  (
  sl_num NUMBER,
  Description VARCHAR2 (100),
  main_val1 test_type1,
  main_val2 test_type2
  )
  
  
  NESTED TABLE main_val1 STORE AS tot1
  NESTED TABLE main_val2 STORE AS earlier2;
  
  
  -----------------------------------------------------------------------------------------------------------
  
  Here is the procedure that inserts values into the nested table:
  
  PROCEDURE INSERT_TEST_DATA (sl_num in NUMBER,
  Description in VARCHAR2,
  p_main_val1 IN test_type1,
  p_main_val2 IN test_type2
  )
  IS
  BEGIN
  
  FOR rec in p_main_val1.first... p_main_val1. Last
  LOOP
  
  INSERT INTO xxdl.test_object_tpe
  (
  sl_num,
  Description,
  main_val1,
  main_val2
  )
  VALUES
  (
  sl_num
  description
  test_type1 (test_object1)
  p_main_val1 .val1 (CRE),
  p_main_val1 .val2 (CRE),
  p_main_val1 .val3 (rec)
  )
  )
  test_type2 (test_object2 (p_main_val2 .val1 (CRE),
  p_main_val2 .val2 (CRE),
  p_main_val2 .val3 (rec)
  )
  )
  
  );
  
  END LOOP;
  
  commit;
  
  END INSERT_TEST_DATA;
  
  -------------------------------------------------------------------------------------------
  
  Here are the block anonymoys what values attributed to the object type and pass values in the procedure:
  
  Set serveroutput on;
  
  declare
  
  p_sl_num NUMBER: = 1001;
  p_description VARCHAR2 (50): = 'Test Val1;
  
  inval1 test_type1: = test_type1();
  inval2 test_type2: = test_type2();
  
  Start
  
  
  inval1 (1) .val1: = "testx1";
  inval1 (1) .val2: = "testx2";
  inval1 (1) .val3: = "testx3";
  
  inval2 (1) .val1: = "testy1";
  inval2 (1) .val2: = "testy2";
  inval2 (1) .val3: = "testy3";
  
  CSI_PKG. INSERT_TEST_DATA (sl_num = > p_sl_num,)
  Description = > p_description,
  p_main_val1 = > inval1,
  p_main_val2 = > inval2
  );
  
  end;
  /
  Someone can correct me.
  
  Thank you
  Lavan

  Thanks for posting the DOF and the sample code but whenever you post provide your Oracle version 4-digit (result of SELECT * FROM V$ VERSION).
  >
  How to assign values to the nested table and passes as a parameter for the procedure?
  >
  Well you do almost everything bad that could be hurt.

  Here is the code that works to insert data into your table (the procedure is not even necessary).

  declare
  p_sl_num NUMBER := 1001;
  p_description VARCHAR2(50) := 'Testing Val1';
  inval1 test_type1 := test_type1();
  inval2 test_type2 := test_type2();
  begin
  inval1.extend();
  inval1(1) := test_object1('testx1', 'testx2', 'testx3');
  inval2.extend();
  inval2(1) := test_object2('testy1', 'testy2', 'testy3');
  
  INSERT INTO test_object_tpe
  (
  sl_num,
  description,
  main_val1,
  main_val2
  )
  VALUES
  (p_sl_num, p_description, inval1, inval2);
  commit;
  end;
  /
  

  See example 5-15 making reference to an element of nested Table Chapter 5 using PL/SQL collections and records in the PL/SQL doc
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/Collections.htm#CJABEBEA

  1. you don't even have the procedure because it is a simple INSERTION in the table you can do directly (see my above code)

  inval1(1).val1 := 'testx1';
  

  Since you have not yet created all the elements, there is no element 1 "inval1". You need EXTEND the collection to add an element

  inval1.extend();
  

  And then, there is an empty element, but "inval1" is a container for objects of type 'test_object1' not for scalars as "val1", "val2", and "val3".
  If you can not do

  inval1(1).val1 := 'testx1';
  

  You must create an instance of 'test_object1 '.

  inval1(1) := test_object1('testx1', 'testx2', 'testx3');
  

  And so on for the other collection

  You don't need the procedure (as my code example shows), but once you fill in the variables correctly it will work.

• Continues to receive updates beta of MAC OS x in the App Store even if I reconnect my mac from the public beta program

  Hello

  I'm still getting updates beta of MAC OS x in the App Store even if I reconnect my mac from the public beta program. The option to receive these updates beta is no longer available in my preferences system, as shown here:

  https://www.igeeksblog.com/stop-OS-x-beta-software-update-notifications-in-Mac-a pp-store.

  Any suggestions?

  Thank you

  Restart your Mac, then see if these updates appear again.

• I leave the public beta without restoring?

  I had no problem with version beta, so I do not need to downgrade my phone. I wonder if I can just unregister then wait for the next general release with a higher than the build that I'm on. Say so let the public beta, once the official iOS 10.0 is released, will be my offer to phone me the regular version of 10.0.1 when coming out a few weeks later? Or I'll be in a limbo land where is no update available again?

  You can wait for the official release.

  See the following information to https://beta.apple.com/sp/betaprogram/faq

  Always save your iOS device before installing the beta software. To obtain a release of the expedition of the iOS on your iPhone, iPad or iPod touch, you can simply install the final version of the software you're testing when it appears in the software update. If you want to return to a previously published version, you must first delete the beta software, and then re - install the latest version of iOS and finally restore from your backup iTunes saved previously.

• How do you spend the Public Beta Tester for Apple Developer?

  I've recently become an Apple Developer! I used to be a Public beta tester. How to place my iPhone to the Public 10 iOS to iOS Developer 10 from my account?

  Congratulations on how to become a developer! To switch programs, follow the instructions on the beta page to unregister your device (make sure that you delete the profile as well), go to the Developer Portal, register your device and install the profile. You should be good to go!

• ITunes has stolen my music from my computer. Because they do not want to deal with the public, what should I do to get back them.

  Every so often, iTunes sends a notice to update the iTunes on my computer. Last year after that they did, all sounds have disappeared from my list of reading hundreds of old songs. Now, when I click on any song or melody, nothing happens.

  Given that Apple does not want to deal with the public, I ask, what do I do now, please?

  See the empty/corrupted after upgrade/crash iTunes library. Ideally, the measures taken immediately after that the problem appeared would restore your library. In some cases your media may be still on the computer, but not when iTunes is looking to it. The songs that do not play show with an exclamation point in the view of songs? ITunes plays all audio signal at all?

  TT2

• My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  Omegamax,

  Have you tried spotlight?

  

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• How to find the URL of the public website of Photostream?

  Within iOS a shared link to find the "Internet site" for a photo gallery album.  How this is achieved in Photos?

  Hi mkrech,

  When you want to send an invitation to an album shared using Photos on your Mac, you can either send the invitation by e-mail or iMessage, or you can do the Web site of the public album, which is what it looks like you want to do.

  To do this in the album you want to share, click the 'People' button on the Pictures toolbar. Select the Site Web Public checkbox. After a while, the URL of the Web site is displayed.

  See this article for reference - iCloud Photo Sharing FAQ - Apple Support

  Thank you for using communities of Apple Support.

  Best for you.

• How can I remove me from the public beta program

  From Googling, it seems that I have go to System Preferences and click on App Store, where I should see an option «your computer is configured to receive seeds of pre-release software update» However, I do not see this option

  Hi Tony,.

  Looks like you want to get out of the public beta program for your Mac. Is this fair?

  This page of the FAQ has instructions for leaving the program - Apple beta software program

  Specifically -.

  How can I leave the Apple Beta software program?

  To exit the program, visit the Unenroll page and follow the instructions to remove the Apple Beta software program of your Apple ID.

  You can also reinstall a version of Mac OS X on your computer-

  How to make a version of Mac OS X on my Mac?

  Always back up your computer before you install the beta software. To obtain release of the shipment of Mac OS X on your Mac, you can simply install the final version of the software you're testing when it appears in the Mac App Store. If you want to return to a previously published version, you must first delete the beta software, then re-install the latest version of Mac OS X and finally restore from your backup Time Machine.
  Learn more about how to erase and install OS X 
  Learn more about how to restore from a Time Machine backup

  Thank you for using communities of Apple Support.

  Best for you.

• Convert VI from the private to the public

  Try to make a public private VI. I clicked open the class explore and moved the file from the private to the public. Then I moved it physically dir private to the public. Access to a class now, said public, saved from the class. When I try to put in a block diagram, it is always private. What should I do?

  Thank you

  JVH