Satellite L650 - unable to connect to the public network (has no valid IP address)

Similar Questions

• Satellite Pro L650 - unable to connect to the wireless network

  Dear Sir.

  I just bought a SatPro L650 (Intel i5) with welcome window 7 2 weeks and struggled to connect to internet. Each time it gives me the 'Network security Key Mismatch' message. I used the WPA/WEP key found under my Thompson router. Despite the advice to use Cap Lock still does not work. When I connect the router using the (yellow) Ethernet cable for the new laptop, I have no problem with the evaluation of the internet.

  I desperately need help and hope somebody can advice me how to overcome this problem in secular terms step by step (sorry I'm not a savy TI). Or is there a setting that I need to do on both the new laptop, as well as on my desktop (connected to the router).

  Appreciate your advice.

  See you soon,.
  John

  Hey Buddy,

  > "Incompatibility of network security key.
  This would mean the WLAN network isn t correct key.

  If the key on the bottom side of your router doesn t work it seems that you have changed the WLAN key in the past
  In the configuration of the router, you can change the WLAN key and set a new one.

  Check this box!

  By the way: If you can access the Internet through an Ethernet cable, configuration of the router to ISP (Internet Service Provider) is correct and that the problem must be the WLAN configuration.

• Satellite L650 - unable to connect to the internet after the clean install of Windows 7

  Hi guys

  IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

  I even tried ethernet and no luck.
  The screen display resolution is also mucked up.
  What can I do?

  Also reset it to factory settings make me reinstall it home premium?
  If so I'll do that but I need to know if this is the case, please

  its a PSK1JE L650 btw

  Post edited by: bilal98

  > I tried Ethernet and no luck.
  > The screen resolution is also mucked up.
  > What can I do?

  You must install the necessary drivers.
  For internet connection, you will need to install the LAN and WLan driver.
  To get the best display resolution install display driver

  > Also reseting it to the factory settings let me reinstall it home premium?
  > If so I'll do that but I need to know if it does, thank you

  Looks like you have already done this as posted here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• ESXi 5.5 - unable to connect to the management network

  I've been using ESXi for v3.  I have a small cluster of HP DL360 G5 where I was using ESXi 5.1 update 1.  I brought a new DL 360 G5 into the mix and decided to install 5.5.  After the installation, I'm going to set up the management network as usual and even after a reboot, I'm unable to access the site via http or the vSphere client.  For help, I installed the version of HP with CIM providers and I installed the stock VMware 5.5 with current pilot Rollup and they all exhibit the same behavior.  It starts fine, but I can't connect to the management network.  Curiously, however, they address IP does not respond to a ping.  I installed the 5.1 update 1 on the same server and it works fine.  Does anyone have an idea on what's going on?  Are there recommended troubleshooting steps?  It's strange to me because the ESXi has always been very reliable on HPs.

  Thank you - Greg

  Hi Greg,.

  Welcome to the community of VMware,

  To begin with, the latest version of ESXi, VMware supports the Proliant DL360 G5 has ESXi 5.0 U3.

• Windows 8 user unable to connect to the public AT & T Wifi networks (McDonald's, Starbucks, FedEx desktop, etc.).

  I searched here and I have not found anyone else with this issue, but I can't be the only one.

  In the event that I am the first, my problem is that I can't connect to the public AT & T WiFi networks; McDonald, being the most common location.  It appears in the list of wireless networks, but it takes forever for the McDonald's to open web page in the box that says something like "Connect to the Internet" or words to that effect.  Finally after clicking this check box, a message appears at the bottom of the page indicating that the webpage is not responding; Click to refresh it.  No matter how many times I try it, nothing happens.

  I have Windows 8 on a Toshiba Satellite.  It's a new laptop comes with Windows 8; No updates to otherwise than to buy this new laptop.

  What is strange, is that I am on a WiFi network at the moment.  "Wandering WiFi" to be precise.  But I tried to get on AT & T at Starbucks earlier this evening and had the same success that I had at McDonald's.

  I'm pretty sure that I don't mess with settings wireless on my pc but I can't say that for sure 100%.

  Sorry to see that you are having problems. Please, try the following.

  Restart the device

  Make sure that all the updates have been applied.

  • Open the network connections Panel
  • Select the network connection corresponding to either right click (mouse) or hold by selecting (finger).
  • A Context Menu will appear. Please Select forgotten network.
  • After the network connection is dropped, please reconnect.

  If that solves the problem then great! If this is not the case, let know us and we will try something else.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Satellite A300D - unable to connect to the router

  I can't connect to my wireless modem that works correctly for other laptops at home.

  I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

  I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

  Help, please!

  Hello

  Why you try to reinstall the modem driver if you have a problem with your wireless network card?

  Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

  So in your case, I would try to update the firmware on your router.
  If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

• Satellite A300 - does not connect to the secure network to WPA

  Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

  I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

  Would be grateful for your help.

  Thank you.

  On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
  Then I would try the new driver.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• New Designjet T520e unable to connect to the wired network

  I have a problem with a brand new Designjet T520e that can not connect to my network cable.  Said! No connection

  I can see the lights suitable for connectivity to the plug on the printer and on the switch.  Have you tried replacing it with cables and ports from the switch, the speed setting of port on both printers and spend 100 full instead of auto.   It connects to the wireless network, less desirable in this situation.

  All revelation?

  The cable was not the solution, but thanks fo RL suggestion.   support technique level 2 indicated that there is a problem with some of the T520 newest which will be fixed in an update of the firmware soon arrived.   In the meantime, they recommend a hard reset.

• C309g-m - unable to connect to the wireless network, touchpad hangs

  Hello.

  As PrintDoc has suggested, it's a new thread in the suite here, where I jumped in with a diversion to the station 23.  I'm sorry.

  Here are the details:

  (1) system:

  Router is Thomson TG585n provided by ISP O2/Telefonica.  Download high speed ADSL to ~ 9Mbps.

  3 devices connected and stable:

  -L' computer running XPSP3, connects to the router via homeplug (Ethernet on electrical wiring).

  -Laptop running Vista Home Premium, connects wirelessly with WPA2-AES.

  -Mobile phone runs Symbian 60, connect wirelessly in the same way.

  Router is configured to operate on channel 11 g wireless and accept new devices automatically with the appropriate security password.

  It is a House of 3 floors - router on the top floor has always worked. computer bureau on a middle floor with printer; laptop and the phone can be anywhere.

  So far so good.

  Now, I want to add the wireless printer and I'm really bad.

  (2) summary of symptoms:

  I bought the C309g-m on Amazon UK in January 2010.  USB connection with assistant easily.  Migrated to wireless via the front panel.  Easy. Then tried to add a 500 GB Freecom Network Drive (NAS device connected to the router) and has failed, because I didn't RTFM.  After removing the FND, I get an error message of HP to the effect that I have "tried to set the printer's IP address" and lost the connection to the printer wireless.  Have not seen this message since then, so I can't reproduce.

  As I said, I removed the FND, who never appeared on the network in any way.  However I still can't connect to the printer wirelessly.  The wireless connection wizard crashes after asking to specify a password.  The wireless network Test report that the radio works, but shows FAIL the entrance of 'No filter '.  I looked into the console of the router and there is nowhere to set the MAC address filtering, so I'm stumped.

  I tried to 'Add a device' CD, for network via USB settings.  It takes forever (30 minutes?) to come up with the same error "MAC address filtering.

  One last thing: if I leave radio turned on (the default lighting) will lock the touchpad after a few minutes to the home screen.  If I disable it, it's fine.  Once locked, the only way to stop is to unplug the power supply.

  Finally - all the base printer functions very well.  I can print and scan through the USB port and can take copies.

  Thoughts:

  (a) I think my router settings can be screwed.  I don't see a way to set limits to the DHCP pool, I should be able to.  However, since I was 3 devices that connect to the Internet I am reluctant to do a factory reset in case I lose those!

  (b) there's something wrong with the printer - but I don't know what.

  c) I could try temporarily move the printer to the i) door ii) within reach of hardwirable of CAT5 and wireless range

  (d) the fact that I can connect the printer (wireless) or DNF (cable) makes me suspect the router.  However, I have not received any support from O2: they said it was an internal problem of LAN/WLAN and nothing to do with broadband, therefore, were not willing to help.

  I spent hours on this and get nowhere.  Help, please!

  Tim.

  BTW - I'm in the United Kingdom.

  Well, I think that there are many more problems with 'atypical' routers and HP software as there are with HP printers.  I see not nearly as many problems with certified brand routers WiFi (like Linksys, Netgear and D-Link), as I do with large brands and Belkin.

  The worst offenders are rented modems/routers that your ISP provides.  For some reason, they have a lot of industrial property settings and firmware that simply don't play well with HP printers (may be others, but I would never buy another printer HP - I know way to much about printers after their design for 25 years).

  A reliable and good solution cheap is to go buy a $40 or $50 Linksys router and replace stuff not expensive you have (or paste according to your router/modem rented).   Time and time again, I've seen problems disappear just after installing a standard router.

  You can reserve an IP address for a wired connection, but because parts wired and wireless to the printer have separate MAC addresses, this IP address is not available for the wired connection.

  Read the thread if you wish.  Discover the solutions on this website if you want to, but I still think you have a defective printer.

• Satellite L670 - unable to connect to the Bluetooth

  Hello

  I am trying to connect to the bluetooth on my Satellite L670. The driver is downloaded but it not to finalize the installation. He's always asking to connect to the laptop computer, a bluetooth device.
  This laptop have bluetooth? If this isn't the case, I can use a USB bluetooth (all?) to connect a bluetooth device.

  Thank you for your support

  Hello

  > This laptop have bluetooth?
  What model of L670 you have exactly?

  You can check the specifications of the laptop on the official page of Toshiba.