Assist in the planning of work

Similar Questions

• Assist in the planning of the work

  Hello
  I have an AQ queue processing that data in queue in a queue. Records enter into this queue via a trigger on a table. I have also written a procedure to remove files in bulk using the dbms_aq.dequeue_array.
  My question is about the scheduling of the dequeue process.
  After a dequeue process began execution. I need to check the number of records in the table of the queue. This is to say more than 100 then I would need to start start the same waiting processes running simultaneously with the first dequeue.
  
  The idea is that the number of records in the queue increases, there should be multiple removes records queue.
  
  Is it possible somehow realized using the DBMS_JOB? or y at - it another way to deal with the cases pending simultaneously if the records in the queue reaches a threshold?
  
  Thanks in advance
  Roy

  Yes. A process monitors the queue and sends a job if the queuesize exceeds a set limit. The present work is a "run once" it closes after this treatment.
  These jobs can coexist with your regular job 'every 2 minutes.

  However, the follow-up process must poll the queue periodically. If the vote is very fast, this process can be a task that runs every minute. OR a process running at all times (for example something that starts at the start of the database instance) who uses his own 'sleep' (timer lock PLSQL dbms_lock.sleep) ' only seconds between each query query on the queue.

  Sven. also, had suggested the same thing.

  See the discussion in work queue stops processing when submitted more then 2 * 16 jobs (65536) where a similar idea is used (except that he will eventually submit too many jobs!-please ensure that you have "foam" or well set the granularity of a job).

  Hemant K Collette

  Published by: Hemant K grapple on April 28, 2011 15:47

• The plans of work and the canvas color questions

  Downloaded the 2015 version of Photoshop and the problems with the color of the cloth and work plans. Work plans are displayed on a white background. I tried to change the color of the canvas by a right click and also through preferences > Interfaces but nothing has changed. Can someone advise?

  The preferred mode for work plans is:

  (1) preferences > performance > use the graphics processor = WE

  (2) the preferences > performance > avancΘs > draw = Advanced Mode

  (3) the RGB documents

  Other adjustments can result in a degraded experience. Work plans still work, but they can rate a part of the 'Visual' sugar

• How to navigate through the plans of work on my device?

  I would spend my plans to work on my device. How?

  You can drag to navigate and get an overview of the different work plans. Allows preview CC that slide you through work plans based on the width. For example, if you have a PSD that has plans to work for iOS of various sizes, and you connect an iPhone 5, overview CC will automatically display the work plan first iPhone 5. You can also select a specific work plan in the Nav app menu and navigate through work plans that correspond to the width of the selected one.

• Save the plan of work in PNG

  Is it possible to save the work plan all in PNG? Currently HAVE automatically creates a box around the objects that are on the artboard, I want to export the work plan together with all the empty space around it.

  If you want to export, and then add an object not filled, outline of the size of the artboard. If you want to use save for Web, turn the Clip to the artboard.

• Elements of the plan of work moving on an angle...

  Do not know why this is happening... I select the text tool and click on the artboard to type... the cursor is at a 45 degree angle... I select an element and a shot to the left or right... the item moves on an angle... not left or right. I inadvertently did not alter a setting to make it happen and how can I fix this normal?

  Thank you very much!

  Open the preferences (Cmd [Ctrl] k) and check the Angle of the constraint in the General window (first). Sounds like he got a value outside of 0.

• How to disable the function of work plan in Photoshop

  Hello world! My name is Arthur,

  and I'm not trying to disable the functionality of the artboard. I can't find a way to do it. Could you help me to stop the plans of work?

  Thank you

  Yep select all your layers in the layers panel and place them above the artboard, and then select the work plan and click on delete.

• Capturing the cost of the plan work financially

  Hi all
  Is it possible to capture the cost of the plan of work published in the financial plan in mapped structures shared / not shared?
  There is a baseline cost, calculated for each resource assigned to the WBS. And this baseline cost for WBS can be captured in my budget financial plan automatically using standard budgeting (program online or simultaneous)?
  
  Thank you
  Rodrigues

  Hi Rani,

  When you create your budget just use your work plan and the source in the generation Options and then choose the version of your published work plan.

  Let me know if it does not respond to your question.

  Dean

• Photoshop Artboards: avoid that content automatically jump within a plan of work

  Hello, I just create a graph composed of several work plans which should then be exported as separate images. I want to have elements of the image being set apart above the work plans so one side would occur on a work plan and on the other side on the next and so on.

  In general, PS we're going to do that to me. You can simply put eomthing above or below a work plan and that he would do anything I want. BUT as soon as you move it just 1px, PS he rise immediately in the next plan of the underlying work, which seems to be an option for some projects, but in most cases, it seems more as an inconvenience than a characteristic.

  Is it possible to disable this feature?

  Thanks in advance for any help,

  Cheers, Val

  Hi Val,

  The behavior you describe is the re-nesting.

  (1) (now) re-nesting can be disabled for an entire document by accessing the work plan tool and choose the gear on the Panel of the tool icon. It is saved with the document and is not a global property. In general we do not recommend he go off; This feature has been added to allow the old scripts to run more reliable with documents of the artboard.

  (2) (now) if the layer (or layer group) is reported as being 'Broad' compared to the larger artboard, it will be re - nest not automatically. It can still be moved in and out of the plans of work manually using the Layers Palette. 'Big' are defined as being more than 3 x the width or the height of the work plan.

  (3) (coming soon) we are looking for locking layer property also prevent to re-nesting.

  With option 2, you can group your layer placed with something that makes this group become 'Big' to the extent of the re-nesting is concerned.

  I hope this helps and gives some tools to do what you want now, at least until option 3 figure.

• How can I cancel a subscription and get a refund? An application does not work, the "assistance of the developer page" link provided by itunes is broken.

  How can I cancel a subscription and get a refund?

  An application does not work, the "assistance of the developer page" link provided by itunes is broken, and email provided by the application developer's sole means of support, but no response in 3 weeks to multiple addresses.

  The page you posted has since how to stop an auto-renewal subscription to renew again (see, change, or cancel your subscription - Apple Support).

  To contact iTunes support try http://reportaproblem.apple.co or https://www.apple.com/emea/support/itunes/contact.html

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Unable to use HP support assistant get the hpsf error has stopped working

  Original title: hpsf.exe has stopped working

  When I try to open hp support assistant I get a box that says hpsf has stopped working. says he has encountered a serious problem, click ok to automaticlly app to restart, but it dosent fix the problem

  Hello

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  When you try to open HP support assistant, you get a message that hpsf.exe has stopped working.

   

  This is perhaps due to a problem with the application.

   

  I suggest to reinstall the application and check to see if the problem persists.

   

  Step 1: Uninstall the application

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Install the program

   

  You can install the program on the site:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html?JumpID=ex_r602_go_hpsupportassistant

   

  I suggest you to get more assistance to the HP support forum sites mentioned below:

   

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/HP-support-assistant/TD-p/1301657

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html?JumpID=ex_r602_go_hpsupportassistant

   

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• Problems with the edition of work plans

  I did not have a good experience. I can't even change my plans of work, they get stuck off the coast to the right or left and I can't scroll right or left to get them to a place where I can zoom in on the map of the art of making changes. The screen of UI zooms only the Board of the art that is visible on the screen at the same time. Also when adding graphics to images or work plans I can't select them at all.

  You should be able to use two fingers on the touchpad to the panorama of the view in XD, similar to how you would scroll/pan in other applications on your Mac.  Please let us know if this doesn't work for you.

• Display the run including the seconds time in the planning work console

  Hello

  Of the work of one of my planning application console, I am able to see HBR including Box plots seconds run time (and not just MM/DD/YYYY HH: mm)

  It is very useful to check accurately the time my HBR!

  However, I am not capable of displaying the seconds on the console of my another planning application. Do you know where to change this option? (I tried to play with the preferences of the user date, but without success)

  Thank you!

  If you go to Administration > Application > settings > current application default > Display Options > Format of Date or it can be changed to File > preferences to override.

  Change the format of date to automatically detect and then he should change in the console work to include seconds,

  Example of

  

  Date in the preferences format has been set to detect automatically, updated and recorded

  

  Return to the console to work

  

  Seconds included.

  See you soon

  John

• I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

  I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

  I worked on it. For some reason, he opened my PDF in Adobe Reader DC and DC Pro not Adobe.  Once I have it open as a Pro it works beautifully and I could edit.