at the time of the twinning of a device they must both be online

Similar Questions

• Bose AE2w gives blue screen at the time of the twinning

  Hello Experts,

  When I try to add the bluetooth headset from Bose AE2w on my laptop (Fujitsu S760 windows 7-32 bit) it gives me a blue screen. The problem is that when pairing the headset via bluetooth, the laptop will be begins searching for updates and it ends with a blue screen. I also tried to install the latest driver for the headset but the end upward with the same question. Any idea, and advises on how to solve this problem?

  Hello samira.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Are you able to connect other Bluetooth devices?
  3. That you get a blue screen often or is that when you try to connect your Bluetooth headset?

  I suggest you try to plug the Bose AE2W headphones on another computer to rule out the possibility of a bad headphone. The steps I mean generally help diagnose the problem with the help of the automated troubleshooters and move you in the right direction to solve the problem.

  Method 1:

  Run the tool material and devices and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  To control how your computer with Bluetooth devices pairs follow the steps.

  1. Open Control Panel by clicking the Start button, then Control Panel.
  2. In the control panel search box, type Bluetooth, and then click change Bluetooth settings.
  3. In the Bluetooth settings dialog box, click the Options tab and do one of the following:
     Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.
  4. When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.
  5. To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  To be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Try to change the settings for the Bluetooth compatible device and check.

  Change settings for a Bluetooth compatible device device:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  You can also check out the link below for troubleshooting

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3:

  In addition to the above methods, I suggest you follow the steps in the section: Bluetooth® troubleshooting in the following link:

  http://worldwide.Bose.com/ProductSupport/en_US/Web/ae2w/page.html

  In addition, if the blue screens are common, please see the following link:

  Resolve stop (blue screen) error in Windows 7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• two device to listen to music online at the same time

  I have only one subscription, but I can't listen to music online of my two devices at the same time... If I buy the family pass... could do?

  Thank you, Diego

  Hello desorejonaremos,

  Thank you for using communities of Apple Support.

  If I understand your message that you are not able to listen to your music on two different devices at the same time. With an individual membership of Apple's music, you can play music online 1 device at a time. It also allows you to play your music offline for up to 10 devices. If you want to listen to your music online from multiple devices at the same time, a family membership will give you this ability for up to 6 devices.

  This article presents additional information on the operation of Apple's music with a family membership:

  On the Apple music

  With a family membership at Apple music, families of up to six people can enjoy all the benefits of Apple music, each with their own library.

  To use a family membership, you must first set up sharing of family. Then, when you join Apple music, choose a family membership. When your family members join music Apple, they must use the same ID share Apple they used to join the family. After they join Apple music and you connect with Apple ID them, they will automatically be added to your family members.

  You can also change for a family membership when you you affiliate.

  Best regards.

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• We just do the last update on Photoshop - that's why whenever we now open photoshop you have to select all the toolbars we want.  They used to be there for example, layers, tools, colors, etc., but now, we have to select each time

  We just do the last update on Photoshop - that's why whenever we now open photoshop you have to select all the toolbars we want.  They used to be there for example, layers, tools, colors, etc., but now, we have to select each time

  You look at the new start screen and files recent screen.  Press ESC to return to your usual workspace.

• reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went

  reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went bar & customize window title bar changed...

  By default Firefox will be "reduced to adjust." You who can disable in layout in a regular window or in print preview, but it's hard to call Preview in the window pop up in print, because the menu bar and the toolbar are removed. If it is a common problem, you can use a different add-on (!) which puts the print preview before printing and Page Setup on the shortcut menu.

  I have not used for some time, but I hope that it always works in Firefox 29: https://addons.mozilla.org/firefox/addon/printprint-preview/

• Firefox is very slow to respond when you open and almost always no longer meets the total even refusing to respond to the Task Manager "end program command @.» The ' does not not @ error also happens during navigation online.»

  Firefox is very slow to respond when you open and almost always unresponsive altogether, refusing even to respond to Manager task "End program" command. The "not responding" error message is also over browsing online. Several attempts must be made to get online. A loss of stability seems to be endemic at the present time.

  Try to follow the instructions here: Firefox crashes or does not - how to fix

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Satellite M40X - solve the problems of "Problem Devices"

  I recently installed windows XP on a TOSHIBA laptop and I have three problem devices listed. My own efforts to solve this problem have failed, so I hereby call for help.

  Information items is the following: -.

  SUMMARY OF SYSTEM INFORMATION
  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the system MIKE
  The TOSHIBA system manufacturer
  System model Satellite M40X ===> Satellite M40X 185
  Reference: PSM4XE-00Y00GFR
  System Type X 86-based PC
  Processor x 86 Family 6 Model 13 Stepping 8 GenuineIntel ~ 1596 Mhz
  BIOS Version/Date TOSHIBA V1.20, 31/03/2005
  SMBIOS Version 2.34
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MIKE\user1 user name
  HIS Western time zone standard time
  768,00 MB total physical memory
  Available physical memory 508,17 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Pagefile 1.83 GB of space
  Paging file C:\pagefile.sys

  PROBLEM DEVICES
  Network controller, the drivers for this device are not installed.
  PCI modem, the drivers for this device are not installed.
  Video controller (VGA Compatible) drivers for this device are not installed.

  My interest is in obtaining the list of problem devices cleared up.

  Hi, there are M40X drivers on the website which should solve these devices unresolved.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Install the graphic display driver /, the modem driver and network/network driver, wireless LAN driver.

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• a trick to find the drivers for "unknown devices".

  I see a lot of messages on the forum in which users try to find the drivers for "unknown devices" in the Device Manager.  That's how I usually go on the search for drivers for these users.  I thought that the community, this may be useful.
  
  I use a site called pilot identifier.  However, I do NOT use the stand-alone application.  I'm NOT suggesting that do you.  I have not used the app, so I can't speak to its usefulness.
  
  I use the site to determine exactly what is the material element.  To do this, the site doesn't have a search function, I use a updated Google search the.  I will now give the steps with examples.
  
  First of all, you need the hardware ID for your hardware.  To locate this information, follow these steps.

  1. Click Start, type "Device Manager" and press ENTER.
  2. Look for the device that needs a driver.
  3. Right click on the device and select Properties.
  4. Go to the tab "Details".
  5. Select hardware ID from the drop-down.

  Here is an example of a hardware ID:

  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_103C3047 & REV_1001.

  I then use this Hardware ID and Google to determine what the hardware item by searching for the use of the site: modifier for Google.  So, my research looks like this
  
  "site:www.driveridentifier.com .

  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_103C3047 & REV_1001.
  
  When I go to the first result, it will be, in general, identify the material at the top of the page.  Here is the page for my research above.   The page identifies audio material like "realtek high definition", which is correct because it's the hardware for my sound card ID.
  
  Now, on this page if you scroll down it gives you a list of all OEM drivers for this piece of hardware.  However, you cannot download the drivers from them without having to install their software.  What I do is so, note the name of the driver for HP.  In this case, you will see that she is named "sp59642.exe".

  Because I can not download the driver from the website, or even be directly connected to HP's Support site from there, I still use Google.
  
  This time, I use a search of "sp59642.exe" in Google, which returns this page as the first result.

  I can't always find the executables that are listed by pilot identifier.  For example, I can't locate sp59660 or sp59662 who are both on the same list.  So it may take a few tries to find a driver, but I had some success using this method.

  I hope the community finds this useful tip.  Have a great week everyone!

• camera to the iMac does not work, you must start

  Got an iMac 27 inches by the end of 2012. Lately the built-in camera will stop working. If I restart it, it works fine. And it continues to work properly. I think that something is happening when he sleeps all night, or for a long time during the day. I called the Japan Apple here, and they had me to do that thing where you hold Option, command and... P and R? There is a name for it, but I forgot. I'm going to call Apple again, but if anyone has some smart ideas for me, I'm all ears. Thanks in advance.

  Reset the SMC and see if that helps, you can also reset the PRAM. Instructions for both are in the iMac Intel SCM and reset the PRAM

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• Determine the presence of a device

  Y at - it a simple method to test for the presence of a device?  I have a chassis 9172 that I sometimes forget to put on for my mistakes of LabVIEW VI on the first time he's trying to do something with the material (and I need to resart the VI and re-enter the selections of GUI ).

  I would like to find a nice simple way to test to make sure the cassis is connected to the PC and turned on and if it does not give a not so subtle remicer to do before the real test of the code portion.

  Any ideas?

  You can look at this thread. Also, what kind of communication do you have in your application now? What devices you expect to be there? I have to assume that your applications run if the chassis is running. So you knew the equipment that connect you with now. Any request for State of the any of these devices does not suffice for you to determine if the chassis is here or not. If you can connect and get an answer, you're good to go. If this isn't the case, you must create a user switch on the chasis, connect or other problem.

  For your application, you can use an architecture of producer/consumer or a state machine which would allow you to stay in the initialization state before continuing, if you cannot communicate with the device.

• Lack of cRIO 9154 in the add targets and devices dialog box

  Hello again all you lovers forum useful!

  I have an existing LabVIEW project which includes a Hypervisor PXI real-time target.  One of the devices that target is a chassis cRIO 9114.  I now need to add a cRIO chassis additional 9154 so according to a conditional disable signal, I can modify my code to talk to the old chassis or the new chassis, which keeps my modular code across different hardware.

  However, I write my code update on my regular computer which is not hooked to the target, so when I right click on the target of the hypervisor in my project and select new-> "targets and devices...". ", I can not select the" existing target or device "to be detected automatically.  Instead, I click on the 'new target or device' to add just anyway, and I expand the CompactRIO there, and... no 9154.  I have a bunch of other cRIO features (see screenshot), including the 9114, but no 9154.

  I guessed that maybe my LabVIEW installation (2012 SP1) know not this chassis when it was released last year, so I tried to install the latest drivers from device with discs on developer LabVIEW 2013 that I just got, but he hung up during installation (the first time at 0% the second time at 27%, listed as "Validating install" for long, long before I was abandoned and cancelled).  I restarted my computer, but no change to this problem.

  Does anyone have any ideas as to why I can't choose a newer chassis to insert in my project without that it is actually attached to my computer?  And I was too quick to renounce installation of the driver, not that I don't know if that would have solved the problem anyway?  : PEI

  Thanks for your help, as always,.

  -Joe

  

  Hello Joe,

  The 9154 NOR is a RIO MXI-Express chassis that's why it should appear under the section of chassis MXIe-RIO.

  

  For installation if you are concerned that it has not installed correctly, you can try run a repair on the NOR-RIO software and look at MAX to see if you have RIO 12.1 or 13.0.