At what stage of the treatment we use a rule to update to apply logic to the way the data are updated in the database?
Hello
At what stage of treatment do you use a rule to update to apply logic to the way the data are updated in the database?
Rahul
Hello Rahul,
Update the existing record or a data object
Thank you
Tags: Marketers
Similar Questions
-
What process in the database is high in the Oracle system resources
Hello everybady,
I am beginner.
How can we control or analize what process in the database is high in the Oracle database system resources?
Could you please help this issue?
Thanks and greetings
A tuba.Please read SQL and PL/SQL FAQ
------------------
Sybrand Bakker
Senior Oracle DBA -
What happens if the database down.
HelloI have jobs that are running every 2 minutes. Suppose if the database falls down due to unknown reason. What would happen to the jobs? It will resume from where it gets abandoned when the database is restarted?
Please enlighten me on this
Thanks in advance.
Concerning
Ravikumar.A
Version of DBOracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
To be reusable, work should generally be coded in such a way that he wrote regularly to a kind of table of State he also read from and he broke up its work in separate smaller transactions. Who can get pretty complex in general.
If you have a cron job which runs every few minutes, it seems unlikely that it is sentence to sentence pass it the trouble to write a reusable job rather than to accept simply that if the database fails, you potentially lose a minute or two of treatment. It is much more common for people who write loads of data warehouse that can take hours to run to go to the effort of writing redemarrables jobs in case a failure occurs 3 hours in a 4 hour process.
Justin
-
What happens when the database in backup Mode?
Hello
What happens when we kept the database in backup mode, by using the command "Alter database Begin Backup" means;
Thank you...
ASITOK, now my query is whether Oracle freeze the data file header and information is stored in the log file of restoration by progression. So if my backup job continues for 30 min and at the same time someone did some update of database, then how these updates to the information written back to the data file after "Alter Database End Backup'.»
Oracle only blocks data file headers, no body. Modified blocks will be stored in data files (at control points) even in backup mode.
If checkpoint has not arrived yet after this update and validation, and DB has decreased, then when it will start it will redo-log automated recovery.Published by: user11181920 on Sep 21, 2012 11:54
-
What stage of the process can dps I installed xcode?
I work on a mac pro 10.7.5 and I can't install xcode on this machine. However, I got a private laptop that runs on maverick.
I can build a folio on my macpro and view it on my ipad using the adobe Viewer.
So, I need to become a developer and install xcode on my laptop.
Can I create the Folio on my macpro and when the folio is finished the publish of the laptop? (from the producer of folio)
Martin is correct that you need not Xcode. You just need Application Loader, which is installed when download you the Xcode SDK. Installation of the SDK also deals with the intermediate certificate required when you use the site developers Apple iOS to create App ID and certificates, but you can do it manually. Personally, I prefer to install Xcode.
Application loader but now we used to work on Mac OS X 10.6, 10.7 or higher. At some point, Apple may require 10.8 or later version, you're probably better off using your computer running Maverick.
-
How to display one value different, other than what is in the database in a field
I have a frame repeatating (corresponding to a single request).
There are 6 fields (columns) in th RF.
Now say in one column, database values are like 1,2,3,4 etc...
I want to show "ASSIGNED" is set to 1, INPROGRESS, corresponding to the value 2, etc...
Could you please tell me how can I do?
ConcerningHello
You can create a formula column in your query and try code below. The formula column must be char as a return data type
IF :column = 1 then return 'ASSIGNED'; ELSIF :column = 2 then return 'IN PROGRESS'; ELSIF :column = 3 then return 'VALUE3'; ELSIF :column = 4 then return 'VALUE4'; ELSE return 'VALUE5'; END IF;
Concerning
Maury
Edited by: ManojP on July 19, 2010 07:26
-
update set to update the data in the database.
At what stage of the treatment I have to use a rule to update to apply logic to the way the data are updated in the database?
Hello
You can use the update rule to update the data in the database.
Thank you
edynamic Experts Eloqua
-
What is a rule to update...
Hello
Please explain what a rule to update...
Thank you
Hello
A rule to update part of a stage treatment or program, a rule of update, updates data on a record of contact with the field.
Thank you
-
Install HRCS 9.0 R5 with problem of Linux: HRCS90 of the database has no table PSSTATUS
People,
Hello. I was installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and Windows XP-based client computer. The architecture of my internet is WebLogic11g/Tuxedo11g/OracleDatabase 11 GR 1 material. PeopleTools 8,53 works correctly in the browser.
In the database server Oracle Linux 5.10 machine, I run scripts 'createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql' one by one. Can I use Data Mover to load Windows XP data into the Oracle Linux 5.10 DB HRCS90 instance. The Data Mover script hrcs90ora.dms is done correctly in Windows XP. Configuration Manager is configured correctly. But when I login in the application designer, I can't connect and get the message as below:
«Security Table Manager (Get): the database is release 8.52.» The PeopleTools running require databases at 8.53 release. »
I followed the http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf document to upgrade HCM and HR 9.0 revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I did in chapters 4 and 5. But the connection to the application designer and start the Tuxedo application server can always put the same error message: "the database is release 8.52. The PeopleTools performed require a database at 8.53 release. »
I ran 4-3-2 of the task script ptddlupg.sql and PSIMAGE2 tablespace is created successfully.When I run rel853n.sql script Task 4-3-5, I see the first line table PSSTATUS does not exist.
The big problem is that there are no PSSTATUS table in my database HRCS90. I activated Windows XP Data Mover C:\PT8.53\log\hcengs.log as below:
... ...
The remaining records: 7687
Import PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS
Indices of real estate required for PSSTATUS
Update statistics for PSSTATUS
The remaining records: 7686
... ...
As we see above, the hrcs90ora.dms script load PSSTATUS table in the instance database HRCS90. But the PSSTATUS table is not in HRCS90.
My questions are:First of all, why is there no PSSTATUS table in my HRCS90 database? What stage is the problem? How to fix?
Second, does run the hrcs90ora.dms script in Windows XP Data Mover to load data in HRCS90 under Linux, yet due to no PSSTATUS table?
Thank you.PSSTATUS is the property of the accessid, means that the user Oracle appearing in PSDBOWNER.
You are not connected with this user but you can ask PSDBOWNER because there's a public synonym, which is not the case for PSSTATUS.
But I think you missed the point that upgrade scripts must be run with this accessid (again, it is the owner of the Peoplesoft tables).
In front of your whole posts on this same forum, I am always surprised you make this mistake, if I remember correctly, this point has been said several times for you.
Nicolas.
PS:
> Moreover, can't copy and paste the contents of my computer on the Forum. My browser there problem or the Forum have problem?
It is a known bug in the forum in a configuration of your browser/operating system...
-
Connect to the database that has lost access to a partition
Hi all
Suppose we have a partitioned table that look in some storage (physically) different. If the database lost access to one of them, what happens? The database can be loaded? If the user is unable to connect to the database, what can we do to solve the problem (because one of the characteristics of partitioning is availability)? If a user tries to get some data (by request), oracle will declare that a partition is not available and so the information may be incomplete?
Best regardsInteresting, above should work without error, as is explained in the following note:
* How drop a Tablespace offline when the Partitions of a partitioned Table resides in [ID 267125.1] *.
I wrote my previous post based on my memory of a similar situation several months ago, but I tested it again now:
SQL> create tablespace part01 datafile 'C:\oracle\base\oradata\ORCL\part01.dbf' size 10M; Tablespace created. SQL> create tablespace part02 datafile 'C:\oracle\base\oradata\ORCL\part02.dbf' size 10M; Tablespace created. SQL> create table t1 (id number, text varchar2(100), constraint id_pk primary key (id)) partition by range(id) ( partition low values less than (1000) tablespace part01, partition high values less than (2000) tablespace part02 ); Table created. SQL> insert into t1 select rownum, 'hello' from dual connect by level <2000; 1999 rows created. SQL> commit; Commit complete. SQL> shu immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> exit Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning option del C:\oracle\base\oradata\ORCL\_part01.dbf sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Sun Apr 21 10:36:35 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning option SQL> startup ORACLE instance started. Total System Global Area 2137886720 bytes Fixed Size 2256912 bytes Variable Size 1392513008 bytes Database Buffers 738197504 bytes Redo Buffers 4919296 bytes Database mounted. ORA-01157: cannot identify/lock data file 5 - see DBWR trace file ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF' SQL> alter database datafile 5 offline drop; Database altered. SQL> alter database open; Database altered. SQL> select count(*) from t1; select count(*) from t1 * ERROR at line 1: ORA-00376: file 5 cannot be read at this time ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF' SQL> select count(*) from t1 where id >= 1000; COUNT(*) ---------- 1000
Note that, drop partition might work, based on the structure of the table / index, but I created an example where it does not work.
SQL> alter table t1 drop partition low; alter table t1 drop partition low * ERROR at line 1: ORA-00376: file 5 cannot be read at this time ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF' SQL> create table t2 as select * from t1 where 1=2; Table created. SQL> alter table t1 exchange partition low with table t2; Table altered. SQL> select count(*) from t1; COUNT(*) ---------- 1000
-
I have to add new contacts in the database. Should what stage of treatment I add?
I have to add new contacts to the database. Should what stage of treatment I add?
Hello
Please use "Save to the Contact Table" stage of treatment.
Thank you
edynamic Experts Eloqua
-
What stage of treatment do you use for email autoresponder to each sender form?
Hello
What stage of treatment do you use for email autoresponder to each sender form?
Thank you
Hello
You can use option send email.
Thank you
-
What will be the form of the file (file://) Protocol in firefox? Using file://servername/foldername, I am uable to open a folder. But it
supported in other browsers. Need a quick solution to this issue.
I used following code snippets:
< a href = "file://PC2/c$" > open the file < /a >
It is used to open C: /. But it does not work in other browsers except Mozilla.Need a solution as soon as possible...
See also:
-
I looked under bookmarks position as well as history. What happened to the "bookmark all tabs" extremely useful. Loved this feature of Firefox. Thank you!!!
Click right on a tab to see this menu item or use {Ctrl + Shift + D}.
In collaboration with the new button of Firefox in Firefox 4.0 and with the addition of some new features that adds a number of new items to the menu, many of the menu items older have been moved or appear only in certain conditions. It can be a bit confusing until you get used to the changes, but beyond the addition of new menu items for the new features in the future, I don't think that there will be major changes like this for awhile.
-
What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.
If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)
Maybe you are looking for
-
Impossible to properly apply a style
This is the second time when I can't do a paragraph style be applied in a way that it is supposed to. Say, I use tripped 18pt, bold font style. I select a portion of text container and make a style of it. I then click the style to assign to a new par
-
My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help
-
UltraExplorer and presented by Sebas Windows is on my pc (I have not installed it)
There is something on my computer, now that is called Ultra Explorer and Windows Vista I have not installed and said: presented by Sebas http://sharingcentre.info Submitted by Sebas http://sharingcentre.infoDirect line: 0.12.22.32.42.52Thank you for
-
HP Photosmart C4795: remove the printer to computer
I have a HP Photosmart C4795 who stopped working so I bought another one same model c4795 and my question is that I have to remove the old printer to my computer before I plug in the new? Also I don't have a cd for the new so I can use the old cd? Th
-
Where can I buy a product key of Windows 8 code
I have windows 8 pro already responsible, but lost my key code product where I can go and buy a new product key code to activate?