ATG 11 error when loading categories

Similar Questions

• LabVIEW 7.1 gives error when loading files

  Hi all

  I get missing VI error when I opened a file .vi .it charge about 480 sub translation problem - VI I face is that by loading of the Subvi

  will lack & when I opened this particular sub - VI, then the error message goes away.this is not specific to a particular subvi.anytime

  I open the program list of the vi missing is not the same as the earlier.since I'm going to convert it into a .exe file & if missing a few vi

  so this is incorrectable.also massive compilation is not the case

  in the hope of a quick response

  Dhiraj Kumar

  Hello

  Is not the problem of Version 7.1, I think you may have changed the location of the Subvi or changed the name of the VI. So generally I suggest you to keep all the Sub - VI slot in the same place, all in the same folder and link to the VI main if you change the name also to relate to the main VI and then save. To do this, and then create the EXE file.

• Forcing errors when loading essbase nonleaf data loading

  Hi all

  I was wondering if anyone had experience forcing data load errors when loadrules is trying to push the nonleaf members data in an essbase cube.

  I obviously ETL level to prevent members to achieve State of charge which are no sheet of error handling, but I would however like the management of the additional errors (so not only fix the errors).

  ID much prefer errors to be rejected and shown in the log, rather than being crushed by aggregation in the background

  Have you tried to create a security filter for the user used by the load that allows only write at level 0 and not greater access?

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Java Application error when loading Firefox 6

  Since the upgrade to ver. 5-worm. 6, I get the following error message every time I load Firefox: ' [JavaScript Application: load: TypeError: Components.classes['@checkpoint.com/XPCOMTrustCheckerMozilla/TrustCheckerMozilla;1'] is not defined. " I've already disabled and re-enabled so all my modules and plugins and none cause this problem. I use ZoneAlarm firewall on my system Win7 but disabling it does not the error message disappears. I have not had this problem with previous versions of Firefox. What else can I do to fix this problem?

  Zone alarm that is installed into Firefox, toolbar is not compatible with Firefox 6. Your Add-on Compatibility Reporter registration on your extensions, can or can is not working correctly. Until Zone Alarm free update (no ETA), you need to disable the following:

  • -Add-ons > Extenstions > 1.5.322.0 ZoneAlarm security engine
  • -Add-ons > Plugins > npFFApi 1.0.0.1

  Zone alarm Forum: http://forums.zonelabs.com/index.php

  • Search for Firefox 6 views

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Satellite Pro A10: Error when loading the drivers and other things

  Hello.
  I just bought a spare A10 to ebay. I already have an A10 and the company. Powering up the new A10, I have a bubble message from microsoft saying that it was unable to load the drivers for the cd burning software, please update the drivers. If I click on the bubble it says to update of real player, roxio or other recording software.

  As I did not immediately and there not there when bought. Its not broken, its all just annoying. Also when I right click anywhere on the desktop, in the coloum that you see, I get a link to an adult site, how can I get rid of this?

  I want to thank you for taking the time to read this and would be grateful if you could help.

  Jack.

  Hi Jack,

  I suggest you to check what is actually underway when you start your new A10 using MSCONFIG. This will then stop these tasks that you do not want to be started up and should prevent your error message displayed.

  I also suggest you download and install a copy of AdAware http://www.lavasoft.com (and perhaps also http://www.spybot.info/en/download/index.html SpyBot) and do a check complete of your new A10 to remove any nasties that may be hiding there.

  It seems that if the previous owner has removed some of the software they had installed, but is not completely cleaned afterwards.

  Finally, I personally use a freeware CCleaner http://www.ccleaner.com/ for utility call which is excellent to remove the pieces left over on my laptop. It must be treated with some caution, because it is a powerful utility, but it is very quick and thorough.

  Kind regards

• that means 50 error when loading new software

  I just bought a Samsung mobile with MP3 player and while trying to load the software on my laptop Windows 7 Asus it returned with system failed error 50 could you let me know what to do to fix this please

  Hello

  1 did you do changes on the computer before the show?

  2. What is brand and model computer?

  I suggest you to see the link:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

• Error when loading of the APEX listener, appex_rl and appex_rt not found

  Trying to load the earpiece of the APEX, but 'appex_rt is not configured and errors will be ignored ", also for appex_rl, now it is stuck on @48231ms.

  Previous stages of the installation went well.

  He started very well...

  

  then got the errors, but he continued... (see SEVERUS)

  

  final State, another error, now it is stuck

  

  

  Hi Wm Peck 1958

  WM Peck 1958 wrote:

  Trying to load the earpiece of the APEX, but 'appex_rt is not configured and errors will be ignored ", also for appex_rl, now it is stuck on @48231ms.

  Previous stages of the installation went well.

  How do you use ADR/APEX listener? Autonomous/deployed on Java EE server?

  Want to host RESTful web services on your instance APEX?

  Looking at the error you found, it is because:

  During the installation of the ADR, he asked three databases users? : APEX_PUBLIC_USER, APEX_LISTENER and APEX_REST_PUBLIC_USER.

  Whose APEX_PUBLIC_USER is required for the operation of the Applications Oracle APEX. APEX_LISTENER (which corresponds to the configuration of apex_al) and APEX_REST_PUBLIC_USER (which corresponds to the apex_rt configuration) in ADR are required for the accommodation of RESTful services.

  The problem, I think it's that you haven't configured the RESTful services before installing ADR where the APEX_LISTENER and the APEX_REST_PUBLIC_USER does not exist and so the configuration of the ADR fails.

  It is fine if you do not configure the RESTful services (just want to use Oracle APEX), but when the ADR facility you should ignore configuration APEX_LISTENER and APEX_REST_PUBLIC_USER accounts.

  Moreover, I think that you use EA(Early Adopter) version of ADR version 3.0 of knowing, but I think you should go for the stable version of ADR version 2.0.10 Viz.

  The ADR 3.0 configuration is more advanced (complex bit) than the 2.0 because it contains information about 5 database users (i.e., APEX_PUBLIC_USER, APEX_LISTENER, APEX_REST_PUBLIC_USER, ORDS_METADATA and ORDS_PUBLIC_USER).

  Finally, I think you want the instance Oracle APEX for purposes of personal training, using Gateway (EPG) of embedded PL/SQL would be sufficient now as suggested by fac586 here: Re: getting started with APEX after download

  Suggestion: You should post data Services Oracle REMAINS related matters to the appropriate i.e. forum ADR, SODA & JSON in the database.

  Reference:

  • For ADR 2.0 installation guide
  • For ADR 3.0 installation guide
  • Installation of Oracle APEX, with EPG guide.

  I hope this helps!

  Kind regards

  Kiran

• Muse brings up errors when loading!

  Is anyone listening Adobe! I've had problems with Muse for awhile now. I don't think what should I pay for a product that comes in won't load and shows errors. I have not used Muse for more than 3 months! Muse stops as soon as I start the programme of work. Dreamweaver had also begun to stop working, but when I rebuilt my PC, this sorted on the issue, but NOT for Muse. Even the upgrade for 2015 of Muse has not resolved the issue! You can resolve this issue as soon as POSSIBLE!

  Hello

  If please try following steps and let me know if it works for you.

  1. close the Muse CC 2015

  2. go after locations in your machine C:\Users\\AppData\Roaming ( is your user profile)

  3 once there below search folders and move them around on the desktop or in a folder on the desktop

  • com.adobe.AdobeMuseCC.2015.0
  • com.adobe.AdobeMuseCC.2014.3
  • com.adobe.AdobeMuseCC.2014.2
  • AdobeMuse

  4. do the same with the following folders within C:\Users\\AppData\Roaming\adobe

  • Adobe Muse CC
  • Adobe Muse CC libraries
  • Adobe Muse CC library

  5. Once done start Muse again and it should work

  Please let me know if the issue still persists.

  Concerning

  Vivek

• Conversion error when loading Dimension data

  Hi all
  
  I learn AWM, follow the steps mentioned in the documentation of the OBE.
  
  When I try to load the data in a dimension using dimension keep option in AWM it throws error as
  
  * "INI: error creating a generic Manager definition to TxsOqConnection::generic < BuildProcess > INI: XOQ-01600: OLAP DML error" ORA-35564: cannot convert the VARCHAR2 type (225) for the type DATETIME. "while executing DML"SYS. " AWXML! R11_LOAD_DIM('D_DATE.) CALENDER_MONTH. LEVEL ' SYS. AWXML! ___R11_LONG_ARG_VALUE (SYS. AWXML! ___R11_LONG_ARG_DIM 1) 'MATCH' 'YES' 'NO' ' D_DATE. LONG_DESCRIPTION. ATTRIBUTE ' ' D_DATE. SHORT_DESCRIPTION. ATTRIBUTE ' ' D_DATE. CALENDER_MONTH_LONG_DESCRIPT. ATTRIBUTE ' ' D_DATE. CALENDER_MONTH_SHORT_DESCRIP. ATTRIBUTE ' ' D_DATE. CALENDER_DATE_HIE. (HIÉRARCHIE ') ', generic TxsOqStdFormCommand::executeINI: 01601 XOQ: error loading of the Dimension of Cube data «GLOBAL_AW.» D_DATE' in the analytical, generic workspace to TxsOqStdFormCommand::execute. "
  
  I use AWM 11.2.0.2.0B and Oracle DB 11.2.0.1.0. Here is the structure of the table of DIM_TIME,
  
  DATE_KEY NUMBER (12.0)
  DATE_NUMBER NUMBER (18.0)
  DATE_CAPTION VARCHAR2 (225 BYTE)
  DATE_LONG_CAPTION VARCHAR2 (225 BYTE)
  DAY_CAPTION VARCHAR2 (225 BYTE)
  MONTH VARCHAR2 (225 BYTE)
  YMD_HYPEN VARCHAR2 (225 BYTE)
  DMY_SLASH VARCHAR2 (225 BYTE)
  DATE OF DATE_DTM
  CALENDER_YEAR NUMBER (18.0)
  CALENDER_MONTH NUMBER (18.0)
  CALENDER_MONTH_CAPTION VARCHAR2 (225 BYTE)
  CALENDER_WEEK NUMBER (18.0)
  CALENDER_DAY VARCHAR2 (225 BYTE)
  CALENDER_QUARTER NUMBER (18.0)
  FINANCIAL_YEAR NUMBER (18.0)
  FINANCIAL_QUARTER NUMBER (18.0)
  FINANCIAL_QUARTER_CAPTION VARCHAR2 (225 BYTE)
  DATE OF PRIOR_DATE
  DATE NEXT_DATE
  DATE OF FIRST_OF_MONTH
  DATE OF LAST_OF_MONTH
  DATE OF START_OF_WEEK
  LAST_OF_WEEK TANK (18 BYTES)
  WORKING_DAY VARCHAR2 (1 BYTE)
  PUBLIC_HOLIDAY VARCHAR2 (1 BYTE)
  PUBLIC_HOLIDAY_NAME VARCHAR2 (225 BYTE)
  
  I created a D_DATE in AWM dimension with the following levels,
  
  ALL_YEARS
  CALENDER_YEAR
  CALENDER_QUARTER
  CALENDER_MONTH
  CALENDER_DATE
  
  and the hierarchy created in the same order as shown above. Here is the mapping for these levels,
  
  ALL_YEARS
  Member = "All_Years."
  Long description = "all years".
  Short Description = "all years".
  
  CALENDER_YEAR
  Member = GLOBAL. "" DIM_TIME ". CALENDER_YEAR
  Long description GLOBAL =. "" DIM_TIME ". CALENDER_YEAR
  Short Description = GLOBAL. "" DIM_TIME ". CALENDER_YEAR
  
  CALENDER_QUARTER
  Member = GLOBAL. "" DIM_TIME ". CALENDER_QUARTER
  Long description GLOBAL =. "" DIM_TIME ". CALENDER_QUARTER
  Short Description = GLOBAL. "" DIM_TIME ". CALENDER_QUARTER
  
  CALENDER_MONTH
  Member = GLOBAL. "" DIM_TIME ". CALENDER_MONTH
  Long description GLOBAL =. "" DIM_TIME ". CALENDER_MONTH_CAPTION
  Short Description = GLOBAL. "" DIM_TIME ". CALENDER_MONTH_CAPTION
  
  CALENDER_DATE
  Member = GLOBAL. "" DIM_TIME ". DATE_KEY
  Long description GLOBAL =. "" DIM_TIME ". DATE_DTM
  Short Description = GLOBAL. "" DIM_TIME ". DATE_DTM
  
  You could someone please help me solve this problem?
  
  Thanks and greetings
  M trehout

  As you can see, the attributes of the description of long and short are both defined as the DATE. The simplest solution would be to redefine (e.g. using AWM) to be VARCHAR2 of sufficient length. Go to the 'Détails' tab for each attribute change the data type. Once done, check the change by describing the view again once. The load should go afterwards.

• Cannot find the file error when loading data from text file to Oracle

  Hello
  
  I have an interface where I am loading a data from the text file to Oracle.
  But when I try to do that I am getting following error.
  
  ODI-1227: SrcSet0 (load) task fails on the source FILES SAPMM connections.
  Caused by: java.sql.SQLException: file not found: d:/mdb/#General.get_filename
  to com.sunopsis.jdbc.driver.file.FileResultSet. < init > (FileResultSet.java:160)
  at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
  at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
  
  SAPMM is the name of the connection.
  I use get_filename to get the name of the file and it is fetching a correct value as long as this variable is updated in the previous stage of this interface.
  KM, used for loading is SQL file
  
  What would be the cause of this error?
  
  Thank you
  Mahesh

  Also a single query would be ok if I'm moving only generated package (according to your scenario3) scenario and not UI? It running properly?

  Yes... It runs successfully

• DAC message any plan of running - "Error when loading nodes"

  I just install and configure Informatica 8.6.1, DAC, BI apps 7.9.6 properties for an instance of source Oracle Ebs R12.1.1
  
  In informatica, I've defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names in the DAC's physical data sources
  
  I mentioned the flatfile as 'ORA_R1211_Flatfile' parameter in DAC
  
  After successfully build, when I run the ETL error "Error loading nodes" occurs.
  
  the log file shows the following:
  
  **********
  BEGINNING OF ETL
  
  --------------------------------------------
  20 SEVERUS Sat Apr 23 21:57:58 GST 2011
  FAULT INFO: Error loading of nodes.
  CLASS EXCEPTION: java.lang.NullPointerException
  
  com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
  com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
  com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
  com.siebel.etl.engine.core.ETL.run(ETL.java:658)
  com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.executeEtlProcess(EtlExecutionManager.java:210)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.run(EtlExecutionManager.java:165)
  java.lang.Thread.run(Thread.java:619)
  21 SEVERUS Sat Apr 23 21:57:58 GST 2011
  ************************************************************
  CLOSING THE CONNECTION POOL Data Warehouse
  
  ************************************************************
  
  SEVERUS Sat Apr 23 22 21:57:58 GST 2011
  ************************************************************
  CLOSING OF THE CONNECTION POOL ORA_R1211
  
  ************************************************************
  
  23 SEVERUS Sat Apr 23 21:57:58 GST 2011
  --------------------------------------------
  
  END OF THE ETL
  *****************

  Hello

  Mark the current as EP being completed and re - assemble portion, build parameters, and generate the EP and run charge.

  Thank you
  Navin KumarBolla

• Error when loading data from a file XML using HTTPService

  Hi all

  I have a runtime error that made me beat right now I am building an App in Flash Builder 4 to run on AIR.

  The error is as follows: TypeError: Error #1009: cannot access a property or method of a null object reference.

  What I'm doing:

  I have 2 DropDownList controls, the first is filled with the names of countries and the other with the language options.  All 1 DropDownList control

  set to an image control to display the flag of the country and activate the 2nd DropDownList.

  The 2nd DropDownList control sets the returned variable equal to the language code.  I then call the function in the language and pass it returned .  using this variable, I build the string

  for langFilePath will be equal to the XML file (which is "Lang_GBR.xml") location on my desktop and then call the HTTPService.

  As soon as the function of language is called, the runtime error occurs and highlights the line with btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;

  When I try to assign the label of button with a new value in the XML file.

  I suspect that maybe it's a trivial mistake, but I can't see it at the moment.

  Any help or advice would be appreciated.  Thank you

  Code:

  <fx:Script>
          <![CDATA[
                 
                 [Bindable]
                 public var langFilePath:String;
  
                 public var langDir:File = File.desktopDirectory;
                 public var langCode:String;
                 
                 public function countrySelect_changeHandler(event:IndexChangeEvent):void
                 {
                      switch (countrySelect.selectedItem)
                      {  
                           case ('United Kingdom'):  
                                trace("Item Selected was: "+ countrySelect.selectedItem);
                                img_countryFlag.source = AngolaFlag;
                           break;
                           case ('France'):  
                                 trace("Item Selected was: "+ countrySelect.selectedItem);
                                 img_countryFlag.source = AustraliaFlag;
                           break; 
                           default:  
                           break;
                       } 
                      langSelect.enabled = true;
                      trace("1st dropdownbox");
                 }
  
                 
                 public function langSelect_changeHandler(event:IndexChangeEvent):void
                 {
                      switch (langSelect.selectedItem)
                      {                                          
                           case ('English'):  
                               trace("Language Selected was: "+ langSelect.selectedItem);
                               langCode = "Lang_GBR";  
                           break;
                           case ('French'):  
                               trace("Language Selected was: "+ langSelect.selectedItem);
                               langCode = "Lang_FRA";  
                           break;
                      }
                      language(langCode);
                  }
  
                 public function language(aParam:String):void
                 {
                      trace("Code Was: " + aParam);
                      trace("Lang dir: " + langDir.nativePath);
           
                      langFilePath = langDir.nativePath + "/" + aParam + ".xml";
           
                      trace("File to load: " + langFilePath);
                      trace("loadLangFile.url: " + loadLangService.url);
                      loadLangService.send();
                      
                      btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
                 }
            ]]>
  </fx:Script>
  
  
  <fx:Declarations>
       <s:HTTPService id="loadLangService" url="{langFilePath}"/>
  </fx:Declarations>
  
  
  <s:DropDownList x="10" y="201" id="countrySelect" prompt="Please Select Your Country" width="274" enabled="true" change="countrySelect_changeHandler(event)">
  
  <s:DropDownList x="10" y="348" id="langSelect" prompt="Please Select Your Language" width="274" enabled="false" change="langSelect_changeHandler(event)">
  
  

  Not sure on your XML structure, but for now I see the problem here between these 2 lines of code:

  loadLangService.send();
                   
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;


  Data do you your httpService supposed to receive just cannot go so fast to fill the lastResult before calling it in the following line

  Try to add a listener to result at your service before sending:

  .....

  loadLangService.addEventListener (ResultEvent.RESULT, handler);

  loadLangService.send();

  ......

  function handler(event:ResultEvent):void {

       btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;

  }

• Error when loading an applet

  I'm trying to load a simple helloworld applet in an html area to become familiar with the use of applets in the apex.
  The applet works when it is called from a html file.
  But the apex, the applet appears to start loading and then I get a box with
  "Error. Click for more details".
  
  If I click on the error that nothing happens.
  
  I'm under apex 3.2.
  The java class file has:
  
  import java.awt.Graphics;
  SerializableAttribute public class HelloWorld extends java.applet.Applet {}
  public void init() {}
  Resize (150,25);
  }
  {} public void paint (Graphics g)
  g.drawString ("Hello world!", 50, 25);
  }
  }
  
  The jar Hello.jar file was responsible for static files.
  Apex directian has:
  in the region
  "< CODE ="HelloWorld.class APPLET"archive =" Hello.jar "WIDTH = 500 HEIGHT = 500 >
  < / APPLET >
  
  
  After the applet.
  
  I'm not sure what I did wrong, nor even what the error.
  It's probably something really simple. I have watched a lot of messages on this and think I have things as it should.
  Can anyone help?

  The jar Hello.jar file was responsible for static files.

  The problem is probably that this information was not included in the HTML code:

  no reference to the location of the static files in APEX. Try to use the codebase attribute:

  Also note that the applet element is deprecated and that this object should be used instead.

• I get this error when loading Firefox? He [code] $pendingLocations is undefined - 2, is there a solution to this? Pls

  The problem started a few weeks before and only occurs when it seems to be associated with Java Script but can't do anything present in the error etc. files?

  Has anyone else encountered this problem

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')