ATP assignment together

Similar Questions

• NOTE If ordering: could not able to find a source for the article ATPable

  Hi all

  I'm working on test cases where I need to activate the GOP if ATO model element. This model element is also seen point class option as well as a few a mandatory element and some optional component. Based on the selection of this option, * item will be created. I activated this CD in org1 to org2 and. I do SO the entry of the business unit belongs to the Org1.  Now, I have defined a global sourcing (enabled for all the org) for this model where transfer of org1 and transfer between org2 and is mentioned. In addition, I have created local sourcing rule in org1 than 'doing to org1' and sourcing rule in org2 and as "do to and org2. ATP is enabled for the item required org1 to org2 and. With this completed CAWC full refresh and then I tried to plan without mentioning the shipping warehouse. Here I'm note - 'couldn't be able to find a source; mention warehouse on line SO or set a sourcing rule.  Now if I quote warehouse on SO line, then planning will work perfectly.

  Believe that the GOP is not able to see overall supply rule IE 'org1 transfer' or ' transfer between org2 and. But I can work with local sourcing rule is to say 'make org1' or ' do to org2 and "if I mention warehouse on so.  so I did failed to make any other installation program in order to GOP advise me warehouse and corresponding available date?

  Please notify.

  Thank you / Dipak

  I got this answer to my own question. As we allow the GOP first, we must define certain profile options. as MRP: together for the assignment of ATP and MSC: ATP assignment together. This was missing. After you set this option to profile, it works fine.

  Dipak

• Copy the number of manufacturer.

  Hey guys, I just came back of holiday to another semester, now enter II programming with java. Summer warms up then good, but I found myself with a major and no amount of research in my book, or internet doesn't seem to answer my question about copy constructors
  
  Here's what the assignment tells me to do it for a certain class (the class containing the methods)
  
  It has a copy constructor to make a good copy of the values of another object of RoomDimension.
  
  That's what I created as a copy constructor in the class of my method.
  

       public RoomDimension(RoomDimension aRoom)
       {
            roomLength = aRoom.roomLength;
            roomWidth = aRoom.roomWidth;
            roomHeight = aRoom.roomHeight;
       }

  This as far as I'm concerned seems fair. Problem is that I have no idea how to call it or use the copy constructor in my main class.
  
  I can easily call and assign values to my first constructor as follows.
  

       double doubleLength = 3;
       double doubleWidth = 3;
       double doubleHeight = 3;
       String lengthString = "3";
       String widthString = "3";
       String heightString = "3";
       
       RoomDimension roomDigit = new RoomDimension(doubleLength, doubleWidth, doubleHeight);
       
       
       System.out.print("Area from double's: " + roomDigit.getArea());

  the getArea() method obviously only has the length * width. Despite everything I have once I have create all the necessary methods to test in a class of dump demo to show the teacher each of the
  methods work correctly. This is because at the end of the assignment together we will use all methods, point showing in object-oriented programming, it is important to make several methods that we would not need them.
  
  In all cases, with the copy constructor is, how the hell can I call or even use it? Post the copy or do something with it in my main class. I'm so confuseeed Oo, nothing seems to work.
  
  Thanks in advance I appreciate the help after that my brain began to melt to overreading the manual and the internet.

  Basshunter36 wrote:

  Despite everything I have once I have create all the necessary methods to test in a class of dump demo to show the teacher each of the
  methods work correctly. This is because at the end of the assignment together we will use all methods, point showing in object-oriented programming, it is important to make several methods that we would not need them.

  Who told you that 'in object oriented programming it is important to make several methods, although we might not need them? " That seems suspicious to me. It depends on what is the purpose of your Java class. But, if you create a Java class for your own internal use, it seems you need to create only the methods you need right now. You can always add it later.

  In all cases, with the copy constructor is, how the hell can I call or even use it? Post the copy or do something with it in my main class. I'm so confuseeed Oo, nothing seems to work.

  You must pass an existing RoomDimension to your copy constructor.

  RoomDimension newRoom = new RoomDimension(roomDigit);
  RoomDimension anotherRoom = new RoomDimension(new RoomDimension(1, 2, 3));
  

  I don't know why you define these string values 3. You will never use them.

• While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  

  No, you can't.  One solution is to create 5 different slideshows and export them to the office where you can bring together them in a single quicktime movie file and use it.

  If you have a copy of iMovie 6 HD, it can be hacked to work with El Capitan. With it you can assign exactly music groups of slides in the slide show:

  

  

• View the folders and files together in alphabetical order rather than the records first, then files

  It seems impossible to display files and folders together in alphabetical order.  Instead I see files first and then the files that I often (not always) want

  I have sometimes seen them together but have no idea how this happens.

  Ferrière

  Hello Ferds,

  In Windows Explorer, simply type an asterisk in the search engine to return all the files and folders in the folder parent.  You can click on any column heading to sort the results in this column.

  Mr. Doug in New Jersey

  It is a good workaround (thanks Mr Wizard) If you want to view the files in this way - but the procedure does not correct how Explorer files are sorted in the records themselves. And you will have to do it every time you viewed a folder because the search procedure would not automatically from window to window transfer and may not be assigned to do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Determine the IP address assigned to the laptop using SONICWALL VPN to connect to the network

  Hello

  How can I determine assigned by DHCP IP address internal LAP assigned to a laptop computer after that it connects to our network. We use the client VPN Sonicwall.

  For example, our model of IP network is 10.11.12.x. I guess that any VPN client PC Gets a 10.11.12.x address once the connection is established.

  Thank you!

  Click Start (or press the Windows key) and type cmd , and then press Ctrl_Shift + enter together. This will launch a prompt with high privileges. Acknowledge the UAC warning and provide credentials if necessary. Once you have the command prompt window use this command at the command prompt.

  IPCONFIG/ALL

  If you don't have administrator access on your computer, use cmd with just Enter and this simple command at the prompt window.

  IPCONFIG

  You get your address IP LAN, just not all the information available.

• Cisco ACS, multiple CA, assignment of VLAN relevant to the domain

  Hi all

  I searched for a solution to a specific customer requirement.

  I want authenticate users with certificates from different RootCA wireless and assign them to one VLAN based on their field?  Ideally, using the same SSID and a Cisco ACS server.

  Is this possible?  Has anyone seen that it works?

  I realize that the ACS can have trust company for the relevant RootCA (dunno what version is needed for this?).  And that assignment VLAN is also possible to a unique SSID based on RADIUS attributes.  But I am not sure that these parts would fit together?

  Would appreciate some advice!

  Thanks in advance

  Rob

  Hello

  Yes, this is possible. I suggest that you implement one by one to make sure that everything works, but no problem to do so. All recent versions of ACS allow this.

  You can do mapping group from ad groups (a group for each area, so if you want to) and assign the vlan based on the mapping of this group.

  GBA can trust several certification authorities and authenticate users with certificates of all these cases. It's just a matter of import these number certificate in the trust list.

  And you can assign the vlan and use only one ssid as well.

  I can't guide you on the procedure that it depends on which version you have and if you have IOS ap or WLC, but it is basically each function separated as in the config Guide and just used all together.

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Hello

  The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

  Then assign it to restricted users.

  Kind regards

  Bashar

• Assign a separate value rank

  Hello

  I have the following table:

  CREATE TABLE 'BEFORE' ('LINE' VARCHAR2 (6), VARCHAR2 (2) "PATH", "PK" VARCHAR2 (3))

  /

  REM, INSERTING BEFORE

  TOGETHER TO DEFINE

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '661');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '665');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '665');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '700');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '700');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '775');

  Insert BEFORE (LINE, WAY, PK) values ('570000', 'V1', '775');

  Insert BEFORE (LINE, WAY, PK) values ('680000', 'V2', '800');

  Insert BEFORE (LINE, WAY, PK) values ('680000', 'V2', '900');

  Insert BEFORE (LINE, WAY, PK) values ('680000', 'V2', '900');

  Insert BEFORE (LINE, WAY, PK) values ('680000', 'V2', '900');

  I would like to give a ranking in order to each distinct value in the KM of line and way field.

  Like this:

  CREATE TABLE 'AFTER' ('LINE' VARCHAR2(6 BYTE), VARCHAR2(2 BYTE) 'WAY', 'KM' VARCHAR2(3 BYTE), VARCHAR2(1 BYTE) 'RANK')

  /

  REM in AFTER INSERTION

  TOGETHER TO DEFINE

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 661 ', ' 1');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 665 ', ' 2');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 665 ', ' 2');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 700 ', ' 3');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 700 ', ' 3');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 775 ', ' 4');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V1', ' 775 ', ' 4');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V2', ' 800 ', ' 1');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V2', ' 900 ', ' 2');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V2', ' 900 ', ' 2');

  Insert AFTER (LINE, WAY, KM, GRADE) values ('570000', 'V2', ' 900 ', ' 2');

  Thank you for your help

  Hello

  If you want to assign numbers (1, 2, 3,...) by order of pk without jumping all the numbers and duplicate the numbers when the pk value is duplicated.

  This sounds like a job for the DENSE_RANK function:

  CREATE TABLE after
  AS
  SELECT line
  way
  ,       pk                     AS km
  DENSE_RANK () (SCORE ONLINE
  ,             way
  ORDER BY pk
  ) AS rnk - GRADE is not a column name, good
  FRONT

  ;

  Thanks for posting the CREATE TABLE and INSERT statements; It's very useful!

• How to assign a screen configured messaging task in the workflow

  Man of me but I can't seem to find the solution for this.

  I created a whole screen for task and together the screen created a messaging for the new job template.

  Then I add a task of e-mail to a request workflow, but nowhere can I find a screen parameter which defined the task of e-mail must use.  The properties of e-mail has a drop-down list for which model to use, but it has only one value: e-mail task and who uses the Standard Messaging task.

  I missed a setting that allows me to decide what model/game screen it should use?

  Thank you

  .. Mick

  Hi Mick,

  I guess you missed a step - you must assign the new model to a particular file type "Task - email task" (200).

  Reach

  Admin-> system-> System Administration-> the Types of messages

  and assign to this model.

  After that, you should be able to specify the new e-mail template in e-mail task.

• Panoramic rotation hangs or gives the "result will be to the great" despite the abundance of assigned unused RAM.

  It's 32-bit Elements11 and Elements13 64-bit for Windows.

  I do a lot of panoramas from several photos glued together with Photomerge function.

  When you try to set the slope horizont after merger with manual rotation I get the error "the result will be big" in 11 items on both Windows Vista 32-bit and 64-bit Windows of 8.1.

  8.1 winning RAM max preferences of use was set to 100% 11 elements being only 32-bit program and don't recognize 3Goctets - but I have 8 GB installed.

  When I select the elements of function "Rotate-> Autorotate" stands forever cpu consumption but it never ends the function (at least 30 minutes).

  So, I bought and installed 13 elements version on 64-bit Windows, to 8.1 since Elements13 is 64-bit and should be able to use more RAM available.

  But the same thing is happening here, I adjusted the preferences to use 85% of the 8 GB of available RAM but elements exceeds not using the the / 3Gb and stalls autorotation the same image.

  Autorotation is to always consume cpu power but does never extend the use of the RAM and never complete the rotation.

  The I am Image editing is saved without layers in a flat file jpg and 30Mbyte only in size, but the element points out (in the bottom of the picture frame) to be around 500 MB internally when opened for editing.

  Why do Elements13 not use all the RAM I assign in prefs, and why the items 11 and 13 stall autorotation without giving an error message appropriate?

  And why 13 elements in 64-bit version running on Windows 8.1 in the 64-bit version fail to autorotate or "manually turn" this relative small jpg 30 MB even when file?

  It is possible that has nothing to do with pse not really having enough ram, but the size in the size in pixels of the pano himself.

  As the editor of photoshop elements has a size limit in regards to the pixel dimensions which can be an image, 30 000 30,000 px x px, if you pano is close to this limit, rotation will add to the pixel dimensions

  and so possibly put the pixel dimensions exceeding this limit and this is the reason for the error "the result will be great."

  If you have to Image > resize > Image size, what are the Pixel Dimensions of the pano before trying to turn it?

• How to assign a calculation to a variable in the RTF file?

  Hello

  
  I play a series of if - end if statements to calculate the "Days_Late."

  <? If: DAYS_LATE < 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

  <? If: DAYS_LATE = 0? > * <? end if? >

  <? If: DAYS_LATE > = 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

  I would like to assign the code above to a variable and use this variable in the following logic <? xdoxslt:IfElse (VARIABLE > 0, round (VARIABLE),-1 * round (xdoxslt:abs (VARIABLE)))? >

  to exercise a function of round_up ("symmetric" rounded). Oracle doesn't have a function for this yet...

  
  

  How can I make this work directly in the .rtf file?

  
  

  Thank you

  ATP
  
  

  Hi all

  I didn't change the data (sql).
  Also, I tried to make it work using the xdoxslt:set_variable () and xdoxslt:get_variable () functions. However, this was not necessary and makes more complex than required.

  It is now resolved using a formula of symmetric rounding (rounded to 0):

  I replaced the VARIABLE with my calculation: (sum (DAYS_LATE) count (PAYMENT) div)

  Thanks a lot for the replies and offers to help her

• OIM11g R2 - if two roles (ACF2 and AD) are selected together for a user req

  Hello
  
  We are facing a problem in the catalog, if two roles (ACF2 and AD) are selected together for a user and check. The request goes to the approval process. We have not created any approval process workflow.
  
  Please let me know how to deliver and provide an option to configure two roles at the same time to a user without going into the approval process.
  
  Steps to reproduce:
  1. create a user in the IOM.
  2. search for this user. Administration-> users-> user to MSN Search
  3. click the "Rôles" tab and select "Request for role" on this tab.
  4. "catalog" tab opens. Click on the search icon and add AD and ACF2 role to the basket.
  5. click on "Check out".
  6. click on the "submit" button
  7 ask tab summary opens with the situation as "Getting Request Approval" and the Type of request as 'assign roles.
  Note: If we assign AD and ACF2 individually to the user and race evaluate user strategies, we are able to see configured state tab account user accounts and demand does not go to the approval process
  
  Thanks in advance

  Section 2.3

  http://docs.Oracle.com/CD/E27559_01/admin.1112/e27149/appr_policies.htm#CHDFEFCB

• Administrator system role assignment

  How do you give the Administrator role to a user of 11g R2

  R2 mainly has the new feature called ROLE ADMIN who has the list of roles OOTB and you can assign to any user.

  Click on organization-> research organization-> 'Top'-> open detail page go to the Admin role tab-> select role 'SYSTEM ADMINISTRATOR'-> click on the button "assign"-> the user to find now that you want to assign to the site-> click on the button 'Add'-> finally click ok.

  Make sure that check the option 'including suborganization'. If the user keep on IOM together.

  Why 'Top'-> because the Top is the parent of any organization. If you want the user to be administrator for particular org then you can choose that.

  However, normal role can be assigned using the catalog
  Search for and select user-> open-> tab "My Role" goto detail page-> click on "Demand accounts"-> now add the role of 'SYSTEM ADMINISTRATOR' catalog and finally to complete the request.

• assignment of sequential value that resets to a group of records

  Hello all and happy FRIDAY!
  
  I do a conversion of data to a new system and I can't seem to come with a query.
  
  Running Oracle 10.2
  
  Sample data:

  create table test (GRP number, PART varchar2(20), SEQ number);
  insert into test values(9000, 'lskdjf', null);
  insert into test values(9000, 'alsdk', null);
  insert into test values(9000, '492kjsfjsldk', null);
  insert into test values(9000, 'lkjasdf0982j', null);
  insert into test values(9001, 'likfjajsd', null);
  insert into test values(9001, '234-092838', null);
  insert into test values(8934, '000-192893aj', null);
  insert into test values(8934, 'anotherpart', null);
  insert into test values(8934, 'jjjj0-aa-2001', null);
  insert into test values(8934, 'encifudy', null);
  insert into test values(8934, 'asfdjslkjdfklsj', null);
  insert into test values(8934, 'lksjdflj', null);
  insert into test values(4736, 'l;ask---jdflasj', null);
  commit;
  
  Select * from test;

  Do select * at this stage will give you the elements of nulls for the third column.
  
  Problem:
  I'm trying to run a query that spits out a sequence for each "group" of records. If there are 5 records in a group, I would like the sequence start at 1 and go to 5... may be ordered by a party. (not quite sure that the command, but to do babysteps here): P
  
  Here is an example of the output data, I would like that in the example above:

  GRP     PART               SEQ
  9000     lskdjf               1
  9000     alsdk               2
  9000     492kjsfjsldk          3
  9000     lkjasdf0982j          4
  9001     likfjajsd          1
  9001     234-092838          2
  8934     000-192893aj          1
  8934     anotherpart          2
  8934     jjjj0-aa-2001          3
  8934     encifudy          4
  8934     asfdjslkjdfklsj          5
  8934     lksjdflj          6
  4736     l;ask---jdflasj          1

  In that result, SEQ is not applied to the drive control part, but ultimately, this might be something I would do. So far only community-eager to get these figures here. I read using rankover(), but it's still a bit confusing for me on how it works. I'll go than I suspect it's probably what I'll have to use a search.
  
  In the end, this is part of a slider that is powered by a bulk collect. I might be able to fill this SEQ in PL/SQL, but I thought it would be easier to get them just at the level of the query so that they are already part of the collection, instead of having to build the logic to create this numbering system prior to insertion of an intermediate table.
  
  Anyhoo... any help would be greatly appreciated! If I've omitted something or am not clear anyway, please let me know! Thank you!
  
  Published by: dvsoukup on July 27, 2012 16:25

  Hello

  dvsoukup wrote:
  Running Oracle 10.2

  Sample data:

  create table test (GRP number, PART varchar2(20), SEQ number);
  insert into test values(9000, 'lskdjf', null); ...
  

  Thanks for posting your version and CREATE TABLE and INSERT PMT ts; It's very useful!
  >

  Do select * at this stage will give you the elements of nulls for the third column.

  Problem:
  I'm trying to run a query that spits out a sequence for each "group" of records. If there are 5 records in a group, I would like the sequence start at 1 and go to 5... may be ordered by a party. (not quite sure that the command, but to do babysteps here): P
  I read using rankover(), but it's still a bit confusing for me on how it works.

  You got that right! Analytical functions are looking very strange and confusing at first. After awhile, they don't seem so strange, and then they get even less confusion.
  One thing to remember: "PARTITION OF x" (this is always optional) means that each value of x is a world full. It's like a separate query is made for each value of x, and when they are all finished, the results are clauses together. In this case, you want to PARTITION BY grp.

  I'll go than I suspect it's probably what I'll have to use a search.

  You are very close; only, as the first response said, it is not RANK you want, but its close relative ROW_NUMBER. The difference between the two, it's how they deal with the links. If you have duplicates, RANK assigns a number in doubles. I suppose you want the unique numbers, even if you have identical parts on the same grp.

  In the end, this is part of a slider that is powered by a bulk collect. I might be able to fill this SEQ in PL/SQL, but I thought it would be easier to get them just at the level of the query so that they are already part of the collection, instead of having to build the logic to create this numbering system prior to insertion of an intermediate table.

  It is quite easy to assign numbers when you generate the table.

  If the situation is what you have posted, that is your table already exists, but the number of seq is not filled yet, then you can do:

  MERGE INTO     test     dst
  USING   (
           SELECT  grp
           ,         part
           ,         ROW_NUMBER () OVER ( PARTITION BY  grp
                                                  ORDER BY      part
                             )       AS seq
           FROM    test
       )          src
  ON     (     src.grp          = dst.grp
       AND     src.part     = dst.part
       )
  WHEN MATCHED THEN UPDATE
  SET     dst.seq   = src.seq
  ;
  

  The MERGE statement preceding assumes that the combination (grp, part) is unique.
  Once executing, this query:

  SELECT       *
  FROM       test
  ORDER BY  grp
  ,            part
  ;
  

  will these results:

  `      GRP PART                        SEQ
  ---------- -------------------- ----------
        4736 l;ask---jdflasj               1
        8934 000-192893aj                  1
        8934 anotherpart                   2
        8934 asfdjslkjdfklsj               3
        8934 encifudy                      4
        8934 jjjj0-aa-2001                 5
        8934 lksjdflj                      6
        9000 492kjsfjsldk                  1
        9000 alsdk                         2
        9000 lkjasdf0982j                  3
        9000 lskdjf                        4
        9001 234-092838                    1
        9001 likfjajsd                     2
  

  The USING clause above is almost identical to the query, published in the last post, but in the analytic clause, instead of "ORDER BY grp", part it says "COMMANDER PARTIALLY. He never has any sense to PARTITION BY and ORDER BY the same column in the same function. Why? Discuss.