Panoramic rotation hangs or gives the "result will be to the great" despite the abundance of assigned unused RAM.

Similar Questions

• Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  I solved the problem, installed the installer from mode Windows safe.

• DM4-1140SA (Windows 8 Pro - 32-bit) hardware upgrades - that will give the most bang for my buck

  Laptop specs: http://support.hp.com/us-en/document/c02550724

  Which would improve the more noticeable performance for example change the HARD disc of the SDS, the 3GB DDR3 8 GB RAM DDR RAM upgrade? Could you give an indication of how much improvement I could hope with each of the suggested upgrades? Also, could you give some suggestions of what specifications technical I should look for spare parts.

  In addition, suggestions of software to improve performance would be greatly appreciated?

  Thank you very much. Yan

  The Pro 840 is the one you want. You can't go wrong with a SATA III... even if the computer interface is SATA II, SATA III work as well as a SATA II will and will obviously better on a port SATA III. Here's the memory you want to... DDR3 SO - DIMM 1333 mhz PC3-10600 aka.

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dm4-1140sa

  Here is the Manual:

  Link to the manual

  Page 44 shows replacement memory and Page 53 shows how to replace the hard drive.

  You have 2 slots available memory.

• I'm trying to download the trial version for Acrobat DC edit PDF files, but when download initializes, it gets to 11%, gets stuck, then gives the message "request from Web Get failed. I canceled, downloaded the installer again and got the same result.  I'

  I'm trying to download the trial version for Acrobat DC edit PDF files, but when download initializes, it gets to 11%, gets stuck, then gives the message "request from Web Get failed. I canceled, downloaded the installer again and got the same result.  I'm on a PC running Windows 8. Any suggestions?

  Hiddm93421458,

  Restart your system and then try again to install Acrobat Reader DC using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know if the problem persists.

  Kind regards

  Nicos

• You will have to give the value of the filter at run time condition.

  Hi experts
  
  I have a requirement in which I need to give the value of the filter at run time, for example Project_code = "XYZ"
  The XYZ value should be given at run time. How can achieve us?
  
  Thanks and greetings
  Frank

  Hi Jos,

  1. create a PROJECT_CODE to say as alphanumeric variable, as non-persistent data type and use it as a filter in your mapping.

  2 drag and drop the variable twice in your package make that as a declared variable and in the second stage that do like Variable refresh then in step 3 of your interface.

  3 generate a script and executing that give scenario the value you desired, press enter once you have given, otherwise it will not fetch the entry and make sure that the LAST VALUE is DISABLED.

  This way you can give values to the varaible running.

  Thank you
  Guru

• Acrobat will not open and give the error 312.11 error message

  How can I open professional acrobat when he said: there was a problem with licensing and it gives the error message 213,11? I bought and paid for this software and using it for a few years.

  Hello

  This mainly happens when the SLStore to the C:\ProgramData\Adobe folder does not have permission to create a file. Need write access to this folder to the first launch. Please follow the steps outlined in the Article below:

  Error 213:19 | Problem is the license of this product. Acrobat X and XI

  Let me know if that solves the problem.

• Outlook express 6 when sending a message, the message 'hang up' in the Outbox

  Outlook express 6, when sending a message, the message 'hang up' in the Outbox, don't watch not in the box sent but is sent (confirmed) and continues to repeat the send action.

  I use outlook in private mode and a mode of business, private mode gives problems mode business is good
  In private and commercial modes, do you mean different identities? You probably have the corruption of dbx files in the identity of the problem.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 
   
   
   
  FYI: This is a forum for Windows Live Mail. In the future, you will want to use this forum for Outlook Express.
   
  XP network & online
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking?page=1&tab=all

• Satellite L10 and keyboard:-shift key gives wrong results

  Using the SHIFT key with most of other than a-z keys gives bad result.
  I tried to re - install a driver via Control Panel / keyboard with the Toshiba XP Home CD inserted but not better driver is found.
  Control Panel / regional and language setting is English UK

  Hello, Alan

  It will be nice if you can give us more information. What specific keyboard of the country you have? What you want to do exactly? Give us a few examples please.

• My computer laptop stop periodically and gives the following codes BCCode d1, 00000010 BCP1, BCP2 00000002 BCP3 00000001, 8A25F1C8 BCP4.

  My stop laptop periodically and gives the following codes:
   
  BCCode d1
  BCP1 00000010
  BCP2 00000002
  BCP3 00000001
  8A25F1C8 BCP4

  I was not able to find a solution to restart windows by clicking find a solution online. The system is free of viruses and other items malcious. Any ideas would be helpful because my laptop did not come with a repair disc and I'm afraid to make one with these questions.

  Thank you

  Hello

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of problems and when you get to the section driver view
  for generic methods in the next message and then back to the if necessary troubleshooting tool.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  ======================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Every time I open photoshop, my computer hangs and gives error KERNEL_SECURITY_CHECK_FAILURE

  So if you read the title of this discussion, you will know what it is. Whenever I run the Photoshop application, my computer hangs and gives error KERNEL_SECURITY_CHECK_FAILURE.

  I've already tried everything that I saw made online on other posts, but they do not seem to work.

  If someone could help me with this problem as soon as possible, it would be great.

  Thank you!

  Hi jollylilwoodsman,

  In my opinion, you are using an Nvidia graphics card.

  This questions seems to appear only after the recent update of the graphics card from Nvidia.

  • Navigate to the location - C:\Program Files\Adobe\Adobe Photoshop CC 2015, search the file named sniffer.exe and place it on the desktop.
  • Launch of Photoshop now and it should work fine.

  Note - moving sniffer on desktop, Photoshop will not use your graphics card.

  Another solution would be to install a previous version of the graphics driver.

  Let me know if it helps.

  ~ UL

• ASCIISTR function that gives different results

  Hi Experts,
  
  I use the function ASCIISTR and it gives different results in SQLPLUS and TOAD
  
  SQLPLUS
  

  SQL> SELECT ASCIISTR('é') UC FROM DUAL
    2  ;
  
  UC
  -----
  \201A
  
  SQL> SELECT ASCIISTR('ú') UC FROM DUAL;
  
  UC
  -----
  \00A3

  TOAD
  

  SELECT ASCIISTR('ú') UC FROM DUAL
  
  \00FA
  
  SELECT ASCIISTR('é') UC FROM DUAL
  
  \00E9

  I know experts here will be reluctant to respond to questions about the TOAD, but I wanted to understand if I'm missing something. I checked the NLS_SESSION_PARAMETERS in SQLPLUS and TOAD, and they are the same. :-(does not understand this behavior
  
  Version of database Oracle Database * 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production *.
  
  Thanks in advance!

  The default code for the command line page is 437, identical to TOAD, you want to get the code page 1252

  SQL> host chcp
  Active code page: 437
  
  SQL> SELECT ASCIISTR('é') UC FROM DUAL;
  
  UC
  _____
  \201A
  
  SQL> host chcp 1252
  Active code page: 1252
  
  SQL> SELECT ASCIISTR('é') UC FROM DUAL;
  
  UC
  _____
  \00E9
  
  SQL>
  

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• I give the gift (Iphone6) I know not old identifier Apple.

  I give the gift (Iphone6) I know not old identifier Apple.

  If you mean that you have received the phone and it is locked to the previous owner's account, then you will need to contact that person and ask him to remove the phone from their account (no one else can remove the phone from their account, including Apple): disable find them my iPhone Activation Lock - Apple Support

• You must give the line of the menu on screen of the browser. The one with bookmark and leadership on this issue.

  Question

  I have another type of problem with Firefox

  Description

  You must give the line of the menu on header of the browser screen. One with bookmark file top

  This has happened

  Each time Firefox opened

  When I clicked on the wrong button

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Next-generation Java plug-in for the Mozilla browsers 1.6.0_16
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Adobe Acrobat plugin Version 7.00 for Netscape
  • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  See the first item.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)? Press and hold the button (Windows) (Linux and OSX see article below) and the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also