Audio does not pausing at the end of the slide

Similar Questions

• Captivate 8 - my audio does not play at the end of each slide after that I publish.

  It plays very well when I saw the individual slides, but after I publish some slides cut the end of the audio recording. I tried to remove and re audio recording.  Nothing solves this problem on some of the slides.   I am at my wits end and don't know what to do.  Please help, any suggestions?  Thank you.

  Leave a small space at the beginning and end of each slide so that Captivate

  see all audio clips as an audio clip of the major project.

• Captivate audio does not pausing in LMS after relaunch of bookmarking.

  My background is in Captivate 5.5.  I have audio attached to each slide and each slide contains a button 'Next' text to pause the slide at the end.  We use SumTotal LMS.  The course works very well if you start and complete it in one sitting. If I close and favorite of my place, then relaunch the course will begin where it left off and slides a break to the "next" button, but continues to go to the audio. "" I looked it up and down on both sides and that you can not solve this problem.  Several users have had this problem.  Any help would be appreciated I need to get this on-line course.

  Rod,

  Thank you very much!  I added the audio slide by slide and I at the beginning of each slide.  I will try to move a tenth or two out.

  I appreciate the help.

  Terry

  CID:[email protected]

  Terry Bradford

  Supervisor, Global Learning Center technology-based learning

  AGCO

  Tel. + 1 770: 232: 8095 Fax + 1 770.813.6140

  4570, green river Parkway, Suite 140

  Duluth, GA 30096-2563 USA

  [email protected]<>[email protected]>

  www.AGCOcorp.comhttp://www.agcocorp.com/> blog. AGCOcorp.comhttp://blog.agcocorp.com/>

  Facebook.com/AGCOcorphttp://www.facebook.com/AGCOcorp> twitter.com/AGCOcorphttp://www.twitter.com/AGCOcorp> youtube.com/AGCOcorphttp://www.youtube.com/AGCOcorp>

  CID:[email protected]

• Audio does not work in the new update of After Effects!

  Audio will not correctly render from After Effects - last updated 12.2 screwed audio on a 6 month old new mac w/shit Mavericks.

  You're screwing up Adobe!

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• HP Pavilion 17-f049nd: graphic equalizer Beats Audio does not work when the multistreaming is enabled. (Realtek audio)

  Hello

  While I was listening to music with my helmet on I decided that I wanted to add some bass with the control panel Audio Beats.
  But using the graphic equalizer sliders not cause the change in the output.

  So I've updated my driver to the latest version hoping that would solve the problem.

  The problem was fixed immediately after reinstalling, but I discovered that the multi-streaming has been disabled.

  As soon as I activated the multistreaming in Control Panel, I noticed the legalization was extinguished immediately.

  I like both options and want to use both.

  So I thought when the multistreaming is activated the graphic equalization no longer works.
  Is there a solution where I can use the multistreaming and still keep the graphic equalizer?

  I hope this is enough information, if needed I can provide more.

  Greetings Jeronetj3

  Hi @Jeronetj3 ,

  Thank you for your query.

  I regret to inform you that you can not enable both options.  You will need to choose one or the other function that is most important.

  The Beats audio panel doesn't have an option to control two different audio sources.

  Concerning

• MP4 music files does not work with the slide show in el Capitan/LR6?

  Since the upgrade to El Capitan on my Macbook Air LR6 refuses to add music files to iTunes for slideshow music library - starts the process, but does not end? Someone else out there there having this problem?

  Hi tedlemon,

  Suggest make you sure QuickTime player are updated.

  In addition, Lightroom should also be updated.

  See this link for update of Lightroom: keeping up-to-date for Lightroom

  Kind regards

  Claes

• Stop() does not work in the slide presentation

  I have a very simple stop() in my managers name and a blade that is under the master slide. No other code. The strangest thing is that the first stop() does not, however, the last stop() action works. I thought that it is something to with the Flash presentation type documents so I created a normal Flash document and of course the first frame stop() action works. I even created a fresh new Flash presentation document type and the same effect of the first action of image does not. No idea why this is happening to the presentation type documents?

  your last stop works well? try to put some images b4 the first stop... see if she jumps on it. ... he shouldn't do it... but it could due to the loading on presentation.

• Adobe MUSE. The logo does not specify when the slide show in full screen is superior to header...

  In Adobe Muse.

  When I put the 100% width homepage slideshow and bring it full page at the top of the page, the logo cover upward. Everything is, the tabs and outs flies, but the logo disappears. The only difference is that the logo is a GIF file. Anyone know what I'm doing wrong?

  The GIF is set to be the top-level object and is pinned to the upper left corner.

  Any help is appreciated.

  -Bobby

  Hello

  Please add a new layer (via the layers panel), move this new layer logo; and to ensure that this layer is above the rest.

  Hope that helps,

  Sonam

• Is it possible to set up the video so that it does not automatically change the slide master?

  Hello everyone. Is it possible to not have the video of Captivate automatically running but to manually edit slides, better with buttons? I could not find how do. This is because I would like to use interactions and if the video works as ususal, when the time of the slide is expired are therefore possible to click on the buttons of interactions and, on the contrary, if we want to ignore the slide before that time that is expired, they must click on the next button, and then the play button too complicated! So the best way would be to have an installer of the manula transition. Could you help me with this? Thank you very much. Maurizio

  No, it seems to me it's OK

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• Video and Audio does not move to the timeline.

  Hello.

  For these last days, I worked on a video in Adobe Premiere Pro CC. I got no problem with sounds moving in the timeline, so far...

  I can now move more video/audio files to my project on my calendar. The only way I can do this, is to make a new sequence, but that means, I don't see anything in the other sequence, it is simply a small hand closed and a crossed circle.

  No idea how to fix this? I posted a picture of my calendar down below.

  Thank you!

  

  I have a vague feeling that you have a point and an out point in your calendar that could interfere with your work, but I can't be sure. Try a right-click anywhere in the timescale of your timeline and choose 'Clear In and Out'. Then try to use mobile media in the Timeline. Please let me know if it works or not. Good luck!

• HP Envy 15 t-j100: Beats Audio does not work after the new update of Windows 10?

  My laptop set to automatically update itself with the new update of windows 10, and after checking my laptop I discovered that the bat sign was gone and uninstalled in my pc. The sound from my laptop has no depth and clarity. Is there a way I could find a driver that has the bat inside Control Panel? Thank you.

  The softpaq driver audio Intel IDT next will install the audio driver and the control panel of beats.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Books audio does not appear on the clip... but they appear on my computer

  I just got the video yesterday. I love.

  I dragged a bunch of music during 'My music' to the clip and all that everything went well.

  I dragged a few books,"I had more that were stored in the 'My music' in iTunes in my iTunes library

  folder... When I display video hard drive on my computer screen to see what is stored in the Audiobook box it shows

  the books are here... When I disconnect the Clip and go to the section audio books it is said 'empty '.

  Is there a way to get the books on the clip?    (I noticed that they are mp4 in my itunes and mp3 library in 'my music')

  Thanks in advance.

  Either way, I picked up this 4gig on slickdeals.NET for 34 dollars sent.  Bargains out there.  Greg

  jeba8888 wrote:

  Thank you again...

  You know of any software to do this conversion?

  iTunes will convert.

• Bat button fn - b Audio does not work after the installation of Win 8.1

  I read here about what is a problem.  I tried about 4 things without success, so I am posting this!

  I have beats HP Envy edition 14-2166se laptop which works entirely 8.1 update Win and using the audio driver sp63555.

  Everything works including the audio beats program just cannot move to the fn - combo button b or to disable the function controller audio beats. Any help would be great!

  Hello

  In this case, try the following.

  Open windows control panel, open programs and features, right click on the "HP System Event Utility" entry and choose uninstall.

  Once this done, reboot the laptop and let Windows load completely for a few minutes.

  Then, download and install the software version of HP Quick launch on the following link.

  http://h30642.www3.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  When the installation has finished, restart the computer again and let Windows load fully before checking the key combination fn + b.

  Kind regards

  DP - K