Audio Fadin incoming and outgoing, but the video quality remains high.

Similar Questions

• How can I do a slow motion video of 24 frames per second without making glitch and restless to research and without lowering the video quality?

  My 60 fps videos eventually lose and quality from 1080 to 720 p and occupy even worse I their scale. I want to know how to make a video 24 fps in slow motion without losing quality? Thank you!

  1. Twixtor
  2. Timewarp in AE.
  3. Framework for the pr mix.

  See you soon,.

  The f

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• What is the incoming and outgoing POP3 for AOL?

  What is the incoming and outgoing POP3 for aol?

  Hello

  the servers are:

  for POP3 - pop.aol.com

  for SMTP - smtp.aol.com

  But you need to change the port number in 587 for SMTP .

  You can see here - how to configure Outlook 2002 and Outlook 2003 for SMTP and POP3: click here

  (the last photo is important - you need to check - this server requires an encrypted connection SSL - SMTP and POP3 too)

  LC

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.

  QUESTION BY E-MAIL:

  FOLLOW-UP iMAC SETTINGS for ROGERS.

  THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)

  ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE

  OS X Yosemite 10.10.5

  Serial number. D2 * 8J7

  It is difficult to read.  Please use the top & bottom case.

  Please provide a link to the instructions.

  Please provide image on the screen to how you have configured these settings.

  -------------------------------

  How to show an image on the screen.  Avoid personal identification.

  on Mac, you do:

  Command + shift + 3 will have the entire screen.  You hear a click.

  Command-shift-4 lets you decide what to take.  Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire.  Press and hold the left key of the mouse to start the image.  Drag the mouse to lower left where you want to stop the image.  Mouse release.

  You will get a .png file to the desktop image.

  On the entrance sign of the forum, you will see the camera icon.

  

  Click on the camera icon.

  another window will appear.

  Make sure you have selected the in your the computer tab.

  Click the Browse button

  A Panel to open the file.  Select the file.

  After selecting a file, I have this screen showing.

  

  You need to click Insert Image.  You may need to scroll down to see the button to insert an Image.

  R

• Windows7 when I migrated to the Working Group at the field of the firewall has crashed. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  In my windows7 when I migrated to the task force to the area, crashed by the firewall. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  Hello arjunpottekkad,

  It is disheartening to know that have problems you with the firewall. As I understand it the incoming and outgoing traffic rules are missing from the firewall.

  The question you posted would be better suited in the TechNet Forums . I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you are having problems with the Windows Firewall or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  I have the same problem with. Recording with my camera JVC Everio MOD files.

  The problem is that. MOD files. All thumbnails of film appears correctly.

  I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

  Can anyone help?

  

• How to change my password and my incoming and outgoing mail servers

  Hello, I used Outlook Express for years and I know how to set up 'everything' I need in the pages of parameters because their settings pages are all "logical" with everything out in the open.

  However, Thunderbird "cache" their settings behind the buttons and confusing forms.

  There are many tutorials that explain how to set up Thunderbird since the beginning and show how to set up a new e-mail account. But I was not able to find a tutorial on how to change my password "after that" I have been using Thunderbird for a while.

  I'm also no way to change the incoming and outgoing servers. For example, I changed my hosting at another Web host and I need to use the new the new hosting company e-mail servers and I can not anywhere, see any tutorials that cover current activities or day by day with Thunderbird.

  Can you please change your screens of settings for Thunderbird easier for new people to find these normal and necessary?

  Also can you please point me to a tutorial that shows me how to change my password and change my incoming and outgoing servers?

  Thank you very much!

  Edward

  You can change your settings to

  • Thunderbird > tools > accounts settings
  • After clicking the account settings > you get a pop up window
    • Left hand side you can see the list of emails that you configured
    • Same left panel last option is the outgoing server settings

  Thunderbird is the customer between the user and the mail server. She never recorded your personal membership. If you want to change your password, go to your mail server and change it via browser

• Incoming and outgoing servers

  I try to send an email to apply for a job with my resume and were invited to fill out my incoming and outgoing servers who should I go to find this information responds (in lay mans terms please)

  [Moved from comments]

  You should contact your provider of messaging service for this information.  It is an electronic forum and communications in Windows, but it cannot dictate your information you need, as that depends on your provider.  If you go through Hotmail, then ask in the forum of Hotmail here: http://answers.microsoft.com/en-us/windowslive/forum/hotmail if not, see your email provider's website.  They usually have this information on it.  You will also need to specify which version of Windows you are using and how you access your emails in this version.  Without more information, it is unlikely that you will get more specific help.

  Steve

• Outlook express 6 rebounds all incoming and outgoing messages on Wndows xp.

  I posted this question earlier, but apparently to the wrong forum.  I deleted all the messages in my nbox, sent items, deleted projects... All incoming and outgoing messages are bounced back indicating that the bytes are at their limit.  I don't know if the messages are stored on my server or not.  Don't know how to check.

  Is there a solution for this?

  In addition to the other suggestions, try to go to the file. Identities and setup a new identity.  Add your e-mail account to this identity and see if it will download messages and delete what is on the server.  The files can be corrupted in the old identity and may not delete messages from the server.  You can also contact your provider and e-mail them to check on errors.

  Steve

• No sound on the asf files but the video is OK

  I save video files using my Aiptek NPVR CB video recorder + and when I read them from the card using Media Player and Windows 7, the video is good but there is no audio data.  I checked to see if the speakers are turned upwards and they are.  I use an HP laptop.

  I really don't want to convert the files.  Here's something else I noticed.  Windows Movie Maker plays the video with the audio very well.  It's only Media Player that seems to have the problem.

  =====================================
  No guarantee, but it might be interesting to try to download
  and install the following freeware codec pack:

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Win7codecs
  http://www.MajorGeeks.com/Win7codecs_d5959.html
  (the name of the file to download is: Win7codecs_v377.exe)

  Good luck...

• block incoming and outgoing calls for some phones

  Dear all

  I have some phones like the kitchen, to block incoming and outgoing calls to the phones of these kitchen and I want these phones to call only internally. I have E1 gateway H323. How the configuration it will be CSS and Partition?

  Thanks and greetings

  Ideally, you need to two CSSs for this - a CSS gateway and a device of CSS. Type the extension of the kitchen a new partition. Add this new partition to the CSS but not the CSS bridge. In this way the incoming calls are blocked.

  For outgoing calls, you will need to another partition and CSS. The partition must contain the model 9. ! (or whatever your outdoor access code) and should block it. It may be the translation or boss of the road according to the design of your CUCM numbering plan. This model will be assigned to a new CSS called Block_All (or something), and this must be attributed to the level of the line.

• my photos in charge for the cloud, but the video won't download

  my photos uploading to the cloud, but the videos are always in my phone and haven't gone anywhere, what I am doing wrong?

  You use photo stream or iCloud photo library.

  Photo stream sync videos.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET