Audio record control never renders on the screen

Similar Questions

• Two screen question: Control Panel appears on the screen 1 but the mouse is on the screen 2 and so I can't access

  I have a Sony Vaio laptop connected to a stand alone monitor. I don't use the laptop screen unless there is a problem and then I had to alternate between the two screens using Fn F7 key.

  A problem has occurred with the rundll32 process (which I'm trying to fix separately) and this led to the PC automatically flicking between screens and then stick with the independent monitor but in low resolution (so I couldn't access the tool bar along the bottom).

  I went to control panel to change the resolution to high, but the question of rundll32 kept close the process.

  This left me with icons on the desktop of the monitor stand alone, a white color on the laptop screen (it is normally black) and the ease of Fn F7 does not (said the service is not available).

  When I click on Control Panel on the screen of stand alone, it opens on the screen of the laptop, but I can't access it because the function of the mouse is on the screen to stand alone.

  Can someone help before I go out drinking?

  Thanks, Temp.

  I seem to have solved the problem. It seems that display order has been reversed and so I just had to move the mouse to the right of the screen to stand alone (I had been pushing against the left hand side) to move on the screen of the laptop. From there on, I played a bit with the display settings in the control panel and, although the issue of the always kept dllrun32 throw me out, seems to be back on the screen of stand-alone only, with the correct resolution and the Fn f7 works again. This means I can put the top back on bottle of vodka, at least until the next issue of dllrun32 arises.

• Receive error message when adding the control of signature on the screens of the Interview with the OPA

  Hi team,

  We have an obligation to add electronic signature on multiple screens of interview.

  I tried to add the control of Signature in the form of the interview, but I get the error message below. We use the OPA 12.2 version November cloud.

  "Current data mapping settings do not support file attachments. File upload controls is no longer valid. (OPA-E00538)

  Thank you

  Vivek

  Yes. And make sure that you submit to a Service Cloud FileAttachments active or item by using a connection to the web service that supports attachments for the entities mapped on a.

• Record: difference of Application and the screen area?

  Beginner questions:

  1. What is the difference between registration and Application screen area?

  2. with the selected Application, what is the difference between the Application and the area of Application window?

  Thank you.

  Hi winnn123,

  Check with application means you want to record actions on a PARTICULAR application. In addition, the recording rectangle could yield to the request to be registered. Three options are available:

  -Size: This means that the application window (to save on) will resize according to the selected dimension.

  -Window application: the recording rectangle will resize according to the dimension of the chosen application (to save on).

  -Area application: an application window is composed of many frameworks/component/regions. Select this option if you want to save a specific framework/component/area of the selected application.

  Screen area:

  This positions blindly the rectangle (of size selected) registration on the screen independently open applications.

  Hope that answers your questions...

  Manish

  http://blogs.Adobe.com/Captivate

• Why my document never disappears from the screen as I type?

  As I type, the document disappears from the screen until I have pass my mouse or use the touch pad so he could reappear.  It's still there - just not visible.  This happens several times as I type.  I removed the "enable transparency" for display in your office customization settings.  How to stop?  I have tried several things and nothing works.  This happens with Windows 7 and any laptop that I use.  I used laptops Acer and HP.

  Its aero effect, you can disable

  http://www.howtogeek.com/66549/stupid-geek-tricks-disable-Windows-7-Aero-peek-in-two-clicks/

  And

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Aero

• When I use background slide show that it never load and the screen is still black.

  thematic issues

  running windows 7 32 bit on IE9. When I customize my computer, it wont let me put a (RSS dynamitics) desktop background slideshow.  The slide show does not appear. the screen is always black.  When I stop, I get a fast one of the slide image until the computer shuts down. help please.

  Black screen after that Cruiser connection still works

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

• How to control a buddy of the screen when the screen sharing in Messages?

  I need help some parents with their Mac, but I have a problem with screen sharing. Why can I not control display a buddy in Messages? I don't have the possibility to enlarge a box on their screen. I use El Capitan on an iMac 27 ". I am trying to help people Yosemite on MacBook Pro.

  Messages (El Capitan): Share your screen

• Help, please! Problem with QuickTime audio recording of the iPod?

  Before you start: I one day 32 GB 6th gen (newest) iPod Touch and uses a MacBook Pro with OS X Yosemite 10.10.5 early 2015. QuickTime Player is Version 10.4 (833.7).

  I have an iOS game and you want to record a video of my game using QuickTime. I want to record is just two things: the screen of my iPod (to show the gameplay of course) and iPod audio (to listen to the music of the gameplay, sound effects, etc.). I play with headphones plugged into my iPod, so, naturally, I want to listen to the game and have the video recording, the audio of game as well.

  Unfortunately, a problem arises however. I insert my iPod in my computer, ready to start game and the headphones plugged into the iPod. I open QuickTime, then click on "file > new Movie Recording. From the drop-down list next to the button REC / I click on "camera > iPod of [my] Touch" and "micro >" of [my] iPod Touch '.» Immediately I can't hear my headphones... ! However the emulation screen iPod appears perfectly on my MacBook.

  If I press the record button when even just to see what happens. I recorded about 20 seconds of the game and click on stop. Pretty funny his returned to my headphones right when I stopped recording! Nevertheless, I plugged my iPod headphones on my MacBook and played the video I just recorded. The 20-second video has audio PERFECT, everything in the video went extremely smooth and no audio/visual of all issues.

  I wanted to keep trying, then instead of having already my headphones for my iPod, I tried to open QuickTime with my headphones unplugged; and then plugged my iPod after QT has been opened. The emulation screen FROZEN unlock and then when I unplugged the headphones. Unplug and plug in any again gave the same results. I waited a few minutes later headphones, then plugged back in. Surprisingly, I could finally hear audio and emulation of the screen has not frozen, but when I pressed on the record, the record got stuck on "0:00"- and when I pressed the stop button, it gave me an error message saying "unable to save" try save again. " I tried everything several times for a few hours and nothing has changed. Is there something I'm missing... ?

  (TL; DR) so I have to ask. Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Sorry for the long message and thank you very much for reading and any help!

  Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Your recording QT X settings say the iPod Touch to divert temporarily the iPod Touch audio pipeline (normally sent to the internal speaker/headphone port) to the Lightning-USB connector to connect to the application of QT X reader when recording. When the registration process is complete, the iPod Touch will automatically reconnect the audio pipeline diverted to the internal speaker/headphone port.

  

• No sound with audio volume on the screen box (won't go away)

  I have a computer from a1747c with a monitor of w19e with internal speakers under vista (updated)

  Suddenly the audio volume box appears centered on the screen and began to go to 0 and that's where he stays. And the internal speakers do not work. I tried to plug in headphones and external speakers, which both DO not work, but this audio volume box will not disappear on the screen. My thought is that the speakers are out?

  I also went in for speakers Device Manager which States that everything is working properly. I can live with the external speakers, but this box just won't go away... Any ideas? or is it a problem of repair shop...

  Thanks for any help!

  Liz

  Having satisfied this market since March or so I came to the conclusion that it is the buttons on the monitor itself! your work? one of them? THE MINE NOT - AT ALL, NONE OF THEM. The way I found to get rid of this box is to hold down the button ON / OFF on the monitor for about 20 seconds (until he died)

  I would like to know if that's what get you...

• Select the audio recording device

  I have inspiron 1501 (a new replacement), with 32-bit amd anthlon, windows vista OS.

  My micro phone volume was very low, the person on the voice chat could not hear it. I tried to make it work properly, by mistake, I disabled the device for registration of the properties. now I don't know how to re - activate again. It gives the message that no audio device is installed. I think by the upgrade of a link to forums to dell than the old problem will be over, but I do not know where to install the audio recording device. I tried the installation of equipment as well, but did not work.

  laasa.

  
  

• Now, the screen moves as the surface is larger than the actual size of the screen. I checked its display options, but how do I disable this screen oversized?

  Hello

  My mother was a member of the family to try to help inrease size but Bobo and now its screen in any program or simply from bottom of screen size is larger than the size of the screen.  She can move the mouse to the left to bring the extreme left veiw and then the same thing right but never have all the screen in veiw now.  How to restore to normal for her.  I tried control - display, but not... help her please help me

  Hi M Carmel,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with the resolution of the screen display.

  I suggest you to see the links and check.

  Change the resolution of your monitor

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• How to hang up after you left the screen of the phone

  Sometimes when I talk on my iPhone I leave the phone screen to access another application.  When I finished speaking, I can never return to the screen of the phone to hang up. Just go back to the phone application does not seem to do. Sounds like a stupid question, but someone can tell me how to proceed?

  Thank you

  PMC

  You tap the green bar at the top of the screen, where the status bar, then it takes back you to the call where you can hang up.

• Firefox starts on the computer, but will not be displayed on the screen

  Firefox is loaded on a dell Windows XP computer; It works fine one day. The next day I had cleaned up cookies and temporary files when I clicked on the icon, it acted like it was running, but would never appear on the screen. When I went to start it again it told me he was running, but I still don't see the program.
  I had to reboot the computer, but when I tried to start it again, it did exactly the same thing.
  I uninstalled and reinstalled but that has not solved the problem.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
  3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

  IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

  After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

  • (Windows 32-bit) C:\Program Files\Mozilla Firefox
  • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
  1. Go to the Windows Start menu and click on 'computer '.
  2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
  3. Find the folder "Program Files (x 86)" or "Program Files".
     • On 32-bit Windows, double-click the Program Files folder to open it.
     • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
  4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

  Now, go ahead and reinstall Firefox:

  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• How to have a batch file executed without the BACK popup on the screen?

  original title: running tape recorder in a minimized batch file or out of sight?

  Hi, I'm wanting to play a sound every 30 minutes.

  I wrote a batch file for use of Windows sound recorder to play the sound, and then close.  I will use the Task Scheduler to run and the calendar.  The sound seems to play fine, but every time it works I see a popup box BACK and then heard play recorder app.  These two things quickly disappear automatically, but ideally, I want the sound to play and can't see the window BACK or recorder popup of sounds on the screen.  Is there a way to minimize or hide these things automatically?  As it is run in the background, but still play the sound?  My batch file is below:

  Sndrec32.exe "C:\WINDOWS\Media\chimes.wav" /PLAY / CLOSE

  This could help you.
  http://zoombody.com/articles/run-a-batch-script-minimized