Select the audio recording device
I have inspiron 1501 (a new replacement), with 32-bit amd anthlon, windows vista OS.
My micro phone volume was very low, the person on the voice chat could not hear it. I tried to make it work properly, by mistake, I disabled the device for registration of the properties. now I don't know how to re - activate again. It gives the message that no audio device is installed. I think by the upgrade of a link to forums to dell than the old problem will be over, but I do not know where to install the audio recording device. I tried the installation of equipment as well, but did not work.
laasa.
Tags: Dell Laptop
Similar Questions
-
Microphone not recognized "an audio recording device is not found."
Original title: Microphone System
Hiya,
I am grateful to this avenue. Please, I'm using a Hp Pavilion g6, and the microphone does not work.
Only, I discovered the problem about a week ago, when I tried recording via "sound recorder". It opens not cos it says "an audio recording device is not found."
I tried upgrading audio drivers in Device Manager, but he says that they are up-to-date. When I right click on the speaker icon in the bar of tasks and open to recording devices, "no audio device is installed" is displayed under the disabled show the loggers tab. are active. The operating system is windows 8. Please, how can I solve this problem. Kindly guide me as if you are teaching how a toddler. Thank you
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
I would like to know;
- What is the status of the microphone in Device Manager?
- Are there updates pending?
The question can be caused either because of its pilot is missing, damaged, outdated or it could be a hardware problem.
Please try these methods below to diagnose the cause of the road.
Method 1: Run the troubleshooters.
I suggest to connect the microphone in the same port and try to run these convenience store to diagnose the problem.
Step 1: Run audio troubleshooter.
You might be able to solve certain problems by running a convenience store will automatically fix some common problems with audio.
Follow the steps to run the Troubleshooter:
- Press the keys Windows + C on your keyboard to show the charms bar.
- Troubleshooting type, and then click Troubleshooting under settings.
- Now select Search and solve problems.
- Select troubleshoot Audio playback.
- Follow the steps prompted to solve this problem.
Step 2: Use the hardware troubleshooter.
The convenience store is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.
- Connect the devices to the computer.
- Press Windows + W on the keyboard.
- Troubleshooting type in the "search" tab and press enter.
- Click on display all in the left panel.
- Click hardware and devices, new window will popup.
- Follow the instructions on the screen.
If the problem persists, follow method 2.
Method 2: Check the Microphone State.
Check the status of the Microphone in the Device Manager and the steps to see the Microphone in Device Manager are:
- Press the Windows key on the keyboard.
- Type run.
- In run window type devmgmt.msc.
- In the search for a Device Manager window for Microphone.
- Check if there is no exclamation point on them or not.
Method 3: Check the status of micro.
Make a right click on the speaker icon at the bottom right of the taskbar.
Check if the microphone is on it.
If not, configure it.
Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.
___________________
Thank you best regards &,.
Isha Soni
-
Win 7 Sound recorder-audio recording device is not found
New installation (new player) to Win 7 Premium 64-bit on Dell XPS 420 Quad Core Hiome. When I run the sound recorder, it gives an error this audio recording device is not found. Microphone is plugged into the front socket. It worked with Vista. I enabled see the disabled devices and devices disconnected sho. Any ideas? I also tried taking back mic. I scanned for hardware changes.
I did the things that you mentioned above:
1.) method 1: Windows 7 responded that he could not identify the problem
2.) method 2: check the show disabled devices and still no device appears. He says still no audio device installed under the recording tab.
3.) method 3: tried to update driver and reports of Win 7 I already have the most up to date driverAny ideas?
There is really no other solution that a better driver for the device.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
AppleScript: Select the audio files in the Finder, to create playlist
So, I have modified this Applescript courtesy of WoodenBrain and tried to deconstruct to use. What I need to do, is to be able to select the audio 3-4 files in the Finder, then contextually, select the function "Add to iTunes Playlist", that iTunes ask me for the name of the playlist, create playlist and add files. The script below which realizes, but has an additional step that allows you to select available playlists. I want to remove and don't have iTunes adds the music files to the newly created playlist.
I know that the solution is somewhere between the block of choice, but I can't seem to get the name of the created playlist and use the the_plvalue. Any ideas?
on run {parameters}
Try
Activate application "iTunes."
say application "iTunes."
define newFile to the text returned by (display dialog box default response "Playlist name?" » »)
make new user playlist with properties {name: newFile}
set the_playlists to the of each user playlist whose name friendly special is none and smart is false
the value the_playlists to iSort (the_playlists) to me
(* to remove the next block *)
say me to the value the_choice to choose from the list the_playlists with prompt "Add selection to this playlist:
If the_choice is false then error
the value the_pl to issue 1 of (every playlist whose name is the_choice)
(* end choice block *)
activate
the value reduced to window 1 to false
the value cn to (number of points in entrance)
Repeat with I have from 1 to cn
say application 'Finder '.
game of the_item to (point as aliasentry, I)
If I = 1 then set iname to the name of the_item
end say
Add the_item to the_pl
end Repeat
end say
end try
back entrance
end run
on iSort (_list)
_length set to length of _list
If _length > 1 then
Repeat with I have since 2 to _length
Set temp to the point I of _list
set j to i - 1
Repeat while (not (j = 0)) and (point of _list j > temp)
set agenda (j + 1) of _list to the point of _list j
set j to j - 1
end Repeat
set agenda (j + 1) of _list to temp
end Repeat
end if
return _list
end iSort
on is
Hello
Put the output of the command of playlist make new user in a variable.
No need of a loop, the add command takes a list of files.
-----------------
the term {parameters}
Try
Tell application "iTunes".
activate
the text returned by the value tNom (show the default dialog response 'The Playlist name?' » »)
the value of the_pl to the new playlist user with properties {name: tNom}
Add entry to the_pl
reveal the_pl - show the new playlist
tell the end
try to end
Back entrance
end of race
-
I am facing problem with playback of the audio recorded.
Original title: sound recording problem
Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.
It is uniform everytime I try. What I am doing wrong?
Rich
[Moved from comments]
Hello
What version of the Windows operating system is installed on your computer?
If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.
Automatically diagnose and fix problems of Windows audio recording:
http://support.Microsoft.com/mats/AudioRecording/
For more information, see the following link:
http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder
Hope the information is useful.
-
How to limit the audio recording time?
Hello
I want to limit the audio recording time 60 seconds. How can this be achieved? I've seen a single method but its to set the size. Or is it possible to get new coding time during recording? Please help me!
When you start recording start timer once it reaches 60secs... stop recording.
-
How do we install the audio output device?
How do we install the audio output device?
Usually, plug you speakers or a connector into the line-out or speaker of your sound card. You may need to update your audio drivers to get all the features of the software. What sound card do you use? Built in or add on the map?
-
analytical query to select the next record
Hi all
I would like to ask the two table below correspond to the output.
1.dev_wt 2.dev_map 3. output result
To help more clearance, please see this image link: http://lh6.ggpht.com/_xL6eBqjW6Yo/TEqnSvlF_FI/AAAAAAAAB0U/i2sclnnaj6g/Untitled-3.jpg
1 dev_wt
2 dev_mapPMS_COMP PMS_I PMS_PERF_D PMS_WT PMS_CREATION_D BBOARD GICEQGROSS 04/01/2001 30 04/05/2001 BBOARD GICST_B 04/01/2001 5 04/05/2001 BBOARD SBGS_B 04/01/2001 65 04/05/2001 BBOARD GICEQGROSS 04/11/2001 30 04/15/2001 BBOARD GICST_B 04/11/2001 5 04/15/2001 BBOARD SBGS_B 04/11/2001 65 04/15/2001
I would like to match PMS_I = GS_CODE to retrieve the GS_I_CODE and analytical assistanceGS_CODE GS_I_CODE GS_I_ID MD_ID GS_START_DT GS_END_DT GICEQGROSS CIWL 304 15 01/04/1998 31/03/2004 GICEQGROSS CIWL 304 2 01/04/2004 31/03/9998 GICST_B GICST_B 3707 15 01/04/2000 31/12/9998 SBGS_B SBGS_B 2231 15 01/04/1992 30/09/2003 SBGS_B SBGS_B 564 15 01/10/2003 31/12/9998
query to search for the next record.
Because I need to select record GICEQGROSS PMS_PERF_D date and following
GICEQGROSS save PMS_PERF_D of dev_wt table and put the result GS_WT_FR and GS_WT_TO output.
The date is in the format YYYYMMDD
PMS_WT is divided by 100
* 3. Output result *.
PMS_COMP is of dev_wt tableGS_I_ID PMS_COMP GS_I_CODE GS_WT_FR GS_WT_TO GS_I_CALC 304 BBOARD CIWL 20010401 20010410 0.3 3707 BBOARD GICST_B 20010401 20010410 0.05 5209 BBOARD SBGS_B 20010401 20010410 0.65
GS_I_CODE is dev_map join of tables with dev_wt
GS_WT_FR is dev_wt GS_START_DT table
GS_WT_TO's dev_wt record table according GS_START_DT where PMS_I = 'GICEQGROSS. '
Now my challenge is to select the next record in PMS_PERF_D using the query analysis. Below
is my query...
Thank youSELECT GS_I_ID, PMS_COMP, GS_I_CODE, GS_WT_FR, GS_WT_TO, GS_I_CALC FROM dev_wt ( SELECT lead(PMS_PERF_D) over(partition by PMS_I order by PMS_PERF_D) as GS_WT_TO FROM dev_wt where PMS_I ='GICEQGROSS') left join dev_map on PMS_I = GS_CODE ;
Edited by: WinZone 24 July 2010 16:46
Edited by: WinZone 24 July 2010 16:50Hello
This should be good:
SELECT DISTINCT t2.gs_i_id, pms_comp, t2.gs_i_code, TO_CHAR (MIN (pms_perf_d) OVER (PARTITION BY pms_comp, pms_i), 'yyyymmdd' ) gs_wt_fr, TO_CHAR (MAX (pms_perf_d) OVER (PARTITION BY pms_comp, pms_i) - 1, 'yyyymmdd' ) gs_wt_to, pms_wt / 100 gs_i_calc FROM dev_wt t1, dev_map t2 WHERE t2.gs_code = t1.pms_i
REM note even as odie: should be "2231" instead...
-
I get a message "an audio recording device is not found" when I opened the tape recorder.
When I go to sounds-> recording, microphone appears as "Not Plugged In". It wasn't so previously, and the problem comes after I reinstalled Vista on my DELL laptop. Kindly help... I'm not as able to use the microphone on Skype.
Hello
Welcome to the Microsoft Windows Vista newsgroups!Your sound card drivers are up to date?
Check your recording settings by clicking on the speaker icon in the system tray and selecting recording devices.
We can't wait to hear back on your part.
Kind regards
Savan - Microsoft technical support.
-
Can't find an audio recording device
help im trying to put in place skpye and relise my sister does not hear me and when I go to sound recorder I get this message? any help much appreciated
Hello, golfv
Please use the Forum for answers!
Your sound card drivers are up to date?
Check your recording settings by clicking on the speaker icon in the system tray and selecting recording devices.
We can't wait to hear back on your part.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Realtek 'Stereo Mix' lack of Audio recording devices
Realtek HD Audio "Stereo Mix" device is missing in the recording devices in the sound control panel applet.
Is there a secret register edition or something else to see this device option?
I enabled both these options tab check - neither worked.
"Show devices turn off.
"Show disconnected devices".
I installed the latest audio drivers from Realtek and Dell. No 'Stereo Mix' presentation.Anyone, please help.
---------------------------------------
Model of laptop - XPS L501X
Realtek High Definition Audio (on motherboard)
Genuine Windows 7 Home Premium, 64 bit, (w / SP 1)---------------------------------------
Last installed Dell driverAudio Realtek ALC665, v.6.0.1.6312, A04
(Pilot)
07/04/2011
6.0.1.6312, A04
Previous versions
Description
Realtek ALC665 Audio driverTelexerHere's an entry forum from a guy who said it fixed "Missing Stereo Mix" on a Sony machine by editing the registry. It has IDT audio driversIDT has of a registration for "Rec.Playback" option, which is the same as the stereo mix, so no need of a tool for editing on these models.
Yours is the first post I've seen that reported no stereo on a Realtek driver mix when turned off and disconnected show are checked.
In regard to older drivers you don't have much to choose from on the Dell site. I worry not so much about to try. If you don't like them just re - install the current. (Before installing an old one first remove the current in the control panel > view by category > uninstall a program.)
About the rumor about Dell, I would say that it is more likely a decision made by Realtek if even the direct driver from his site doesn't have stereo mix.
-
I connect on - the work of sound system very well. Media player works fine. The next time I log on - no sound system. Everything is plugged, convenience store finds no problems, Media player goes through all the steps and looks that don't worry, still no sound. I have download a fix for the VIA recommended by Dell Driver. I did, and it still has the same problem. I can close, reconnect, and then the sound will work. Sometimes I have to close and log on twice in a row so he can launch.
Can someone point me in the right direction to solve this problem? I am working on a Dell Inspiron 546 AMD Athlon II x 2 215 2.70 GHz and 64-bit with 400 GB of RAM. I installed Windows 7 but when I dug deeper into the service code for this machine which found at some point in time he had installed Vista. This could be the same Vista to Windows 7 problem audio, everyone seems to have? I bought this Staples announced new with Windows 7 as operating system.
I did research on all forums and responses and am unable to check if I have a "sound card". I'm not used with the terminology so even if I follow the Microsoft instructions to find the right place to check and see, I do not understand what I see when I'm there. It is said: ATI high definition Audio Device and VIA High Definition Audio. Is this to say that I have a sound card or I should get it a? If I buy a sound card will it fix my audio problem?
Even though I had my audio problem fixed, I was disappointed by the sound quality of the speakers on this new system up to date. My speakers on my old computer (which lasted from Windows 98) were by far superior in sound quality. I don't understand why they sound so crappy and barely louder, and when you show the to they have a rattle for them. I tried plugging my old speakers on my new computer, but nothing happens. My new speakers have a Plug and a USB port. I don't know what is... why goal can not use my 'old'?
Finally, I want to record my vinyl on discs and need a great sound system. Any advice?
I removed all the ATI Audio as suggested. The result in the short term is that the audio quality is improved. I no longer hear the "crackling" when the sound is turned on. I'll answer more if the issue of audio (works) continues to be a problem because the fix. If you don't hear from me, then please consider the problem solved and my thanks to you.
-
How to select the audio language in the Quicktime format.
as title, I have couple of the film which have an audio language 2 when I play on Quicktime it mix together 2 audio.
can I know how can I do to select the main audio language?
Hi nothing Jack,.
I understand that you are not able to choose which audio track plays for your Quicktime movies. I know it's important to understand the language in your videos, so I'm happy to provide some clarification for this.
When you watch a video in Quicktime format, use the menu bar to select view > languages. From here, you can choose which you do not want to use the audio track.
Thank you for using communities of Apple Support, cheers!
-
I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.
Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.
Reproduce:
1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
2. change your audio output device by default
3. audio will continue to play the original output deviceThank you!
Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079
-
Windows Dvd maker has left the audio recording
Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?
Hello
Windows DVD maker has all the features as other programs. I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.
I use Roxio 2012 Pro to my video, burn them to DVD.
Maybe you are looking for
-
my ID apple does not work on my app store? on my mac pro book
I have frequently changed my apple ID, but still can not the apple password to work on my app store?
-
Equium L40-156: graphics card problem - error code 12 in Device Manager
People of the night... Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965). Tried the drivers that I had with the installerTried the drivers from the toshib
-
HP Envy 5640: Tray from the Photo printer
When you try to print a photo using the printer tray photo fails to print and displays the message "on paper" despite the fact that there is paper in the tray. Problem just occurred despite the printer works already satisfactory. Satisfactory œuvres
-
I have a hp g71-449wm leave the hard drive I have replaced the hard drive fresh reader not instal Windows 7 Home premium loads all drivers HP for this computer all is treachery but not tried reinstaling drivers for audio sound still no sound in the v
-
Venue 11 5130 Pro 32-bit to 64-bit
Hello Is it possible to upgrade the Dell coming Pro 11 (5130 32 Bit version) to the 64-bit version by installing the 64-bit version of bios? And is it possible to update the partition to boot/restore to 8.1 64-bit Windows? Initially, the 32-bit versi