Audition 2.0 current Batch Script interrupted, do not save completed

Similar Questions

• Automated batch PS Action do not save files

  Hello

  With the help of JJ Mack, I developed a very successful PS Action that converted the white funds in safe and transparent .png files.  He was very helpful and the action ran with great success the first time.  I ran a few others actions and lots to do other things, and when I returned to perform batch action once again, it will work but will not save files!  It seems to go through the steps, but does not record.  When I go through the SAME steps manually, it works perfectly.

  The action runs Javascript of JJ, which modifies the lower layer, selects the image white background items and then removes them, and saves the file.

  Can someone figure out why this action stopped saving files?

  I don't trust my parameters of the batch because I had to change these to perform other actions, and I noticed the "compatibility: Windows" is grayed out and I don't know why.  I tried a few different options in the PLC > parameters of treatment by lots, but nothing seems to help save the files.  Here are the current settings of the batch:

  

  And here is a screenshot of the actions (which remember, worked perfectly before.)

  

  Anyone know why it will not save the converted files?

  Thank you!

  Remove the last two steps in this action.  Download and install the plugin Image Processor Pro script.  Then use Photoshop menu File > Automate > Image Processor Pro... the action to remove the background and thus the size of the script and save all the files you want png.

  

• Change the LV version currently active in the batch script

  Hello

  I use two different applications on my computer, and one of them should run in LV 2011, this in LV 2012. The two versions are installed and it works fine until I start the correct version of LV manually before you start the application (start and end of the required version of LV in C:\Program Files (x 86) \National Instruments\... before starting my request).

  I want to do this automatically in a command script, so basically I want to do the following:

  * Check which version of LV is currently active (last LV start version)

  * If the currently active version of LV is NOT required: change to the required version of LV (by starting LV and close or preferably do differently if someone could tell me how)

  * If the currently active version of LV is required: do nothing

  There are two problems I couldn't solve so far:

  * How to get the LV version currently active (I checked the windows registry, but I see that my installed versions of LV, and not one that is currently active)

  * How can I close LV with a batch script (or how to change the version of the currently active LV without opening and closing)

  Thanks in advance,

  Tobias

  PS: I did the same for the different versions of TestStand, by reading the TestStand system and if requuired environment variable change the version of TestStand via the command-line of the TS Version selector. It works fine, but there is no system environment variable that indicates the currently active version of LV.

  OK, this is a very informal Tip:

  In the registry (regedit), you will find the key 'HKEY_CLASSES_ROOT\LabVIEW.Application\CLSID '. This default key should contain some weird ID information.

  If you search for this key, you will find an entry for the key in the "HKEY_CLASSES_ROOT CLSID" section.

  If you have several versions of installed LV, there must be a key in the entry which will give you the path to the active version of NV. don't forget: this is the version that you have opened up to the last successfully!

  Please note that keys can change from system to System. Also different versions of LV can use different keys like "routing information" the way of the real LabVIEW.exe.

  hope this helps,

  Norbert

• How to report the ip address resolved of nslookup as a variable in the batch script

  I have a batch script that performs a constant audit 'external server' living every minute and the activity is fed into a log file. The external server is on a dynamic ip address.

  for example,.

  Logfile = C:\Logfile.txt

  echo control myserver... > Logfile

  .

  .

  [see document test/myserver.domain.com]

  However, I would like to write in the log IP address that is being tested.

  That is to say

  the my_server checking to 123.456.78.9 echo

  Could someone tell how can I get the dns to resolve address from "myserver.domain.com' as a variable in order, can I use it

  for example,.

  RESOLVED_ADDRESS = (nslookup resolution results)

  the my_server % RESOLVED_ADDRESS % control echo

  Thank you

  Hi Jimimaseye,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• delete the printer driver by political group or batch script

  I am migrating our server F & P from 2003 to 2008.  I created all of the printers in server 2008 and tested, and they print correctly.  Test the issue I am running is this: I can add the printer Server 2008 for fine local workstation, but users are unable to print the new queue.  If I go ahead and deleted the printer and remove the driver completely and then add the printer on 2008 server works very well.  So, I'm looking for a way to remove printers and drivers of each workstation via Group Policy or batch scripts to make my life easier.  Thank you.

  Hello

  Given that the problem is related to the windows server, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• How to compress files after backup is finished in batch script

  Original title: files compressed
  How to compress files after backup is finished in batch script

  Hello

  Thank you for visiting the Microsoft answers community site. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows 7 Scripting forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

  I hope this helps.

• Writing batch scripts

  Text editor is the best to use on the command line to write a batch script? Are there special orders for a batch file?

  You can simply use Notepad. It works very well and once you have written your script, just save the file with a .bat extension.

• How to hide the user id and password in the batch scripts

  Hello

  Can help me hide the user id and the password in the batch scripts to automate the process of running script to export and action.

  Context: In my client project does not display user id and password that's why they are looking for guaranteed way to hide them.

  Thanks for your response in advance.

  Kind regards

  Sandra.

  Sandra,

  As stated by Craig Administrator's Guide is a good option.

  Let me give you a few steps I did in one of my projects.

  Open the command prompt and navigate to the location "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client"... here you can see many see as well other utilities.

  DRM-batch-customer - credentials.exe is the one that is used to encrypt the user name and password.

  Open this in the command prompt and choose the application that you want to encrypt the password.

  then remove the username and password from command script can run it... It does what you want

• Import a csv file to workspace root folder using Batch script

  Hello

  I usually use LCM to export/import from one instance to another in my planning and HSS and Reporting objects.

  Here, I have a specific requirement where I want to import couple of CSV file from a path on the server specified in the root directory of the workspace that is accessible to users similar to other FR and IR reports.

  I was looking for a utility to import or batch scripts I use to import the file to specific path from the server to the folder root of the workspace. \

  any help?

  -KP

  Checkbox Oracle - Hyperion Labs...: upload files in bulk of permissions in the workspace he wrote for the pdf files, but you can change it

  Concerning

  Celvin

• Rename a batch script and link images?

  Hello, everyone!

  First of all, I did search for this before asking and found many similar scripts for this, but as I don't know how to make or edit scripts, I could not use them...

  I work in a company that produces school books. Each InDesign file that we can have hundreds of images of various extensions (.eps, .ai, .psd, .tif).

  We must now rename these images to a naming system defect that we defined. It takes hours or even days to do it manually.

  These images have currently changed names, so we would need to ignore what is there, just need us a prefix configurable (as "EF6_ESP_C1_"), then a number starting at 0001 4-digit and the rest of the numbering (if there are say a .tif and then a .ai, it should be 0001.tif and 0002.ai), then the extension that she already had.

  Preferably, but not not mandatory, if one could read that the image already had a "EQ" in the name of the file, he could rename them to another prefix and counting those separately from 0001, while we work equation images separately, but if this is impossible or is too difficult to do, so just have named and numbered with others.
  -What someone would be kind enough to help me with this? Thank you very much!

  Try this,

  var doc = app.activeDocument,
      links = doc.allGraphics, count = 1, eqcount = 1, a = "0000";
  for(var i=links.length-1;i>=0;i--)
  {
          if(links[i].itemLink.name.match(/^EQ.+/))
          {
                  var ext = links[i].itemLink.name.substr(links[i].itemLink.name.lastIndexOf(".")),
                      old = File(links[i].itemLink.filePath),
                      eqnum = (eqcount++).toString(),
                      newname = "EQ_EF6_ESP_C1_" + a.substring(0, a.length - eqnum.length) + eqnum + ext;
                  old.rename(newname);
                  links[i].itemLink.relink(File(old.toString().replace(links[i].itemLink.name,newname)))
              }
          else
          {
                  var ext = links[i].itemLink.name.substr(links[i].itemLink.name.lastIndexOf(".")),
                      old = File(links[i].itemLink.filePath),
                      num = (count++).toString(),
                      newname = "EF6_ESP_C1_" + a.substring(0, a.length - num.length) + num + ext
                  old.rename(newname);
                  links[i].itemLink.relink(File(old.toString().replace(links[i].itemLink.name,newname)))
              }
      }
  

  Please note: it is not reversible.

  Kind regards

  Cognet

• Write a batch script to import data in a database of DRM *.

  Hello
  
  I'm having a problem writing a batch script
  to import into DRM from an external database.
  This is the script I wrote:
  
  [General]
  Username = myusername
  Password = mypassword
  URL = net .tcp://usphl0mdma1: 5210, Oracle, Drm, ProcessManager
  Operation = import
  
  [Import]
  Operation = import
  InFile = TEST
  ImportLogFileName = "Importlog.log"
  AutoSave = Yes
  
  
  Can someone please tell me if I'm doing something wrong, and the best course of action will be highly appreciated.
  Note: it is on DRM 11.1.2.3
  
  Published by: 1010031 on June 5, 2013 09:43

  First, are you able to import from a DB table manually?, if it does not.

  Then I think the issue is around "InFile = TEST", I do not quite see documentation around batch import of a DB Table.

  Murali-

• Using single quotes with MaxL in batch scripts

  I have the following MaxL, I need to pass to essmsh via a batch script:
  
  run the calculation ' FIX("Member 1") CLEARDATA "member 2"; ENDFIX' on App.Db;
  
  The problem is that the single quotes cause problems when it is passed as a variable in the batch script. However, if I change single quotes to double quotes the batch script is happy but the MaxL is not valid.
  
  Please can anyone suggest how I can get this to work?

  You also try that works

  ( @echo login %USER% identified by %PASS% on %SERVER%; & @echo execute calculation "'FIX(\"Member 1\") CLEARDATA \"Member 2\"; ENDFIX'" on App.Db; & @echo logout; & @echo exit; ) | essmsh
  

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to make a batch script?

  Can someone help me do the following script to add serial numbers apply to several files in a selected folder?

  I'm pretty new to this.

  var app.activeDocument = docRef;

  with (docRef) {}
  docName var = name.substring (0, name.lastIndexOf('.'));
  var artRight = visibleBounds [2];
  var textLeft = artRight + 9; 5 plus 4 for text to guess?
  Var Middle = visibleBounds [3];
  var textRef = textFrames.pointText ([textLeft, Middle]);
  textRef.contents = docName;
  textRef.textRange.characterAttributes.size = 4;
  textRef.textRange.characterAttributes.textFont = app.textFonts.getByName ('ArialMT');
  textRef.rotate (90, true, true, true, true, Transformation.LEFT);
  }

  Thank you!

  I managed to remove changing a batch script of PDF from Adobe! THANK YOU two because without your help I couldn't have figured this out!

  Here's the code if anyone is interested.

  =============================================================

  Main code [the script starts here]

  Uncomment to delete the Illustrator warning dialog boxes
  app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;

  var destFolder sourceFolder, files, type sourceDoc file, targetFile, pdfSaveOpts;

  Select the source folder.
  sourceFolder = Folder.selectDialog ("choose the folder with Illustrator .ai files you want to convert to PDF ');

  If a valid file is selected
  If (sourceFolder! = null)
  {
  files = new Array();
  fileType = "* .ai; Guest ("select the type of Illustrator files you want to process.") For example: * .ai ',' ');

  Download all the files that match the pattern
  files = sourceFolder.getFiles (file type);

  If (files.length > 0)
  {
  Get the destination to save files
  destFolder = Folder.selectDialog ('Select the folder where you want to save the converted PDF files.', ' ~');
  destFolder = sourceFolder;
  for (i = 0; i< files.length;="" i++="">
  {
  sourceDoc = app.open (files [i]); Returns the document object

  var docRef = sourceDoc;

  with (docRef) {}
  docName var = name.substring (0, name.lastIndexOf('.'));
  var artRight = visibleBounds [2];
  var textLeft = artRight + 9; 5 plus 4 for text to guess?
  Var Middle = visibleBounds [3];
  var textRef = textFrames.pointText ([textLeft, Middle]);
  textRef.contents = docName;
  textRef.textRange.characterAttributes.size = 4;
  textRef.textRange.characterAttributes.textFont = app.textFonts.getByName ('ArialMT');
  textRef.rotate (90, true, true, true, true, Transformation.LEFT);

  sourceDoc.save ();
  sourceDoc.close ();
  }

  }
  }
  on the other
  {
  Alert ("no file found");
  }
  }

• Is there a a way to "Consolidate all" using the FDM parallel batch Script?

  Hello
  
  When you run the BatchStdParallel script in FDM, the lngProcessLevel will take place in the consolidation, but it's only "consolidate" in HFM. I would like to know if there is a way instead "consolidate all With Data. Does anyone know if there is a way to do this?
  
  Here is the part of the script. Any help would be greatly appreciated,
  
  Dim BATCHENG
  Set BATCHENG = CreateObject ("upsWBatchLoaderDM.clsBatchLoader")
  BATCHENG.mInitialize API, SCRIPTENG
  
  ' Initialize variables Variables
  lngProcessLevel = 10 ' top consolidate
  strDelimiter = "_" ' delimiter in file name
  blnAutoMapCorrect = True ' automatic Correction of the card is on
  lngParallelProcessCount = 2 ' the number of parallel processes (must equal the number of processors)
  strLoadBalanceServerName = "MCK120" "server load for a parallel balance

  Check your settings for integration. The strengthening method is not specified by the batch script.

• How to delete a DATA FILE and rename the other DATA of FILE Batch scripts

  DELETE or DROP d:\NDM\Data\StampFiles\STAMPLOADBKUP.csv
  
  RANAME d:\NDM\Data\StampFiles\STAMPLOAD_cwoo.csv data file for d:\NDM\Data\StampFiles\STAMPLOADBKUP. CSV
  
  what works for use in support of scripting batch above and need exact syntax please. I am poor in the batch script.
  
  Concerning
  Soma

  ================
  D:

  CD d:\NDM\Data\StampFiles

  del STAMPLOADBKUP.csv

  Ren STAMPLOAD_cwoo.csv STAMPLOADBKUP. CSV

  ================

  That should do it for you!