HP 410 t

Similar Questions

• HP Slimline 410-010: slimline 410-010 Win 7 drivers

  My grandparents bought a new Slimline machine 410-010, which came with pre-installed Windows 10. They fear and were willing to buy a new machine outright just to go back to Windows 7. I bought a code and already had a disc, so I loaded Windows 7 on the machine. It was an OEM Win 10 machine so without decommissioning was not an option. After completing the installation, I got the yellow exclamation points on the following drivers in Device Manager:

  • Ethernet controller
  • Network controller
  • PCI Simple Communications controller
  • SM Bus controller
  • USB Bus controllers

  I checked the HP website for drivers but was unable to find an any of them for Windows 7. Someone here could point me in the right direction?

  TIA

  Hello:

  See if these drivers work because I can not find all related HP models that have drivers W7 (other than 2 or 3 see you listed).

  SMBus: Install this driver first and then restart.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?v=t

  Ethernet: 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  USB: Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?v=t

  Wireless (network controller): I need to view the ID of the hardware for this device, so I know what model wireless card it is.

  To find the hardware ID, go to the Device Manager and click on the network controller.

  Then click on the Details tab in the upper part of the window network controller.

  Now you should see a drop-down list of property and it will be set to the Description of the unit.

  On this list and select the item at the 2nd (hardware ID).

  After the first string of characters you see in the window.

  Simple controller PCI of Communications: give this one a try...

  FTP://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65854.exe

• HP 50g and StreamSmart 410 Data Logger

  No one knows for sure if the 410 StreamSmart data logger works with the HP 50 G. All the places I've read says that it works with HP 40 gs/gs 39. However, the guys of Educalc (http://www.educalc.net/1518486.page) says that it works with HP 50 g but I was not able to confirm. Anyone who has ever tried? If this does not work with HP 50 G, a data recorder that works with it?

  Thank you

  I don't think that the ROM with the support of the 50g never goes out publicly. However, they could have gotten ahold of it from somewhere, and that's why they say that it is supported. He is there not much of interest using the 50g to connect it upward and therefore only Roma to 39/40 were fully tested and released.

  The internal hardware between the ss400 and ss410 is totally different. Unfortunately, there wasn't enough space for two support units 1 rom version...

• Satellite Pro 410 CDT fan failure

  I tried to get inside my old 410 CDT change the fan, without success! I unscrewed everything I can find, removed the keyboard and bits, hard drive, memory card, battery. All edges appear to raise, but something set in the middle. Advice please?

  Hi GrahamB,

  Sorry, that normally Toshiba does not provide any disassembly manuals! You can find some tips for disassembly in these forum, but not for these old machines!

  Either you try it yourself or contact a Service partner and ask for a tip to remove the card!

  When you try it for your own please be careful because a damaged pension costs more than a brief phone call!

  Good bye
  Tanya

• Re: Satellite A100-410 cannot start Windows XP

  Hello

  I have a Satellite A100-410 and I can't start over (in safe mode ok). When starting, it shows the XP screen and after 10 seconds, the screen goes black. We have re-installed XP but no use. We checked again and assume that something is wrong with the video card drivers.

  So we checked for the last but no use. I can boot the laptop when the video card is uninstalled, so it takes to cause something weird.
  Or could it be that the card is broken?

  Hello.

  For sure your video card is ok, otherwise you may see white screen after switching on. The problem is in the driver problem. Have you downloaded the Toshiba site display driver?
  Maybe there is a conflict of driver. This site http://downloads.guru3d.com/downloadget.php?id=1655&file=7&evp=c14f9f3787877ee f9ef4b235b9146e96 stage
  Download and install. Then try to reinstall the display driver (if not work, do it in safe mode).

  If she's not always you help, do a search for a new iso Windows Xp but not Windows assembly (some guys like to change windows, deleting and adding some files, and then load it. Most of these modified versions are bad).

  That's all I can suggest now, sorry if does not work.

  Welcome them

• 410 - 017cb: 410-017cb drivers

  My office recently bought a 410-017cb, and I can't seem to find the drivers for it. We have downgraded 10 of Windows to Windows 7 Pro, so we could use it on our field.

  Hello:

  It does not resemble HP supports this model for W7.  There is only a file audio and BIOS.

  See if these drivers work...

  Chipset: 2nd one on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

  USB3: Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?product=65855

  Ethernet: 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Wireless:

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp72932.exe

  Once you're connected to the internet, run windows update tool and see what other drivers are it.

• Update server not responding not photosmart no 410 all-in-one

  Hi all

  I'm new to the blogging and not too computer savvy, so patience please. This problem looks like it's been posted before, but I do not know how to apply it for me.  I have a 410 a printer connected to a minimac running OS x 10.10 (yosemite?). I'm updating the software in order to avoid printing duplicates after turning off the computer. When I go through the procedure to start the update of the printer screen says that it had a problem connecting to the server.

  I tried the IP address of the printer in Safari and Firefox, but as many say server is unresponsive. The server is down, or there's a problem with my setup?

  Help - and thanks

  Hello danny-1,.

  Thank you for visiting the Forums from the HP Support! I see that you are trying to update the printer drivers for your HP Photosmart C410 but you are facing some errors, saying: the server is not responding. I would like you to follow the steps below:

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click on Printers and Fax/Scan. The Print & Fax/Scan dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The printers and Faxes dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now you can download and install the printer software and install it. Click on the link below and follow the instructions on the screen:

  Installation of the OS X v10.10 HP Yosemite of Apple Software Update print driver

  I hope this helps, please let me know the result!

  Thank you

• Do I have reason to infer that I can't get two monitors running on my HP Pavilion Elite HPE - 410 t?

  I got the Pavilion Elite HPE - 410 t with the included nVidia GeForce 315 graphics card and tried to get two monitors put in place. I have two VGA screens and I run one of them off the coast of DVI using a VGA port to DVI, and it works fine. However, I can not all signals from the built-in VGA port, so I started to look around the site of HP. I came across a page that lists the motherboard Plug and he shouted that the embedded video is not available if a graphics card is installed.

  Thus, it seems that I am out of luck, but I just wanted to see if anyone could tell me if it is maybe something obvious that I'm missing. My nVidia monitors also has an HDMI port, but I understand that I would need a HDMI monitor to be able to use this port.

  Can someone let me know if I'm wrong in my understanding of my options, or if there is an easy solution?

  Thank you.

  Hello

  Yes, you are right to assume that if you have a video card installed, the integrated graphics chip is disabled.  Looking at the specifications of your card (see link below), he suggests that it has a VGA, DVI and HDMI connection.  However, I realize that these specifications vary and may not apply to the card that you have.

  NVIDIA GeForce 315

  If yours doesn't have the VGA adapter, then your also had reason to assume need you a monitor with an entry in order to use 2 monitors HDMI.

  Kind regards

  DP - K

• Satellite A100-410 - no image on the internal display

  Dear readers, (also strange that Toshiba sells also in the Netherlands, and I do not use the Dutch language)

  I have a Toshiba Satellite A100-410
  I have problems after one year only (after warranty) where to plug an external monitor.
  The laptop displays not its own screen, without external screen is lighter, it starts but no picture.
  I did it with Fn + F5 but nothing

  Controlled parameters but no error detected.
  It would be nice if someone could send an email with a url so that the old setting back.
  It's a Windows XP MCE and the mechanic that all abducted and put Vista on.

  At the beginning, a lot of problems, but it was under warranty and after that install on a clean disk Vista had no problem just no image on the notebook and which isn't difficult if you use him in the hospital.

  So I hope that someone can send an email with a solution.

  Thank you
  Seggelinck

  (> also strange that Toshiba sells also in the Netherlands, and I do not use the Dutch language)

  Toshiba selling own products around the world... everyone here validate in the own language? Definitely bad idea...

  However, your question;
  Just to clarify your question; the internal screen does not work, but you can all see if you connect to the laptop to the external monitor. Is this good?

  Well, I doubt that this could be a software issue... maybe the internal screen is defective.
  What do you thing about this idea?

  Usually, you should see the start screen for Toshiba at the beginning of the startup procedure. If this screen is not visible on the screen of the laptop computers, so I guess that this problem could be linked to the failure of the display.

• Compilation failed due to an error of Xilinx (410)

  Hi guys,.

  I am compiling my FPGA with the Service Cloud to compile code. I have a FPGA code that compiles without any problem. When I put a knot of FIFO of DMA in this code, I get the error on the Xilinx compiler at the following address:

  ERROR: HDLCompiler:410 - "/ opt/apps/NIFPGA/jobs/CSD2awO_GQdD63p/NiFpgaAG_0000050c_CaseStructureFrame_0001.vhd" line 211: Expression has 66 items; 50 EXPECTED
  Netlist NiFpgaAG_0000050c_CaseStructureFrame_0001 (vhdl_labview) remains a black box, due to errors in its content

  The code compiles fine without the node of DMA. The DMA is a target to host DMA, 1023 long element (block of memory), the type of the elements is U32.

  There is something else on the block schema as well. When I copy the SCTL in a new VI without anything in it, it compiles without problems, without worrying if the node of DMA is here.

  Please find the extract VI and the attached summary of errors.

  All ideas are welcome.

  See you soon,.

  Norbert

  If the problem seems to be resolved...

  I deleted the DMA FIFO of the block diagram node and he still added. After about 40 minutes, I had a successful compilation. Weird.

• SL 410 Upgrade ram and hard drive

  Hi all

  I have been using the 410-2842-rk1 model Lenovo thinkpad SL for a year and a half.

  No problems until now

  I want to upgrade the RAM and hard drive of this machine.

  At the time of purchase, I had seen that I could improve up to 1 TB of hard drive.

  Please guide me if I can or not.

  About the RAm too, I need assistance (maximum limit I can update)

  Thanks in advance...

  You can switch to a 1 TB HDD providing it will fit physically. They are more hard are 9.5 mm thick but some hard drives of 1 TB are 12.5 mm thick. If you get a 9.5 mm HARD drive then it will work. Readers of 12.5 mm is too thick to fit.

  Regarding the RAM, you can install up to 8 GB of RAM, which is 2 x 4 GB.

• Error - 410 after scan

  I'm programming a Keithley SourceMeter 2430 to run a scan. Using a similar code to scan no I've never had a problem. I run a scan on the GPIB-USB-HS. First time works fine, but when I try to get a second series of readings, I get the error of request interrupted-410. If I restart my software can I get again a series of measures before the error. I fought with this for a few days and I need help.

  Here is my code.

  Thank you

  Richard Hutchings

   ControlObjects.Keithley2430.Write("*RST")
          ControlObjects.Keithley2430.Write(":SOUR:CLE:AUTO ON")
          ControlObjects.Keithley2430.Write(":SENS:FUNC:CONC OFF")
          ControlObjects.Keithley2430.Write(":SOUR:FUNC CURR")
          ControlObjects.Keithley2430.Write(":SENS:FUNC ""VOLT:DC""")
          ControlObjects.Keithley2430.Write(prot)
          ControlObjects.Keithley2430.Write(startSweep)
          ControlObjects.Keithley2430.Write(stopSweep)
          ControlObjects.Keithley2430.Write(stepSweep)
          ControlObjects.Keithley2430.Write(":SOUR:CURR:MODE SWE")
          ControlObjects.Keithley2430.Write(":SOUR:SWE:RANG AUTO")
          ControlObjects.Keithley2430.Write(":SOUR:SWE:SPAC LIN")
          ControlObjects.Keithley2430.Write(trigCount)
          ControlObjects.Keithley2430.Write(":SOUR:DEL 0.1")
          ControlObjects.Keithley2430.Write(":READ?")
          Sleep(10000)
          readString = InsertCommonEscapeSequences(ControlObjects.Keithley2430.ReadString())
          VI = Split(readString, ",")
  

  The two problems are solved now. I found that if I put any of any delay, readstring somehow made a statement break the vb code until the scan is done.

• 410 a Photosmart premium: the HP Solutions. 2nd model different from the printer

  I was wondering if it is possible to install a 'package' aio P 410 P has as well as the existing HP 'photosmart premium' solution 309?
  Last year, I found the HP Solution sw installation twice... do so freaked out my PC
  THX

  Ok. Does a not reinstall the entire suite. Web application for HP found my printer... added driver only

  Different printer aio adding of "Solution Center" app did not work
  THX

• Keithley 2100 error 410 request interrupted

  I use a more complex system, but I have dumbed it down to the simplest form. I get an error 410 in a completely random way, resulting in a false collection of data. I was reading upward on this error and discovered that it was mainly due to orders being more quickly that they may be processed? But I ran my program with every 60 seconds and still give the error occasionally.

  There is no need to initialize the unit more than once - like Kiethly hate that since they have one lot of stuff to do other than your measurement.

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• query error - 410 in reading R & S fsp30 Analyzer using agilent usb-gpib?

  Dear users of or,.

  I'm new to Labview. I use labview 8.6.1 to retrieve data from the fsp30 Analyzer R & S helps Agilent gpib 82357 B usb. When I use the trace reading VI provided by R & S, I had problem of query - 410 error code and only get a table of 3 data elements. Could help me solve the problem take I can true data table?

  Thanks in advance!

  Jstin

  It is a specific error of the instrument and should be explained in the manual.

  If you need additional assistance, provide an explanation of the error and the code you are running. Someone with experience with the instrument may be able to see something.