Audition CC 2016 Record 2 microphones with the help of the audio interface

Similar Questions

• I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

  The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

  Ciao.

• We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  Unfortunately, if you have lost the product keys for Microsoft software, you will need to buy new software.  Visit the Microsoft store on genuine Microsoft software.

• Any camera regardless of the interface is available for use with the LabView interface.

  Hello

  I intend to go for some CMOS camera,

  but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.

  The question is

  1. is a camera regardless of the interface is available for use with the LabView interface?
  2. Can I build a VI to communicate with any device image and recording of camera and take the data?

  Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.

  Thank you...

  Hello Virginia,.

  I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.

  I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.

  See you soon,.

  -Joel

• Problems with the audio using Hulu on Apple TV

  We meet a few important issues in streaming Hulu through Apple TV. The problem is with the audio. When we start a new episode of a television show, frequently, there is no audio data. The audio plays fine during the advertising leading up to the episode, but then he went to the start of the episode itself. Last night, for example, we tried to watch an episode of Casual. No sound. I restarted the same episode 3 times (which meant, annoyingly, I had to attend the same ad 3 times), and each time it was audio at the announcement, but then no sound during the episode. I unplugged Apple TV, wait a minute and plugged in. Choose the same episode and had the same problem.

  Before last night, we were sometimes able to get audio on Hulu content, but it is seldom worked without similar problems - there is no audio data, or sometimes there will be audio briefly but then it disappears. We will not experience this problem streaming other services by the Apple TV, such as Netflix, HBO or with iTunes media. Any advice?

  It is a second generation Apple TV, purchased in September 2010.

  Exactly the same problem with Hulu here on ATV2. Its been like that for months and only getting worse. Also, randomly that it recharges during playback. If you can spend the first few minutes of couple of a show (by the start/stop several times) it will play the rest of the show OK.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.

• Windows Media Player cannot play the file because there is a problem with the audio device.

  Original title: Media Player

  I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you

  Hi MikeMcKayXE,

  ·         What is the brand and model of the computer?

  Follow the suggestions below for a possible solution:

  Method 1: Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card, and then click Uninstall driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  You can see the following article for more information:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Let us know if that helps.

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

  Original title: speaker FOR desktop

  In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  How to solve this problem.

  Hello

  I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

  I would like to know some information:

  1. Have you tried to plug any other speakers or headphones?

  2. You did changes to the hardware/software before this problem?

  3. Have you tried using these speakers with another PC?

  Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Please get back to us with an update on the issue, we will be happy to help you.

• audio device / I have a problem with the audio device from my computer

  No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of

  I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!
  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• The Captivate offers the possibility of Visual highlighting, synchronized with the audio text?

  The Captivate offers the possibility of Visual highlighting, synchronized with the audio text?

  I knew what that s what I was asking the first question, not possible sorry!

• Interact with the user interface components

  I'm trying to find a GOOD way to interact with the external classes user interface components. For example, that you have a 'controller' class that needs to access the view of the user interface in some way (define a label text or something else). The controller class does not do anything, it discusses only the logic of what should be the case. Currently, it is created by my top-level class when the program starts. He listens to some events occur and needs to update/interact with the user interface or the State of the application depending on what events are. I do not seem to be a way for this controller class to easily access the UI component that I need to get my hands on.
  
  I'm trying to do to reduce the size of a file of mxml WindowedApplication growing (LOOK cool but that is not important) and take part of the logic of the application of this file.
  
  It's complicated by the fact that the label is in a State that does not have the status of 'base' (so it is not a child, or even a subsidiary child of the main class at boot time) and by the fact that it is not yet near a high school component. (If that were the case, I could probably just pass the label object in the constructor for the outdoor classroom.)
  
  In other words, I can't just call getChild ("labelName") on my 'main' request object because it is buried nested inside OTHER components. I don't think I like the idea to browse all components and sous-composants recursively looking for the component that my outer class trying to ask. I thought about other ideas, but I don't like any of them enough to try them, eh.
  
  I'm at the point now about where I come to the conclusion that my fundamental design strategy is wrong, or Flex just not allowing complex applications where the GUI components can interact with external classes relatively pain-free. I'm not convinced that "Flex cannot do', I'm looking for advice on some great Flex application in all design patterns.
  
  Where do you put this kind of control logic, and what happens when it starts to overflow and become so large that you need to break in other files?

  Found a solution, I think that's what I've been looking for:

  http://labs.Adobe.com/wiki/index.php/Cairngorm

• Problems of microphone with the Satellite A200 - 14 d

  HI when I try to talk on Skype, on the other side either does not hear me, or they hear me very bad.
  I tried pluggin in the headphones and they work, but whenever I turn on my computer, the settings seem to have disappeared. In the Panel that I'm on the microphone icon (speech recognition), I do not change anything, just check those, and then it starts to work.
  How can I save the settings so that the microphone works, and or to the built-in microphone working properly?

  Hello

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Good bye