AUS Substem for the application of basic Unix

Similar Questions

• This computer is no longer allowed for the applications installed on your iPhone

  I tried to sync my iPhone 6 more with iTunes in my MacBook Pro.  During this process, a window popped up that says, "this computer is no longer allowed for the applications that are installed on the iPhone" iPhone 6 more "." You want to allow this computer to items purchased from the iTunes Store? »

  I clicked on allow and another window popped up that says, "Enter Apple ID and password.  If you have an Apple ID and password. Enter them here. "(If you use the iTunes Store or iCloud, for example, you have an Apple ID.)  "You can authorize up to 5 computers for each Apple ID."

  Apple has recently replaced the logic board on my MacBookPro (early 2011).

  There are 3 iCloud Apple ID.  First of all, I allowed my MacBook Pro.  Then he asks the password of the Apple ID for my iPhone 4.  While I was still with my iPhone 4, there was a problem and Apple technology had me install a new Apple ID.    Then I was asked for passwords for the Apple ID for iPhone iPad Air and 6 more.  Then another pop-up window says, "the authorization of the computer succeeded."  "You have allowed 5 computers on your 5 available."

  This could be 5 'computers' if Apple still has the original map of the logic.  It is always 1 MacBook Pro, which has a new logic board and if I called the Apple Support, I guess the UUID hardware is Apple going to buy and I did that for this new logic board, but not for the old.  I would have thought when the old logic board has been subscribed by technology, he or she would have known in order to erase the original UUID for my MacBook Pro in the main Apple system and replaced it with the new.  BTW, the old logic board works great.  It was the video card that was bad and my computer has a problem to wake from sleep or boot.  Everything worked very well when I took it for repair, so technology might have gotten the UUID of the old logic board.  Since I'm not a computer tech, I'm probably missing something.  I don't understand why I had to do it all.

  So, how can I get this problem fixed then the old logic board is not counted?

  Thanks in advance!

  Note: where it is said to 'Select a category', 'importing & Burning in iTunes', was the closest I could come to picking a category.  If I posted this in the wrong place, please move to the community right and made me know.  Thank you!

  You need not do anything.

  If, in the future, you need a permit for a new computer, then just reauthorize all, then allow all of your active computers.

• I have an error that says"the application-specific permission settings do not permit grant local activation for the application of the COM CLSID/w Server (BA 126ADI-2166-11 D 1-B1D0-0008 (OSFC1270))

  The error indicates that the application-specific permission settings do not grant approval to local activation for the application server COM with the CLSID (BA 126ADI-2166-11 D 1 - BLM - OO8 OSFC127OE) to the user NT Autoritative / network service SID (S-1-5-20).  The error message says it can be changed by using the component services administration tool.  I can't say what to do when I get to the admin tools.  Can you help me..

  Hi mildrednorcross,

  1. when exactly you receive this error message?

  2. is your computer connected to the server or the domain?

  If your computer is on a domain network, your question will be better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• Apex 5 on PDB not work. works very well on the root - ERR-7620 could determine no workspace for the application (4500)

  Hi all

  I recently installed Oracle 12 c and Apex 5 on a new server.

  My apex 5 installation went well. I can access it without problem at the root on its default port 8080.

  Later, I created a new pdb file (cloned from pdborcl) and created a new schema.

  as sysdba, I started a new instance of the Apex on port 8888, but when I try to access it through the http://IPAddress:8888 / apex / or apex / http://IPAddress:8888 / apex_admin I get an error (see pictures below)

  Can someone tell me please in the right direction.

  Should I do an install fresh apex 5 on the PDB? I thought that if I installed as sysdba on the CBD, the pluggable DB would inherit apex 5. Help, please

  ERR-7620 could determine no workspace for the application (4500)

  ORA-01403: no data found

  
  

  (DOES NOT NOT ON PDB)

  

  
  

  (WORKING ON ROOT)

  
  

  
  

  
  

  Hi John,.

  What you said is exactly the problem you will encounter if patch 20618595 of the database is not applied before the APEX upgrade to 5.0. In addition to the opatch apply the approach, you also run $ORACLE_HOME/OPatch/datapatch? At run time, you guarantee that all-ins databases have been opened after the start of the database to the top by issuing alter database connectable to all open?

  Finally, you have indicated that you have installed it on a new server. Is your main interest just to have a new 12 c CBD with APEX 5.0 in it? If Yes, you can do the following to avoid the problem you are experiencing currently.

  (1) create a new 12 c CBD

  (2) connect SYS as SYSDBA to CBD$ ROOT and launch a 4.2.5 or newer version of apxremov_con.sql. If the database that you created in step 1 is 12.1.0.2, you can just use $ORACLE_HOME/apex/apxremov_con.sql

  (3) connect SYS as SYSDBA to CBD$ ROOT and run apexins.sql from the source 5.0 specifying positional parameters, as you normally would

  Kind regards

  Jason

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• I was charged twice for the application of export it in PDF format. How can I cancel?

  I was charged twice for the application of export it in PDF format. I want to cancel both. How can I do this? I failed to export the PDF to Word, and I am not satisfied with this product.

  Hi Kate, Canada

  I'm sorry that ExportPDF has not worked for you. Please see to cancel your subscription or membership. Acrobat.com online services.

  Best,

  Sara

• Change password for the application from the apex

  Hi friends,
  
  I created an application of database in the apex, for this application in the login page, that I need to set as
  
  Forget the password link or change the password link, assume that if the end user clicks that link means, there ask for the
  
  New password: and confirm password
  
  shortly after he entered the password if the user connects to the application of the means, he needs to go inside the application. .........
  
  
  Normally to reset the password for the end user for the application, we will do it on the side of the administration of apex
  
  It is that we will give RESET PASSWORD OPTION to change the password for the end user...
  
  My question in this sense, that the end user must change his password by itself in the front end application...
  
  It is possible to like that in the application of the apex...
  
  How friends,
  
  Kind regards
  Mini...

  The problem is that you have specified a different page than the page of connection (due to which your login page used the builtin page). During the passage of the authentication, you must specify that 101 is indeed your login page (disabled by default)

  Here's a screenshot of it.

  So, in your workspace, choose current change, choose the authentication name and when you get to this screen tick the checkbox and submit. You should be prompted for your login page (which corresponds to the theme). This should solve the problem.

• Urgent - Custom authentication and authorization for the application of the ADF

  Hi friends,
  
  Custom implementation for authentication and authorization for the application of the ADF
  
  My project to use the OID , authentication and authorization, we will need to support both OAM and DB tables ( according to the preferences of the client during the installation ).
  
  I am new to this and do not have a clue about the same.
  
  Please guide me how to set up both in JDeveloper 11 g + ADF
  
  Thanks in advance.

  The answers you got up to present every point in the right direction. ADF security see the authentication of WLS, even for business authorization with respect to user roles defined on the WLS server. During the deployment, ADF security defined application roles are mapped to the user enterprise groups

  Application developed using Jdeveloper ADF +.

  This would use WLS for authentication

  Users of authentication - LDAP (OID) - are stored in LDAP

  Use the OID authentication provider in WLS

  Authorization - OAM or database (authorization details are stored in the DB or OAM tables)

  You can't allow users without authentication. If you need create authentication providers additional if they exist for OAM and RDBMS (there is a supplier of existing RDBMA, that you can use to identify users and to assign membership user groups). Then, you set the optional flag so that when authentication fails for additional providers you can always start the application.

  When running Admin users - create users from roles to create and assign permission privileges to the role (for pages and workflows)
  assign (or remove) the roles to/to leave users.

  ADF security uses JAAS to permissions that you can change using Enterprise Manager when running. Permissions are granted to the application roles and application roles are granted to business roles that which then has users become members of the. If you want to change the status of user account, then you don't do this the ADF or EM, but use a direct access to the provider of the user (for example, access OID, RDBMS access etc.) There is no unified administration API available that would allow you to do this via WLS (which uses OPSS).

  If your question is in the context of the ADF, the documentation, with that you should follow is OPSS and WLS authentication providers.

  Frank

• File/external source for the application config?

  Hello, I need advice.  My application on the device is simple: he composes the function codes to be managed by a server.  Currently, all function codes are hard coded in the application. I would like a way to ensure that these codes can be updated on the fly without having to recompile, re-sign and redistribute the entire application.  What would be the best way to achieve this and what I should look into?

  Edit: Develop for Blackberry Handheld Software 4.1 4.1 JDE for 7000 series.

  This method might have restrictions and is likely to have security in time to invite the first makes an http connection.  A BES admin could restrict the ability to download or add firewall constraints which would limit to this.

  Alternatively, if you want to avoid http and already have a mailing list you could send the configuration go out and have a message sink that updates your config file.  This would require that your application be signed and she also could be limited by a BES or permissions admin and could have a security prompt if a device is configured to request message connections.

  Basically, if you want to get third party data, a BES administrator could restrict.  It is not really a way around that if you want your application to have up-to-date data.

• When I change the Option for the Applications of Document Adobe, Firefox always manages documents in a different way.

  I changed my Options ask me each time I want to do with a pdf document. It does not work. What happens each time I click on a PDF as an attachment in e-mail or on a Web site, is that a Windows Explorer window asks me where I want to save the file. I don't want to save it, just open. I had always presented a selection of Firefox in the past, but the box Firefox offering options for me is no longer appears. I tried to change my Options/Applications in different ways, but the practice seems so have no effect at all. I'm using Firefox 27.0.1 on a Windows 7 operating system.

  Hello, to change the options for a PDF file, go to firefox > options > applications and scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• My iMac is freeze-Up When Safari using (no memory for the application)

  My iMac (OSX v10.9.5, 2.7 GHz, Intel core i5) freezes frequently (more than once a week) while using Safari (v9.1).  Safari suddenly stops working and the fearsome death spinning beach ball begins.  Quit smoking force works sometimes, but most of the time, all the computer freezes and I have to do a hard reboot of the computer power off then restart it from scratch.

  I left my open activity monitor and when it froze again today, I could see that the contents of the Web seems to be the problem area.  The Force Quit window says that my system is out of memory the application.

  When the computer is finally thaws after reboot, it works fine for a while then all of a sudden stops working when Safari freezes.  He has done when I'm on Safari, surfing on the internet or when it is in "standby".  Is not serious.

  Another thing, lately partial images appear on the screen and then disappear.  Images pixelated also but my office.  Makes me feel like the hard drive is about to crash.

  I was wondering what could be hogging memory? Web content?  How should I do if I can use my computer without having to reboot several times a week?  Thanks for your help.

  HotHunt

  

  How much memory you have installed? The image you posted shows nothing about what is the use of memory and how much. For this you use the activity monitor.

• problem with webcam for the HP 3125 basic model

  Hey readers, I've got this beautiful model HP 3125 basic and has a webcam at the top of the screen but could not find any original progams HP for this, also could not find it in download drivers, anyone know a camera trust hp progam, please help, thank YOU!

  Hello:

  It is the most widely used software for the webcam in HP laptops.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109796-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0008

• Problem with the mixer Volume of Windows: no longer shows the green bars for the application

  Hi all!
  Sorry for my bad English, but it is not my mother language: s
  I have a PC with Windows Vista Ultimate SP2 x 32 with this issue: the volume mixer show me the green bar (indicating the volume level) for the speakers and not for other applications like windows media player, for example.
  Perhaps this screen explains more: http://img11.imageshack.us/img11/4538/immaginevfo.jpg
  I hope someone can help me (if someone understands how I speak English: S)

  Thanks, TheDarkTrainer

  Hi TheDarkTrainer,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. What is the brand and model of the card its installed on the computer?

  2 - is the first time you encounter the problem?

  For single channel sound cards, you will only be able to see the green bar for Master Volume control and not for other applications such as Windows Media Player.

  Controls on other applications are given to control the volume of the special request regarding the Master Volume control.

  For example, if you scroll the bar to set the Master Volume to 100% and then play a music file in Windows Media Player. You can try to open the mixer Volume and increase/decrease the volume for Windows Media Player, you will notice that the master control will set the green bar accordingly and don't let not the green bar to cross the bar of the Windows Media Player.

  If you disable the control Volume for Windows Media Player, it will automatically make the green bar will disappear from the Master Volume control.

  However, if you have several applications running on the machine at the same time and using the sound card, you can try to change the levels on different controls to see the effect.

  With several cards his channel as sound blasters, it would be possible to see the green bar on individual applications also.

  Hope the information will help. Please post back and we do know

  Thank you & best regards
  Ashish Gupta - Microsoft Support

  ===================================
  Calm sea never make skillful sailors!