Authentication LDAP BI publisher

Similar Questions

• Change the role of the user once authenticated LDAP authentication

  Hi forum,
  
  I do know that if it is possible, I have not found a solution so far
  
  I have a simple web application with LDAP authentication. We would like to use LDAP for authentication and store the information of user roles in the database. After authentication, LDAP assigns the role of "guest" to the user and the home page (the only page available for this role) is displayed.
  
  In this home page, the user must select a profile (the same user can have multiple profiles) in a list retrieved from the database. The profile of each user has an associated role. After selection, we want to change the role of the user "guest" to the role associated with the selected profile.
  
  I don't think that implementation of a custom plug-in fits my needs because the role assignment requires the participation of the user.
  
  Any suggestions?
  
  Thanks in advance,
  
  Tatiana.

  Hello

  Well, the problem is that you need to change the subject of the user authenticated, who's a JAAS thing to do. The only way this can work is indeed use a custom LoginModule and then access the user object to add a security principal that represents the role you want to add.

  Frank

• How to set up authentication LDAP remote VPN access method?

  In most lab scenarios, documents only show us how to configure credentials local (AAA) or RADIUS to authenticate for VPN remote access.

  Could someone kindly post some documentation or lines of command on the configuration of the LDAP authentication (for example advertising server)?

  Appreciate any help from you...

  Hello

  You can check out:https://supportforums.cisco.com/document/139241/remote-access-vpn-asa-au...

  HTH

  Averroès.

• ACS 5.1 - AD authentication LDAP VS

  Any help on this would be great

  I can manage to get my account record in the thinking of Active Directory configuring cisco switch in the external identity stores but not my setup LDAP here are a few successful newspapers, log in and unsuccessful newspaper with ldap.

  AD-SETUP

  Selected identity store - AD1

  Current identity store does not support the authentication method; He jumps.

  GANYMEDE + will use the global configuration GANYMEDE password +.

  Returned GANYMEDE + authentication response

  Received authentication GANYMEDE + CONTINUE application

  Using the previously selected Access Service

  Political identity was assessed before; Sequence identity continues

  Authentication of user in Active Directory

  Recovery of the Active Directory user groups succeeded

  Active Directory user authentication succeeded

  After authentication

  Access policy
  Access service:	Default device Admin
  Identity store:	CDs
  Shell selected profile:	Privilege mode
  Active Directory domain:	Blah.com/results.htm
  Group membership:
  Access matched Service selection rule:	Rule-2
  Comparative political identity rule:	By default
  Some identity stores:	CDs
  Application identity stores:
  The selected application identity stores:
  Mapping of matching rule group strategy:
  Matching rule permission policy:	Rule-1

  The only problem with this configuration is that I can only add the domain blah.com/results.htm example and I get massive latency since the authentication process will over State to other domain instead of the local controllers.

  I can tell by the STATUS of the AAA in track because of dashboard that latency is about 8000ms and the slow, log on to the switch.

  LDAP-SETUP

  In my LDAP configuration I have a primary host name and secondary closer to home to avoid latency I do a test of bind that returns successfully on both hosts. Configure my Orgainzation tab directory and do a test configuration to get a return of the Group > 100 > 100 topic.

  I have reset my indenities to instead of AD LDAP stores and try again, but for some reason that I get 22056 object not found error! I can't just that work on here are the details

  Corresponding rule

  Selected Access Service - Admin default device

  Evaluate the politics of identity

  By default matching rule

  Selected - identity store

  Current identity store does not support the authentication method; He jumps.

  GANYMEDE + will use the global configuration GANYMEDE password +.

  Returned GANYMEDE + authentication response

  Received authentication GANYMEDE + CONTINUE application

  Using the previously selected Access Service

  Political identity was assessed before; Sequence identity continues

  Send the request to the primary LDAP server

  User authentication against the LDAP server

  The user's search ended with an error

  Main server failover. Switching to the secondary server

  Send the request to the secondary LDAP server

  User authentication against the LDAP server

  User not found in the LDAP server

  Object was not found in the identity of the point of sale.

  The advanced option is configured for a unknown user is used.

  The option 'Refuse' Advanced is set in the case of a request for authentication has failed.

  Returned GANYMEDE + authentication response

  Are there ideas, I can try so that it can find my account as the structure of the AD did? ideas please?

  see you soon

  HI Ed,

  Try using a standard LDAP browser (www.ldapbrowser.com ) to view LDAP structure.  Verify base DN used for searches matches
  
  structure.
  
  Regards,
  
  ~JG
  Do rate helpful posts
  
  

• ASA5510 authentication LDAP on W2K3 AD domains

  LDAP authentication works in all of the domains Active Directory W2K3 and several ASA5510 firewall? Or do I need to configure other authentication type? If I use another type of authentication should I specific portals with special bookmarks based on logins?

  The ASA can, via the LDAP protocol, multi-field search using Active Directory Global Catalog Server(AD-GCS) in a single AD forest.

  For more information about server Catlog Global features and configuration, please consult the Microsoft documentation.

  AD - GCS uses a special port 3268 for unsafe operations and port 3269 for sure (LDAP-S).

  The ASA CLI configuration:

  With CLI configure a server for AD - BSC AAA on the platform of the ASA/PIX.

  ASA # display running aaa-Server GC

  AAA-server protocol ldap GC

  AAA-server host 10.10.1.1 GC

  Server-port 3268

  LDAP-base-dn DC = MyDomain, DC = com

  LDAP-scope subtree

  LDAP-naming-attribute userPrincipalName

  LDAP-login-password *.

  LDAP-connection-dn CN = ldap-reader, OU = employees, DC = MyDomain, DC = com

  microsoft server type

  Note 1: The customer must have an attribute that is unique and simple in the ad so that it can be used for LDAP searches. UserPrincipalName or sAMAccountName are usually unique attributes that can be used.

  In this example, based on the name = userPrincipalName attribute, then the VPN user to connect with [email protected] / * / .

  Note2: mode in the Global catalog, not all LDAP attributes are returned (for example: memberOf) to allow the ASA to make policy decisions say through access policies Dynamics https://supportforums.cisco.com/docs/DOC-1369 .

• Authentication of BI Publisher using IDM

  Hello

  I need authenticate users who connect in BI Publisher using IDM. The IDM and BI are installed on different areas and WebLogic servers. Here's what I've tried so far:

  1 created the custom authentication provider and it deployed in weblogic.

  2. as the passwords are stored in db are encrypted I need a way to decipher the password comes from the db. I use following code to decrypt the pass:

  String decryptedPass = tcCryptoUtil.decrypt(encryptedPass, "DBSecretKey");
  

  The code itself works fine in Eclipse. To make this work, I have included in the classpath:

  • all pots that are located in $IDM_HOME\modules\oracle.jps_11.1.1
  • oimclient.jar
  • In the run configuration added after the VM arguments (here is the domain IDM configurations):

  -Doracle.security.jps.config=D:\oracle\middleware\user_projects\domains\zus_domain\config\fmwconfig\jps-config.xml -DDOMAIN_HOME=D:\oracle\middleware\user_projects\domains\zus_domain
  

  Now, to make it work in WebLogic BI, I've added all the jars to the classpath in the setWLSEnv.cmd file:

  set JPS_DIR=D:\oracle\middleware\Oracle_IDM1\modules\oracle.jps_11.1.1
  set CLASSPATH=%CLASSPATH%;%JPS_DIR%\jacc-spi.jar;%JPS_DIR%\jps-api.jar;%JPS_DIR%\jps-az-api.jar;%JPS_DIR%\jps-az-common.jar;...
  

  Now when I try to authenticate:

  1 authenticator successfully retireves password stored in db.

  2. when I try to decrypt it using above code I get following error:

  ####<2015-04-09 10:01:34 CEST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <PSosinski> <AdminServer> 
  <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> 
  <<WLS Kernel>> <> <3759beab00426ccc:-3fe7b1ed:14c9d2d88c6:-8000-0000000000000017> <1428566494604> 
  <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: {1}
  java.lang.NullPointerException
    at com.thortech.xl.crypto.tcCryptoHelper.loadKeyStore(tcCryptoHelper.java:87)
    at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.initKeyStore(tcDefaultDBEncryptionImpl.java:67)
    at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.getCipher(tcDefaultDBEncryptionImpl.java:96)
    at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.encrypt(tcDefaultDBEncryptionImpl.java:193)
    at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:118)
    at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:275)
    at oracle.iam.platform.auth.impl.Authenticator.encrypt(Authenticator.java:185)
    at oracle.iam.platform.auth.impl.Authenticator.authenticateWithPassword(Authenticator.java:160)
    at oracle.iam.platform.auth.impl.Authenticator.authenticate(Authenticator.java:133)
    at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMAuthLoginModule.java:44)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
    at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
    at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy39.login(Unknown Source)
    at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
    at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy57.authenticate(Unknown Source)
    at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
    at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
    at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:251)
    at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:200)
    at weblogic.servlet.security.internal.FormSecurityModule.processJSecurityCheck(FormSecurityModule.java:258)
    at weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:213)
    at weblogic.servlet.security.internal.FormSecurityModule.checkAccess(FormSecurityModule.java:96)
    at weblogic.servlet.security.internal.ChainedSecurityModule.checkAccess(ChainedSecurityModule.java:79)
    at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:82)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2213)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  > 
  

  Note, I did not provide HSD config or DOMAIN_HOME in the authenticator (to oppose the execution of the code in eclipse), run from the other area (probably not a good idea to change DOMAIN_HOME).

  Now the questions:

  1. advice on how to create the custom authenticator and make it work? IT seems that is missing a dependency. How do I provide all dependencies?

  2. perhaps there is already an authenticator can I download/use? I tried to copy OIMAutheticator that comes with the installation of the IDM. When I deployed in WebLogic BI it did not work properly (exceptions of mass).

  I was unable to run my custom authenticator who used libraries of IDM to authenticate in the domain BI Publisher. So I ended up with 2 different solutions and both work:

  1. I created another external application (jar file) used only to decrypt the passwords comes from idm using jdbc. Then I call the pot of my previously set authenticator - DDOMAIN_HOME pointing to IDM. In this way, the service of IDM is not required to run.

  2 OimClient is capable of recovering passwords of idm in regular form. Follow this link to learn more: Oracle stack: OIM 11 g R1: Getting IOM decrypted password for user

  Also be sure to create appropriate inside Enterprise Manager groups and their assigned custom roles as authenticators custom work only on WlsGroupImpl, WlsUserImpl.

• Authentication LDAP with P101_USERNAME, but we must define a different APP_USER

  We have Apex 4.2 using the authentication scheme 'Application Express accounts' with APP_USERS as 'BS1234 '.

  And our process of login()) P101 invoke:

  wwv_flow_custom_auth_std. Login (P_UNAME = >: P101_USERNAME, P_PASSWORD = >: P101_PASSWORD,)

  P_SESSION_ID = > v ('APP_SESSION'), P_FLOW_PAGE = >: APP_ID | » : 10') ;

  We want to start using LDAP/AD, such that we can

  (1) accept a user name LDAP as 'bob.smith' and to authenticate to Active Directory.

  (2) convert 'bob.smith' to 'BS1234' using a lookup table

  (3) to use "BS1234" as the APP_USER (for reasons of inheritance)

  We tested the APEX "LDAP authentication" system and it works fine, but it leaves us with "bob.smith" as the APP_USER.

  My current idea is to have serveral P101 processes. The first LDAP using P101_USERNAME/bob.smith authentication will occur.

  If this attempt is successful a second process will make the search and reset P101_USERNAME: = "BS1234."

  and if _that_ is successful we will call a custom authentication (always true) "minimal".

  The last stage of custom authentication is, in my view, necessary so P101_USERNAME is assigned to APP_USER.

  But could all three of these steps in a single custom authentication scheme?

  Custom authentication is new to us, and we are a bit confused with all the steps (Sentry, Proc of Session function not valid, authentication, post Logout Proc, Session not valid function check, proc and Proc preauthentication after authentication), so any ideas would be welcome.

  Hello

  You can do it with the help of LDAP "Authentication Type" himself. No need to create type "Custom authentication.

  You can use APEX_CUSTOM_AUTH. SET_USER APP_USER setting procedure

  1. Create procedure with output parameters for example set_apex_user.
  2. In this procedure, use v ('APP_USER') to get the LDAP username at the start. Get your username lookup table APEX and set APP_USER using APEX_CUSTOM_AUTH. Procedure SET_USER
  3. You must call this procedure in your "LDAP Authentication Scheme',"Login Processing"topic, like"name of the procedure after authentication.

  I hope this helps.

  Kind regards

  Hari

• Authentication LDAP for OSB Services

  Hello
  
  I would like to know how to secure the proxy services to be accessible only to users selected in a given LDAP configured under weblogic "providers."
  
  For example, only test1 and test2 users should be able to access the methods and the proxy service.
  
  Same kind of access control is also possible with roles? that is, only users assigned to a particular role must be able to access the proxy service.
  
  Please note that we do not want to use GOSA.
  
  Thank you.

  Please see section 'access control strategies 45.5' to.

  http://download.Oracle.com/docs/CD/E17904_01/doc.1111/e15866/model.htm#i1063159

  See also-

  http://download.Oracle.com/docs/CD/E17904_01/doc.1111/e15866/message_level_cust_auth.htm#i1069719

  Kind regards
  Anuj

• LDAP authentication on vty router login

  I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html

  But my scenario was unlucky

  My config is...

  _____

  AAA new-model

  !

  !

  AAA server ldap ad1 group

  test server

  !

  AAA authentication login default group local ad1

  AAA authorization exec default authenticated if

  !

  jump...

  !

  map1 LDAP attribute-map

  user name of card type sAMAccountName

  !

  test LDAP server

  IPv4 172.16.107.145

  attribute map map1

  Retransmission Timeout 20

  bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809

  base-dn CN = users, DC = fabrikam, dc = com

  _____

  instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect

  I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.

  I used the ldap debugging all the

  This is the output

  * Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application

  * Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA

  * Jun 9 19:38:45.414: LDAP: LDAP authentication request

  * Jun 9 19:38:45.414: LDAP: no attributes to check username mental health

  * Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!

  * Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon

  Note the last string. Is that what it means I can't use ldap for this?

  What I've done wrong?

  I am grateful for!

  LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).

  CSCug65194    Document nonsupport LDAP for authentication of connection

  AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the

  following message is syslogged:

  "LDAP: LDAP does not support interactive logon [sic]."

  This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():

  If (intf & intf-> ATS) {}

  LDAP_EVENT ("LDAP don't suport interactive logon");

  ldap_method_failover (proto_req);

  Jatin kone
  -Does the rate of useful messages-

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• LDAP authentication

  Hello!

  Now someone if Cisco ASA 5500 supports authentication ldap in worm Netware 6.x via vpn Cisco client servers. / Best regards

  Jonny,

  LDAP server is supported in ASA 7.1 and higher.

  Please see the below URL for more information:

  http://www.Cisco.com/univercd/CC/TD/doc/product/multisec/asa_sw/v_7_1/conf_gd/AAA.htm#wp1072211

  I hope it helps.

  Kind regards

  Arul

  * Please note all useful messages *.

• OBIEE LDAP authentication

  Hi guys

  We have recently implemented authentication LDAP for OBIEE.

  We use Microsoft Active Directory to authenticate OBIEE.

  The strange thing is some users may connect to obiee which is part of the ldap system and some users cannot connect to obiee,.

  Both users, who can and can not connect is part of the same groups.

  What password restrictions, may be that the password for this user is complex or simple?

  Are there any standards OBIEE password during authentication LDAP?

  Best regards

  Benoit

  Hello

  Yes, this is 'above' default values and that's fine (all together for 'SUFFICIENT', I hope), but they are all in the field of security of the WLS that is what OBI uses through the spine - i.e. the OPSS, the Security Service Oracle platform.

  My point was that when there is an authentication problem and your key authenticator is MSAD, then the problem there or in integration, but not the final interpretation application which is OBI.

  So you have to go through all of your integration-related settings to security, check if you can actually take the user and groups through the WLS console, for example, ensure that the identity store config contains the correct mappings for user.login.attr/username.attr, PROPERTY_ATTRIBUTE_MAPPING, and/or that you set him virtualize = true in order to use several security vendors.

  In addition, get a LDAP browser to check what is actually the MSAD. I've seen cases where the LDAP protocol connected to OBI was a clone / secondary instance and contains corrupted user input that had to be cleaned from LDAP.

• Integrate Oracle BI Publisher with Oracle Form [authentication]

  Report & Oracle FMW 11g R2 (11.1.2) form

  Oracle BI Publisher 11.1.1.6

  Oracle Database 11 g Release 11.2.0.4.0 - 64 bit Production

  
  

  With the help of the link below, I want to integrate Oracle BI Publisher with Oracle form
  

  http://www.Pitss.EU/fileadmin/Pitss/images/de/White_Papers/White_paper_BIPublisher_WebServices.PDF

  But I need to know one thing, as mention in link, weblogic user/pwd in the java code for authentication with BI Publisher, above

  My Question here, what is the best way to manage authentication with BI Publisher while integrating with Oracle Form?

  I think, in a document, just to mention for example,

  It will not be advisable if keeping the user weblogic/pwd in Java code, at the end of this java code becomes a jar file and deployed to the server and then downloaded to the client computer. ensure that completely and the values are hardcoded, if the password change question once again, this means having user/pwd in jar will never be a good solution.

  For a quick overview, I'd do it keep advice the user/pwd in db in encrypted form and access to oracle form with decrypted and pass the value in the api ReportServiceClient.CallRunReport)

  If you feel, every time you need to access user/pwd of db and decypte it, that I advise you here, get user/pwd when set in the context of db and out of context with decrypted.

  Another may be the best idea.

• -Error 500 internal server when you use BI Publisher in OBIEE 11 g

  Hello!

  When you access a report created in Plubliser BI using LDAP users, you get the error message:

  Error 500 - Internal server error

  They know tell me if I need to configure anything on the Administration > Manager of BI Publisher?

  Thank you!

  Carina Mendes.

  Hi Felipe,.

  We have solved the problem,

  We had DefaultAuthenticator users and LDAP equal, it's contradictory authentication on BI Publisher.

  We have solved the duplicity of eliminndo of the problem and make a guide of refreshment.

  Thanks for the support!

  Carina Mendes.

• Windows 7 genuine becomes suddenly not authentic

  My PC has been run on Windows 7 Ultimate 32 bit for over 3 years with no problems. We ran the monthly Windows Update without any problem.

  Suddenly, a message pop - up to inform our copy of Windows is not genuine and asked us to run a file. He then asks us to buy a new copy of Windows. When I go to control panel, System: it clearly states that Windows is already activated with the product key.

  It's MGADiagnostic report:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 6TYPK - 9K33J-4K7HK
  The Windows Product Key hash: 3Lsm6f50Y7ExEg/CN + gIF6fNWzQ =
  Windows product ID: 00426-OEM-9154295-92932
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {0AEAB57F-3997-41CC-82F2-0ED85B0B8367} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.150316 - 1654
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Publisher 2003-100 authentic
  Microsoft Office Small Business 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {A4A4284E-D601-477F-BCC4-E24C16083880}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-4K7HK00426-OEM-9154295-929323S-1-5-21-1682336871-3812369473-2183448178Gigabyte Technology Co., Ltd.. P55A-UD3R Award Software International, Inc.. F5 20091120000000.000000 + 000C1913A07018400FE0c 090409AUS Eastern Standard Time(GMT+10:00)03100100Microsoft Office Publisher 200311A330E6795C48578JEOXKEiM9lrhQZbbvwks1SysSvg =72082-700-2035882-551201100Microsoft Office Small Business 200712NImFl6SgHhS4l7nOqJBlCB57LJs =81606-906-5932207-644751 81DDFE742747F14

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00182-542-992932-02-3081-7600.0000-1142010
  Installation ID: 000690493624561085780976749383306830759363870701405083
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 4K7HK
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 10/28/2015-17:45:38

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:28:2015 13:41
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: OAAAAAIABAABAAEAAgACAAAAAQABAAEA6GH8wqwQYGmUipI8agMoC36 bAyumnyHYj2Q4bJJdlY plus

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  TAMG GBT GBT B0
  SSDT INTEL RCM PPM

  I hope someone can help!

  I did a scan for malware and found nothing

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For OneDrive help, see paragraph 9.3: http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm