Auto recording not happening when the value

Similar Questions

• Object that can be bound but not updated when the value changes

  I have an object that is declared as [Bindable], which is updated in a component that is also declared as [Bindable] However, when the value is changed the user interface shows the change but the linked object never gets updated.
  
  Are there cases where related objects do not updated?

  Yes, as I said, pass the name of the property and the value in the change manager.

  Support rating allows you to set the value, not a switch statement. Some examples of code.

  Tracy

• Header record not repeated when the detail records extend to more than one page

  Model RTF,
  
  1. I have one for each code of
  
  <? for-each@section:G_HEADER? >
  
  2. under "for-each", I have the header of the document is set in a row of the 1 table.
  
  The row for this table property is set to 'Repeat as header at the top of every page'
  
  3 in this, I have another table with the fields for data LINES with its own code "for-each" <? for each: G_LINES? >
  
  4. follow-up of the end for the two above "for-each".
  
  However, when I generate the PDF output in overview, data lines extend to more than one page, the header record is not repeated on the following pages. Anyone has any ideas of how to solve this
  
  My version of the XML Editor is 10.1.3.4.1 build 130. I have an example of data and model, but don't know if I can download it here.

  Use this logic

  
  INFORMATION HEADER TABLE
  

  DETAIL TABLE
  

  and keep this in the header then it is displayed even though the detail data go to more than 1 page.

  If this helps please give me a few points

• HP 1000 1408AU: painted does not appear when the value.

  Hello

  My origins do not appear when I put them.

  Product name: HP 1000 1408AU

  I have a picture on my desk I would like to be and as my image background and when I right click and select "Set as background image" it does not appear, the background just stays empty. However, when I type the symbol windows on the keyboard (which takes us to the tiles) tile Office has my background image I selected. But when I click on the tile of office he does not come to the top.

  This problem occurred for at least 3 months.

  Also when I go into the control panel and then under the label "Appearance and personalization", there is "change destop background." When I click on this button and select my image, then click on save changes, it does not appear.

  Also under the same label "Appearance and personalization", when I click on the button "Edit theme", he says the image I selected is set on my screen, but it is not. The background on my desk is always empty. (Black Madonna).

  Could someone help me with this problem please?

  Thank you.

  P.s when explaining how to fix it please give simple directions front right for example click this and then he...

  Thanks again.

  

  Here's what looks like my background (even when an image is defined)

  

  Hi Russell

  Welcome to the Forums of HP Support!

  See if this tutorial helps you:
  http://www.eightforums.com/tutorials/29777-background-show-image-solid-color-Windows-8-8-1-a.html

  Concerning

  Visruth

• validator of AF: inputtext not called when the value of text by addPartialTarget()

  I have 2 text fields: display label & name.
  
  "< af:inputText label ="Display Label"value =" #{pageFlowScope.dispLabel} "required ="true"id ="it2"valueChangeListener =" #{MyBean.dispLabelValueChangeListener} "autoSubmit ="true"/ >
  
  "< af:inputText label ="Name"value =" #{pageFlowScope.Name} "required ="true"id ="it1' autoSubmit = "true" binding = "#{MyBean.nameField} ' validator =" #{MyBean.validator} "/ >
  
  
  ValueChangeListener display of the label, I put the value of the field name as follows:
  
  public void dispLabelValueChangeListener (ValueChangeEvent valueChangeEvent)
  {
  String newName = m:System.NET.SocketAddress.ToString () () valueChangeEvent.getNewValue replace () on .trim ("", "_");
  MyBean.setPageScopeProperty ("Name", newName);
  AdfFacesContext.getCurrentInstance () .addPartialTarget ("nameField");
  AdfFacesContext.getCurrentInstance () .partialUpdateNotify ("nameField");
  }
  
  I want the validator on the name field and get called & check if the name defined by the method above is acceptable according to the logic of my profession.
  If something I write it manually in the name field, the validator is called, but it is not get called every time that the field is defined by addPartialTarget () /partialUpdateNotify () as above

  Hello

  I think that this the default behavior. The validator will fire only after user input in the component.
  You can implement your validation in the first component value change listener according to your logic.

  Gabriel.

• The price does not appear when the value of another currency other than the U.S.?

  I have a shop that has two catalogs. A catalogue for the store, another the catalog for the Canadian store. Each product is in the respective catalogue.

  The only problem I have is that for the store Canadian does not show the price. The US Store works very well.

  I thought that this may be a problem with me being located in the United States, but a person to the Canada see it prices either. Whatever the situation, I prefer to show prices.

  How can I solve this problem?

  Pricing only works when you have other domains and setup of culture Lynda.

• Category of user accounts keep "logout" as soon as the password is typed in and click on the button "Enter". This does not happen when the user account Standard is passed to a user account administrator.

  Problem connecting to the computer. Commissioning is fine and all the "Administrator"users can log in and go online. " all standard users just have a message "connect to the wide" and can not same acess to the start menu.

  Problem connecting to the computer. Commissioning is fine and all the "Administrator"users can log in and go online. " all standard users just have a message "connect to the wide" and can not same acess to the start menu.

  Maybe you want to experiment to see if you children have corrupted their user profiles.
  Sign in to your admin account, set up a NEW standard user account, give it a password.
  Log this new user account. Is it effective?
  If so, you should "delete" user accounts for your children and start again.
  Note: If you start to remove their accounts, read the instructions. You have the option to SAVE your kids except their e-mail data.

  t-4-2

• U3014, DDM does not work when the value of DP to 1.2 (this is normal)

  The AMD Radeon HD 7700 supports DP1.2, but if I do it with the OSD menu, the DDM (Dell Display Manager) does not work? But the return to normal if defined DP1.2 on disable. Is this a bug or I made a mistake?
  Serial number U3014 P1V6N42N444L
  AMD Radeon HD 7700 Series
  Windows 7

  * Found the answer. Open the MDD for the U3014 Manual:

  FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/Dell-u3014_User%27s%20Guide2_en-us.PDF

  * "NOTE: MDD is not supported in DP1.2 / STD (Daisy Chain).

• property ignoreHostnameVerification does not work when the value programmatically

  Hi, I am using weblogic 10.3.2.0. In my code, I tried to set this property to system with
  

  System.setProperty("weblogic.security.SSL.ignoreHostnameVerification","true");

  as I saw in many places online. However, if I try this and then make an https request later, I still get the exception:
  

  Caused by: javax.net.ssl.SSLKeyException: [Security:090504]Certificate chain received from <snipped> - 192.168.184.170 --> <snipped> failed hostname verification check. Certificate contained ...

  If I just set the system property when booting the server (""-Dweblogic.security.SSL.ignoreHostnameVerification = true "as a parameter of the JAVA virtual machine"), the https connection works very well.
  
  This may be the cause? Why aren't as I can to set it programmatically?
  
  Thanks in advance, apologies so bad forum or an unclear question. If so, please advise.

  Hello

  In the code example, the weblogic.security.SSL.ignoreHostnameVerification property applies to the client that runs as a standalone application, in another JVM. In this case, the client ignores the host name that is exposed by server connection and digital certificate.

  Kind regards.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Mr President, when I do some changes on a page of its buttons on the right side convert (&gt; &gt;) sings two more. What is that this does not happen and the buttons are always visible?

  Mr President.

  When I convert a few changes on a page of its buttons on the right side of the page (> >) sings two more.

  What is that this does not happen and the buttons are always visible?

  Concerning

  Did you try what I suggested?

  listed AFStretchWidth styleclass property of panelGroupLayout and remove the box toolbar tools just use inside grouplayout

  If this does not work please share your xml source

  Thank you

• In the column of table when the values are grater that maximum linear axis it does not show the bar

  Hi guys,.

  In the column of table when the values are grater than there maximum linear axis it does not show the Bar.But I want to display the bar up to the maximum limit of the axis is linear without changing the limit max.

  Consider following the example:

  The values are 80 90 200 300

  and here is the result:

  Left: when I don't put maximum property of linear axis.

  Right: when I put in maximum property of linear axis to 200.

  

  Law 4th bar is not visible because the value of this bar is 300 which is excedding maxium. But I want the 4th bar to appear identical to 3 bar.

  How can I do this?

  Thanks in advance.

  Then you should change the value of Y to the maximum value.

  Another option, you should consider is changing the Render item column to reflect that the value is greater than the specified maximum value.

• Script where the zero is not displayed when no value is selected, indicates when a value of zero is selected

  How can I write a calculation script where the zero is not displayed when no value is selected, but when a value field null is selected as part of the zero calculation will show?

  Option 1 has a score of 0 value

  Option 2 has a value of 5 score

  When someone chooses option 1, I want the value 0 to appear at the cell of notation.

  Here is the script that I have so far:

  If (event.value == 0 | event.value == ") event.value =";

  OK, the custom calculation script could be:

  Get the value of the checkbox field

  var v = getField("checkbox1").value;

  Set this field value

  V = Event.Value = "Off"? "" : v;

  Replace "checkbox1" with the actual name of the checkbox.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Font size set to auto but sounds different when the data are populated compared to typed manually

  I have a form where all the size of the font of fields is set to auto. When data are filled in the form in a custom program the font size appears different to the name and first name fields. When the same names are typed manually in the form (not filled in the custom program) the font size remains uniform. There is no coding in the personalized program to manipulate the fonts or the font settings. What could be the cause of the change in the appearance of the font size. Another interesting is that after the program fills in the data, I can click in the areas affected by this problem and the police will change to what it should be but set in the right size once I have quit the field. I also see that some fields when filled will not be characters fat even if the police is set to a bold font.

  When a font of a field is set to Auto, Acrobat/Reader dynamically adjust the font size to match what is entered. When not using Acrobat/Reader to populate a field, it belongs to the program to properly set the font size based on the value of the field. Adobe does not publish any algorithm they use to determine the exact size (depending on the font used and the coordinates of field), so that a third party should use a better estimate (or not even trying at all), that looks like what is happening in your case. When you click within a field by using Acrobat/Reader, the font size is adjusted dynamically, but because the value of the field does not change, it is not defined when the field loses focus.

  A possible solution would be to use JavaScript to record all the field values, reset the form and then fill in the form using the saved values, this would cause Acrobat correctly define the appearances of field.