Automatic paper size does not recognize the legal papers

Similar Questions

• Automatic update system does not recognize the successful update.

  Regarding automatic updates.  I have 36 log entries to show the successful update of Windows Vista with Service Pack 1.  However, at least twice a day, I receive notifications that Windows Vista SP1 KB936330 is an important update, available for download.  How can I make the system of automatic updates (which I run my endorsement) recognize that this update is complete?

  Hi Dalbro1,

  Welcome to the Microsoft Answers site!

  You need to uninstall all installations of Service Pack 1 on your computer and install the standalone service pack1 manually.

  To uninstall the service pack use utility Windows install cleanup, which will remove all facilities from your computer.

  To install Windows Install Cleanup Utility follow the below given link.

  Description of the Windows Installer CleanUp utility

  http://support.Microsoft.com/kb/290301

  Manually download and install visit Service Pack the below given link.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 4622 will not print simple controls because it does not recognize the paper size.

  Product: HP deskjet 4622 All In One

  operating system: Windows 7

  Software used: Quicken Starter Edition 2011

  My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.

  Someone at - it suggestions?

  xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.

  I hope this information is useful!

• Photosmart HP 6520 does not recognize the envelopes in Word for Mac

  I've been printing envelopes #10 my Mac from word on my old HP 309n-c with no problems.  I now have the HP 6520 and it does not recognize the envelope size.  I was in and made sure the print properties were positioned and I still get the error message that I have not match the paper size.  Any suggestions?

  Hello

  Choose file > Page Setup. Choose Page attributes from the settings menu, and then choose any printer from the Format pop-up menu for. Choose any printer ensures that your document can print on any printer that supports the paper size that select you.

  1. • If the Page Setup is not available, choose file > print. If the print dialog contains only two pop-up menus and some buttons on the bottom, click the triangle beside the printer pop-up menu.

  2. Choose Manage sizes custom from the paper size pop-up menu.

  3. Click the Add (+) button.

  4. Double-click the name of the paper size, and then type a new name.

  5. Enter values in the fields the paper size and margins of the printer and then click OK.

     Note: Make sure that the envelope is placed in the center of the printer with the flap upward

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• Satellite A30 PSA30E - BIOS does not recognize the HARD drive

  Hi all
  I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
  Does anyone no what I can do?
  Is it possible to restore the BIOS?

  Thank you

  Hello

  You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

  Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
  If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

  Please provide more info. You see error messages?

• PC does not recognize the third HD

  I would like to add a third internal HD to my PC via a SATA connector, but my PC is so far not recognize my third drive after connection.

  Data sheet:

  M7664X http://support.hp.com/us-en/document/c00771737

  MB: A8M2N-(Bios 3.10) http://support.hp.com/us-en/document/c00783678

  Win 7 Pro

  GPU and upgraded PS

  Current readers and connections;

  C: SATA HD with OS and only for programs

  D: optical drive SATA

  E: SATA HD for storage of all the

  *: Original optical drive connected with IDE cable but is no longer recognized after that I recently installed Blu Ray compatible optical drive.

  New HD 2 TB correctly connected to the power supply and cables SATA MB but when I start the PC, Windows does not recognize the new HD connected on the fourth slot SATA.

  Is there something I should do under PC Set UP to initialize the new HD that I jumped?

  Refusing to make waves is not an indicator of a life lived well. Refusing to make waves is the State that precedes the drowning. -Author Paul Coughlin

  If you are not sure of any stage, confused, DO NOT make changes.

  How to prepare a hard disk

  Start, Control Panel, administrative tools, then:

  • Click here to open the computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • In the left pane, under storage, click Disk Management.

  • OK, lets check in disk management. Your boot drive will display a Disk0. Stay away from that.

    Your 2nd hard drive will be displayed as Disk1.     Stay away from that.

    3rd (new) hard disk should appear as Disk2.      If it is this that "see you", then continue.

  • Click on a region not allocated on your "new" hard disk and then click New Simple Volume.
  • In the new Volume Simple Wizard, click Next.
  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.
  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.
  • In the Formater Partition dialog box, do one of the following:
  • • If you don't want to format the volume right now, click on do not format this volume and then click Next.
    • To format the volume with the default settings, click Next.
  • Review your choices and then click Finish.

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Microsoft does not recognize my legal copy of vista

  My copy of windows vista is legal and I have the product key information, but sometimes on my computer that microsoft does not recognize as legal copy

  Hello

  1 did you receive an error message?

  2 did you change on your computer?

  I suggest you to contact the support center of Microsoft for the validity

  http://support.Microsoft.com/contactus

  See also:

  Description of Windows Genuine Advantage (WGA)

  http://support.Microsoft.com/kb/892130

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Backup does not recognize the previous backup CD

  When you click on backup:

  1. backup does not recognize the last backup cd. The only beginning of path to create a shadow copy backup is to insert a blank disc. How can I fix it?

  2 ive run backup from one day to the next day while he created a cliché. In the morning, it is only 1/5 complete suggesting that it is not working properly. I canceled the backup. How can I fix it?

  3. If I try to do another backup he asks the cd of your previous (cancelled backup) despite the fact that it was cancelled and the cds do not exist. How to reset to ask these latest records backup?

  Since then, I have downloaded all windows updates but the problem persis

  Thank you, Kel

  You mean by cliché, creation of backup image, right? Shadow copy volume is not Windows Backup.

  If you canceled the backup Windows is trying to finish the last backup. It's normal.

  All over again, trying to backup in a different medium, an external HARD drive.

  At first is a stop at the backup in progress"

  1. Restart the computer
  2. Run as administrator command prompt and run this: wbadmin stop job
  3. Typing sdclt.exe in command prompt and click on change settings
  4. Connect your external HARD drive or DVD
  5. If changing the settings is not available, then click on set up automatic file backup
  I hope that it will work. Please let me know the results to help others.

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• OfficeJet Pro 8600 Premium error paper size does not match

  I try to print an envelope #10 that I printed several times in the past, but today I get the error that the detected paper size does not match.  I print on MS Word with the selected for the #10 envelope paper size.  I loaded the envelope properly.  Why is he not feel today when it was fine yesterday?

  Hello

  The application, go to Printer preferences. What size and type of paper is selected here?

  You have restarted your computer since yesterday?

  Thank you

• Computer does not recognize the CD/DVD drive

  For these last days, my computer does not recognize the CD/DVD drive.  I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs.  However, the computer does not recognize this drive.  I also wonder if it is a hardware problem.  The light on the drive is a constant in green, and does not have the Open button.  And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc.  Please advise...

  I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard.  You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/

  There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.

• iMac does not recognize the function analysis of the LaserJet Pro

  My iMac has OS X v. 10.7.3.  It does not recognize the analysis function of the HP LaserJet professional M1217 MFP nfw which is connected wireless.  I can print with the HP success but the dialog box not incllude not a scan option.  I can't scan from preview or iPhoto or (as suggested by some rsources).  I tried to connect the printer LaserJet by USB but that doesn't solve a problem either.  I uninstalled and reinstalled the software, including HP PrinterDrivers.pkg.  I get the automatic updates from Apple which have not helped.

  Hello

  I apologize for any inconvinence,

  The Director of HP taken do supported by Lion for some specific models, including the M1217.

  However, as mentioned above, only the latest version of the software supported by Lion. any prior version of the software is not supported by the operating system.

  If you have not installed the complete softwatre features attached to my previous post, please be sure to install it. It is compatible with Lion you will find listed on the download page.

  Compatibility: Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, Mac OS X, Mac OS X 10.7 
  

  I appriciate if you can guide me where you see the information that the HP Director is not supported by the OS, I can't take any possible measure to get it corrected.

  Thank you and best regards,

  Shlomi