New installation of XP PRO sp3 does not recognize the 500 GB HD

Similar Questions

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• OfficeJet Pro 8600 does not recognize the 2nd paper tray

  I've set up the 2nd tray in system preferences by checking the box for an additional tray, although it seems sometimes to uncheck because when I go back to it is checked, it is not. Somewhere I found the Source setting and I saw 2 trays, but now I don't remember where it was to check again. However, when I try to use the parameters to define a default tray and lock in the status bar on the printer itself, it simply does not list the second set as being there. So there is nothing to choose or define. At one point, even though I didn't click to print, it seemed as if he was going to print something but then says there is more paper in the tray. But there was.

  I am on an iMac 10.8.5 OS and just bought this printer. I connected with ethernet.

  Hello

  I ask you to try the procedure described in the following link:

  http://support.HP.com/us-en/document/c03160525

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Satellite Pro A200 does not recognize the hard drive, XP Pro

  When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

  Any help appreciated

  Dave

  Hello

  If you are using the 64 bit OS, then also use 64-bit drivers.
  I found very nice HowTo from Toshiba.

  Check it! It s certainly interesting and should be useful.

  * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy

• MacBook Pro 2010 does not recognize the (formatted) SSD

  Hello

  I saw a lot of topics on it and did some background reading. But in short, a 13 "middle MBP 2010 is simply show folder-question mark icon when starting after having inserted a 850 EVO Samsung newly formatted (option + cmd + r to try to start internet recovery mode and do a clean install of holding).

  I tried to solve problems using other my Macbook Pro (a model 15 mid-2010 ")-Exchange the SSD back between the two machines, and I get different behavior which is what is so confusing.

  The steps I have taken to date include:

  -Insert the (unformatted) SSD in 13 "MBP. Hold down cmd + option + r download icon question mark.

  -Insert the (unformatted) SSD in MBP 15 ". Hold down cmd + option + r. get starts in the recovery of the internet where I could format the drive!

  -Replace the (newly formatted) SSD in 13 ". Hold down cmd + option + r. Yet once the icon question mark.

  To make sure that I was not screw up internals I put the old hard drive back in 13 "and he started very well. It's a relief at least.

  So I'm at this stage. Someone please correct me if my reasoning is wrong...

  -He's not the SSD because my model 15 "it recognizes and plays well.

  -It has No internal features of the computer, because it always starts on the old HD when I reinserted it.

  -He could be the SATA cable. (I tried to change place than my 15 "model, but the orientation is different and I didn't take the risk of rupture of the cable).

  -It could be a PEBKAC

  In the meantime I'll install a clean version on the operating system on the new drive while it is in the MBP 15 "work. Then, I'll try once more. But I don't hold any hope as the 13 "MBP doesn't recognize the SSD when would be the model 15".

  This is the model 13 '

  Thisis the model 15 "

  Any help at all is greatly appreciated. Thanks in advance!

  You probably replace the SATA cable in the MBP 13 ".  This phenomenon has been reported several times on these forums.  An SSD will start the MBP externally but not internally, and the original HARD drive will start the MBP even internally.  A new SATA cable solved the problem.

  I do not offer a 100% guarantee, but I suspect that the chances are good.

  Ciao.

• Satellite Pro A60 does not recognize the accept/DVDs blank

  My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

  In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

  My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

  Help please!

  Post edited by: EDS

  Hello

  Have you also tried to burn DVD-R discs?
  I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

  I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

  Also check the Toshiba page for an update of the firmware!

• Win XP Pro sp3 does not recognize USB devices.

  I get the message "(défaillant ou inconnu)." "Install driver or driver not required" (!) Can't uninstall/reinstall driver in Device Manager. What should I do my Canon 40 d DSLR recognized? The camera is perfectly functional.
  UPDATE! I used a different USB cable and the problem disappeared. That would be the life that were easy!

  Hi Michael,

  As you mentioned, the problem disappeared using another USB cable, it means that the USB cable has gone wrong.

  You can continue to use another USB cable to connect the Canon 40 d SLR digital.

  Hope the helps of information.
  Please post back and we do know.

• Adobe pro 9 will not recognize the .xlsx (Excel) files to combine documents into a single PDF

  I have yet to understand why Adobe pro 9 does not recognize the .xlsx files to combine into a PDF file. Need this problem solved quickly before our high season resumes. any suggestions? I know that you can save the Excel worksheet to a PDF document, but it takes too much time and space on our server. We must be able to combine the Excel file with files Post Script together at a time instead of going back to add more later. We are constantly updating of spreadsheets on a daily with the type of business that we do, you can understand why save the worksheet in PDF format updated every hour is a problem/waste of time.

  Thank you

  Brittany

  My guess is that you have OFFICE 2010 or newer. AA 9 PDF Maker that is necessary for what you want to do is not compatible with OFFICE 2010.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  I didn't come across this link, so I tried to copy the desktop flash player and installed it from there. Thank you, in any case.

  Sent from my Verizon Wireless 4 G LTE smartphone

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges

  My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.

  When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902

  The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.

  I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.

  I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?

  Hey @Leathert,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.

  I hope you get your sorted question and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.