automatic start of vCenter device?

Similar Questions

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• Patching vCenter device 6.0.0.10200

  Hi all

  I tried patch vCenter device via command line. I mounted the ISO FP and started with this command:

  firmware Stadium - iso

  It has worked so far. Then I run the present:

  staged installation of software packages-

  Here is what happened:

  [2016-04-13 15:02:24, 415]: packages 1/1 copy software

  [2016-04-13 15:02:24, 450]: duration test transaction...

  [2016-04-13 15:02:27, 417]: pre-installation script execution...

  [2016 04-13 T 15: 04:25.104]: Services stopped.

  [2016-04-13 15:04:25, 909]: firmware upgrade...

  [2016 04-13 T 15: 04:27.104]: package upgrade failed

  [2016-04-13 15:04:27, 144]: from all the services...

  [2016 04-13 T 15: 09:38.104]: Services began.

  [2016 04-13 T 15: 09:38.104]: installation process failed at the stage of the upgrade

  How can I find out why it failed?

  Check if help: Re: vCenter Server Appliance update and VMware Tools

• Unable to add previous hosts to vCenter device

  Greetings.  We are migrating our guests to new hardware.  We had three hosts for running ESXi 5.5.0 - 1331820 with the vCenter device on one of them.  Everything worked well.  In the process of moving virtual machines around, vCenter device has been deleted (intentionally).  We recreated the device of the OVA 5.5.0.5201 vCenter and ran through the Installation Wizard as previously.

  Now, when you add one of the existing hosts to vCenter, it finds the host and displays information.  When the user clicks on finish, it works quickly up to 80% and the host appears, and then disconnects.  The log shows: add host independent, added host, unable to connect host computer in the data center; connection error host, removed in the data center.

  The error showing is: cannot communicate with the specified host (x.x.x.x). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Now the stupid thing is that we can not even add the host on which the vCenter unit is on.  In addition, all hosts and vCenter unit are on the same network of management.  There is no firewall doesn't block all ports.  I read through a lot of the display of the Knowledge Base, and most is in regards to incorrect IP addresses or ports blocked or similar.  I checked through everything and could not find anything wrong.

  
  

  Last thing is that we amazed the ESXi host that had the vCenter device on it and re-installed 5.5.0 - 1623387 ESXi (version a little more recent than before) and reinstalled the that vCenter device exactly as before.  Now we can add that the host but still cannot add other hosts.  So it appears the issue is something with the hosts and not the device vCenter. 

  
  

  Anyone have any ideas?
  

  I run in to the same kind of problems with other factors.

  FWIW, have you tried the following in this order? 1 stop the vpxa on host, 2 service. Stop the service vmware-vpxd on the vcenter server, 3. Start the vmware-vpxd on the vcenter server, 4 service. Start the serivce vpxa on the host. Then try to add.

• Implementation of host Windows XP to automatically start guest VM at startup XP

  I apologize if this question has been asked and answered before.  I looked around, but did not find a similar question/answer.

  I want to have my Windows XP host computer to automatically start a VM guest whenever the XP PC is restarted.  Is there a way to do this in the background without having to connect to the host first?  If each Workstation can run only after cutting into account the host how to pay this account so that the Workstation automatically start and for that workstation will automatically start a VM specifice?

  Thank you in advance!

  The only VMware product that can auto start VMs without connection is VMware Server or ESX.  ESX will have to wipe your hard drive, which leaves just the server.

  Officially, the server does not support versions "desktop" of Windows as hosts.  (Just Server versions of Windows are supported.)  However most people have success with Windows XP as a host, especially with the old server of version 1.  Many people say issues with server on Vista a Win7 guests.  Just so take that into account if you ever upgrade your host.  Limitation of server 1 is it only supports USB1.  If you need for USB2 devices, then you'll want to Server 2.

  Me personally, my usual recommendation for automatic start of machines virtual Workstation or Player is to put just the virtual computer shortcuts in the startup folder.  Automatic opening of Windows logon.  (I prefer TweakUI Powertoys from Microsoft since it is a simple GUI and doesn't require editing the registry).  Then make shortcuts to the virtual machines in the Start Menu folder.  If you want security, then have a screen saver password.  In this case, I put the screen saver 5 min.  While not as ideal as having virtual machines to run as a service such as server, I found very few cases where this workaroun isn't enough.  Autostart VMs without logging on means that your host is really act as a server, so better to build your host as a server, rather than a desktop computer.

  The fact that server is problematic on Vista and Win7 host and server development seems stalled, I keep recommending Server on non-Windows Server based hosts.  But because you have Windows XP, and it is a version of Windows that VMWare Server was stable on, you have a very good chance to make it work.  I would just recommend that you do not upgrade your host to Vista or Win7.

• How can I prevent all automatic starts iTunes?

  Hello

  Is someone can you PLEASE advise me how I can prevent ITunes turning prematurely gray?  It starts with persistence without asking for confirmation.  I want to be able to achieve is to prevent ITunes automatically start under ANY circumstances.

  I have already completed THE steps to ignore my IPhone and IPad and Itunes isn't in any login script (as far as I can see).   Something is always load up and leads me into the wall

  What seems to be incited ITunes at startup was a message saying that my Session of Apple (or something like that) had expired and I had to reconnect again...

  I found a solution a little backward... but I wonder if an Itunes update has restored this infuriating behavior and to make it worse, I remember not where I found the solution.

  Guidance would be MUCH appreciated.

  Steve

  Hacks to stop Bluetooth speaker to start iTunes-

  http://forums.MacRumors.com/ShowPost.php?p=19045335 & postcount = 4

  LincDavis August 2015 post - https://discussions.apple.com/message/28821151#28821151

• CD/DVGW SN - S082D question - Windows cannot start this hardware device Code 19

  I've had my laptop for a little over a year now and it's had its fair share of problems, which most is repairable or there is a solution.
  Earlier today, I inserted a disc in the drive and tried it opens, went into "My Computer" and find the disk was not displayed.

  It's happened a couple times and a simple reboot fixes the problem.
  I rebooted twice and this time, that the problem was not fixed, after going in 'Device Manager', I found there was a problem with the device and he gave me the following error message

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  As usual "search for the solutions" is useless and doesn't return any results.
  Thanks in advance for any response.

  Some info that may help
  OS: Windows Vista editions Home Premium
  Laptop model / number: Medion MD 98300
  DVD drive: TSSTCorp CD/DVD W SN-S082D ATA Device

  Thank you

  First of all, I wonder why you post this here in the Toshiba forum if you don t have a Toshiba laptop
  It's a little strange for me... anyway I'll try to help you.

  It seems that the registry keys are corrupt and so your CD/DVD drive does not work properly.

  Just try the proposed solution mentioned here in the doc of Microsoft:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.

• iBooks automatically starts an audio book... How to stop? Help please - thx!

  ... When I plug Apple EarPods, helmet or an audio jack in my car, iBooks automatically starts an audiobook... it happens all the time when I want to just listen to a song or answer the phone! How to stop?

  Help please - thx!

  I have this problem as well on an iPhone 6. I went to Audible for listening to audio books, but iBooks keeps opening and automatic reading a book that I wasn't even listening when I plug in my headphones. Sometimes there is a delay, then I will listen to something on Audible for a few seconds, and then it stops and be interrupted by iBooks from. It is really unpleasant.

  I really don't want anything to play automatically when I plug my headphones.

• Microsoft Office Starter take-out Device Manager

  Greetings, Ya'll!

  I had a few problems with this computer & it's one of several questions.

  My Microsoft Office Starter has stopped working, & the Microsoft forums say it is a matter of HP. Huh?

  I went through the procedure to uninstall Office Starter, & now that I'm going to re - install, rather than see a window asking me to purchase the update, etc..  with the button 'use' for the starter, I literally have to open, which takes me to avantureux window where are listed in the Microsoft Office 2010 tools, & startup of Microsoft Excel. During the 'open' '2010' it extends to 4 topics with "Microsoft Office Starter To - Go Device Manager" being one of them. Others refer to the "media library", "Upload center", & "picture manager.

  I am wary of this first 'Microsoft Office Starter To - Go Device Manager"because of the many other problems that I have with HP Support Assistant.

  In order to reactivate "Office Starter" I am opening this 'Device Manager to take away"to reactivate"Office Starter? And if so,..., why the procedure from HP support does not include instructions of this 'law' in sound?

  Deeply, I'd appreciate any help Knowledgable Tya you could give me.

  Hello:

  I have used this method successfully reinstall Office Starter 2010.

  I zipped and attached the file to download Office Starter (under attachments below), you can unzip and run.

  You must be connected to the internet so that it works, that the contacts of the MS Office Starter 2010 download the server files.

  He reloaded everything for me very well (and several other members of the forum also).

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Application will automatically start

  I have a PC that runs an application automatically at startup and stops at Windows and the PC when you exit the application.  I checked the boot menu (one profile) and a few keys in the registry but found nothing.  Always the application automatically starts when it is started in Mode safe.  If not, where can I get?

  Looks like you need to run the free software "Autoruns".  It shows practically everything that runs at startup and gives you the ability to disable one of them.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en